linux/drivers/net/ethernet/intel/i40e/i40e_nvm.c
Shannon Nelson a4bcfbb706 i40e: rework shadow ram read functions
Rework Shadow RAM read word/buffer functions to not use AQ Request
Resource commands.  Requesting resource is not needed for SR read
operations which are done through SRCTL register.  Access to SR through
register is controlled through DONE bit within SRCTL.  With this change
we do not block whole NVM resource for SR read operations.

Change-Id: I73e96cdea39a45ee7b5bdf038e527308de2d9efe
Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-07 21:50:01 -08:00

357 lines
10 KiB
C

/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Driver
* Copyright(c) 2013 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Contact Information:
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
******************************************************************************/
#include "i40e_prototype.h"
/**
* i40e_init_nvm_ops - Initialize NVM function pointers.
* @hw: pointer to the HW structure.
*
* Setups the function pointers and the NVM info structure. Should be called
* once per NVM initialization, e.g. inside the i40e_init_shared_code().
* Please notice that the NVM term is used here (& in all methods covered
* in this file) as an equivalent of the FLASH part mapped into the SR.
* We are accessing FLASH always thru the Shadow RAM.
**/
i40e_status i40e_init_nvm(struct i40e_hw *hw)
{
struct i40e_nvm_info *nvm = &hw->nvm;
i40e_status ret_code = 0;
u32 fla, gens;
u8 sr_size;
/* The SR size is stored regardless of the nvm programming mode
* as the blank mode may be used in the factory line.
*/
gens = rd32(hw, I40E_GLNVM_GENS);
sr_size = ((gens & I40E_GLNVM_GENS_SR_SIZE_MASK) >>
I40E_GLNVM_GENS_SR_SIZE_SHIFT);
/* Switching to words (sr_size contains power of 2KB). */
nvm->sr_size = (1 << sr_size) * I40E_SR_WORDS_IN_1KB;
/* Check if we are in the normal or blank NVM programming mode. */
fla = rd32(hw, I40E_GLNVM_FLA);
if (fla & I40E_GLNVM_FLA_LOCKED_MASK) { /* Normal programming mode. */
/* Max NVM timeout. */
nvm->timeout = I40E_MAX_NVM_TIMEOUT;
nvm->blank_nvm_mode = false;
} else { /* Blank programming mode. */
nvm->blank_nvm_mode = true;
ret_code = I40E_ERR_NVM_BLANK_MODE;
hw_dbg(hw, "NVM init error: unsupported blank mode.\n");
}
return ret_code;
}
/**
* i40e_acquire_nvm - Generic request for acquiring the NVM ownership.
* @hw: pointer to the HW structure.
* @access: NVM access type (read or write).
*
* This function will request NVM ownership for reading
* via the proper Admin Command.
**/
i40e_status i40e_acquire_nvm(struct i40e_hw *hw,
enum i40e_aq_resource_access_type access)
{
i40e_status ret_code = 0;
u64 gtime, timeout;
u64 time = 0;
if (hw->nvm.blank_nvm_mode)
goto i40e_i40e_acquire_nvm_exit;
ret_code = i40e_aq_request_resource(hw, I40E_NVM_RESOURCE_ID, access,
0, &time, NULL);
/* Reading the Global Device Timer. */
gtime = rd32(hw, I40E_GLVFGEN_TIMER);
/* Store the timeout. */
hw->nvm.hw_semaphore_timeout = I40E_MS_TO_GTIME(time) + gtime;
if (ret_code) {
/* Set the polling timeout. */
if (time > I40E_MAX_NVM_TIMEOUT)
timeout = I40E_MS_TO_GTIME(I40E_MAX_NVM_TIMEOUT)
+ gtime;
else
timeout = hw->nvm.hw_semaphore_timeout;
/* Poll until the current NVM owner timeouts. */
while (gtime < timeout) {
usleep_range(10000, 20000);
ret_code = i40e_aq_request_resource(hw,
I40E_NVM_RESOURCE_ID,
access, 0, &time,
NULL);
if (!ret_code) {
hw->nvm.hw_semaphore_timeout =
I40E_MS_TO_GTIME(time) + gtime;
break;
}
gtime = rd32(hw, I40E_GLVFGEN_TIMER);
}
if (ret_code) {
hw->nvm.hw_semaphore_timeout = 0;
hw->nvm.hw_semaphore_wait =
I40E_MS_TO_GTIME(time) + gtime;
hw_dbg(hw, "NVM acquire timed out, wait %llu ms before trying again.\n",
time);
}
}
i40e_i40e_acquire_nvm_exit:
return ret_code;
}
/**
* i40e_release_nvm - Generic request for releasing the NVM ownership.
* @hw: pointer to the HW structure.
*
* This function will release NVM resource via the proper Admin Command.
**/
void i40e_release_nvm(struct i40e_hw *hw)
{
if (!hw->nvm.blank_nvm_mode)
i40e_aq_release_resource(hw, I40E_NVM_RESOURCE_ID, 0, NULL);
}
/**
* i40e_poll_sr_srctl_done_bit - Polls the GLNVM_SRCTL done bit.
* @hw: pointer to the HW structure.
*
* Polls the SRCTL Shadow RAM register done bit.
**/
static i40e_status i40e_poll_sr_srctl_done_bit(struct i40e_hw *hw)
{
i40e_status ret_code = I40E_ERR_TIMEOUT;
u32 srctl, wait_cnt;
/* Poll the I40E_GLNVM_SRCTL until the done bit is set. */
for (wait_cnt = 0; wait_cnt < I40E_SRRD_SRCTL_ATTEMPTS; wait_cnt++) {
srctl = rd32(hw, I40E_GLNVM_SRCTL);
if (srctl & I40E_GLNVM_SRCTL_DONE_MASK) {
ret_code = 0;
break;
}
udelay(5);
}
if (ret_code == I40E_ERR_TIMEOUT)
hw_dbg(hw, "Done bit in GLNVM_SRCTL not set");
return ret_code;
}
/**
* i40e_read_nvm_word - Reads Shadow RAM
* @hw: pointer to the HW structure.
* @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
* @data: word read from the Shadow RAM.
*
* Reads 16 bit word from the Shadow RAM using the GLNVM_SRCTL register.
**/
i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
u16 *data)
{
i40e_status ret_code = I40E_ERR_TIMEOUT;
u32 sr_reg;
if (offset >= hw->nvm.sr_size) {
hw_dbg(hw, "NVM read error: Offset beyond Shadow RAM limit.\n");
ret_code = I40E_ERR_PARAM;
goto read_nvm_exit;
}
/* Poll the done bit first. */
ret_code = i40e_poll_sr_srctl_done_bit(hw);
if (!ret_code) {
/* Write the address and start reading. */
sr_reg = (u32)(offset << I40E_GLNVM_SRCTL_ADDR_SHIFT) |
(1 << I40E_GLNVM_SRCTL_START_SHIFT);
wr32(hw, I40E_GLNVM_SRCTL, sr_reg);
/* Poll I40E_GLNVM_SRCTL until the done bit is set. */
ret_code = i40e_poll_sr_srctl_done_bit(hw);
if (!ret_code) {
sr_reg = rd32(hw, I40E_GLNVM_SRDATA);
*data = (u16)((sr_reg &
I40E_GLNVM_SRDATA_RDDATA_MASK)
>> I40E_GLNVM_SRDATA_RDDATA_SHIFT);
}
}
if (ret_code)
hw_dbg(hw, "NVM read error: Couldn't access Shadow RAM address: 0x%x\n",
offset);
read_nvm_exit:
return ret_code;
}
/**
* i40e_read_nvm_buffer - Reads Shadow RAM buffer.
* @hw: pointer to the HW structure.
* @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
* @words: number of words to read (in) &
* number of words read before the NVM ownership timeout (out).
* @data: words read from the Shadow RAM.
*
* Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd()
* method. The buffer read is preceded by the NVM ownership take
* and followed by the release.
**/
i40e_status i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
u16 *words, u16 *data)
{
i40e_status ret_code = 0;
u16 index, word;
/* Loop thru the selected region. */
for (word = 0; word < *words; word++) {
index = offset + word;
ret_code = i40e_read_nvm_word(hw, index, &data[word]);
if (ret_code)
break;
}
/* Update the number of words read from the Shadow RAM. */
*words = word;
return ret_code;
}
/**
* i40e_calc_nvm_checksum - Calculates and returns the checksum
* @hw: pointer to hardware structure
*
* This function calculate SW Checksum that covers the whole 64kB shadow RAM
* except the VPD and PCIe ALT Auto-load modules. The structure and size of VPD
* is customer specific and unknown. Therefore, this function skips all maximum
* possible size of VPD (1kB).
**/
static i40e_status i40e_calc_nvm_checksum(struct i40e_hw *hw,
u16 *checksum)
{
i40e_status ret_code = 0;
u16 pcie_alt_module = 0;
u16 checksum_local = 0;
u16 vpd_module = 0;
u16 word = 0;
u32 i = 0;
/* read pointer to VPD area */
ret_code = i40e_read_nvm_word(hw, I40E_SR_VPD_PTR, &vpd_module);
if (ret_code) {
ret_code = I40E_ERR_NVM_CHECKSUM;
goto i40e_calc_nvm_checksum_exit;
}
/* read pointer to PCIe Alt Auto-load module */
ret_code = i40e_read_nvm_word(hw, I40E_SR_PCIE_ALT_AUTO_LOAD_PTR,
&pcie_alt_module);
if (ret_code) {
ret_code = I40E_ERR_NVM_CHECKSUM;
goto i40e_calc_nvm_checksum_exit;
}
/* Calculate SW checksum that covers the whole 64kB shadow RAM
* except the VPD and PCIe ALT Auto-load modules
*/
for (i = 0; i < hw->nvm.sr_size; i++) {
/* Skip Checksum word */
if (i == I40E_SR_SW_CHECKSUM_WORD)
i++;
/* Skip VPD module (convert byte size to word count) */
if (i == (u32)vpd_module) {
i += (I40E_SR_VPD_MODULE_MAX_SIZE / 2);
if (i >= hw->nvm.sr_size)
break;
}
/* Skip PCIe ALT module (convert byte size to word count) */
if (i == (u32)pcie_alt_module) {
i += (I40E_SR_PCIE_ALT_MODULE_MAX_SIZE / 2);
if (i >= hw->nvm.sr_size)
break;
}
ret_code = i40e_read_nvm_word(hw, (u16)i, &word);
if (ret_code) {
ret_code = I40E_ERR_NVM_CHECKSUM;
goto i40e_calc_nvm_checksum_exit;
}
checksum_local += word;
}
*checksum = (u16)I40E_SR_SW_CHECKSUM_BASE - checksum_local;
i40e_calc_nvm_checksum_exit:
return ret_code;
}
/**
* i40e_validate_nvm_checksum - Validate EEPROM checksum
* @hw: pointer to hardware structure
* @checksum: calculated checksum
*
* Performs checksum calculation and validates the NVM SW checksum. If the
* caller does not need checksum, the value can be NULL.
**/
i40e_status i40e_validate_nvm_checksum(struct i40e_hw *hw,
u16 *checksum)
{
i40e_status ret_code = 0;
u16 checksum_sr = 0;
u16 checksum_local;
ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
if (ret_code)
goto i40e_validate_nvm_checksum_exit;
ret_code = i40e_calc_nvm_checksum(hw, &checksum_local);
if (ret_code)
goto i40e_validate_nvm_checksum_free;
/* Do not use i40e_read_nvm_word() because we do not want to take
* the synchronization semaphores twice here.
*/
i40e_read_nvm_word(hw, I40E_SR_SW_CHECKSUM_WORD, &checksum_sr);
/* Verify read checksum from EEPROM is the same as
* calculated checksum
*/
if (checksum_local != checksum_sr)
ret_code = I40E_ERR_NVM_CHECKSUM;
/* If the user cares, return the calculated checksum */
if (checksum)
*checksum = checksum_local;
i40e_validate_nvm_checksum_free:
i40e_release_nvm(hw);
i40e_validate_nvm_checksum_exit:
return ret_code;
}