linux/drivers/iio/accel/kxsd9-spi.c
Linus Walleij 9a9a369d61 iio: accel: kxsd9: Deploy system and runtime PM
This deploys runtime and system PM in the KXSD9 driver:

- Use the force_runtime_suspend/resume callbacks as system PM
  operations.

- Add buffer prepare/unprepare callbacks to grab the runtime
  PM while we're using buffered reads and put get/put_autosuspend
  in these.

- Insert get/put_autosuspend calls anywhere the IO is used from
  the raw read/write callbacks.

- Move the fullscale setting to be cached in the state container
  so we can restore it properly when coming back from
  system/runtime suspend.

- Set the autosuspend delay to two orders of magnitude that of
  the sensor start-up time (20ms) so we will autosuspend after
  2s.

- Register the callbacks in both the SPI and I2C subdrivers.

Tested with the I2C KXSD9 on the Qualcomm APQ8060 Dragonboard.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:35:59 +01:00

57 lines
1.2 KiB
C

#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#include "kxsd9.h"
static int kxsd9_spi_probe(struct spi_device *spi)
{
static const struct regmap_config config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0x0e,
};
struct regmap *regmap;
spi->mode = SPI_MODE_0;
regmap = devm_regmap_init_spi(spi, &config);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
__func__, PTR_ERR(regmap));
return PTR_ERR(regmap);
}
return kxsd9_common_probe(&spi->dev,
regmap,
spi_get_device_id(spi)->name);
}
static int kxsd9_spi_remove(struct spi_device *spi)
{
return kxsd9_common_remove(&spi->dev);
}
static const struct spi_device_id kxsd9_spi_id[] = {
{"kxsd9", 0},
{ },
};
MODULE_DEVICE_TABLE(spi, kxsd9_spi_id);
static struct spi_driver kxsd9_spi_driver = {
.driver = {
.name = "kxsd9",
.pm = &kxsd9_dev_pm_ops,
},
.probe = kxsd9_spi_probe,
.remove = kxsd9_spi_remove,
.id_table = kxsd9_spi_id,
};
module_spi_driver(kxsd9_spi_driver);
MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
MODULE_DESCRIPTION("Kionix KXSD9 SPI driver");
MODULE_LICENSE("GPL v2");