linux/arch/microblaze/Makefile
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00

100 lines
3.3 KiB
Makefile

ifeq ($(CONFIG_MMU),y)
UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
else
UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
endif
# What CPU vesion are we building for, and crack it open
# as major.minor.rev
CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
CPU_REV := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
# Use cpu-related CONFIG_ vars to set compile options.
# The various CONFIG_XILINX cpu features options are integers 0/1/2...
# rather than bools y/n
# Work out HW multipler support. This is tricky.
# 1. Spartan2 has no HW multipliers.
# 2. MicroBlaze v3.x always uses them, except in Spartan 2
# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
ifeq ($(CPU_MAJOR),3)
CPUFLAGS-1 += -mno-xl-soft-mul
else
# USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
endif
endif
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# r31 holds current when in kernel mode
KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
LDFLAGS :=
LDFLAGS_vmlinux :=
head-y := arch/microblaze/kernel/head.o
libs-y += arch/microblaze/lib/
core-y += arch/microblaze/kernel/
core-y += arch/microblaze/mm/
core-y += arch/microblaze/platform/
core-$(CONFIG_PCI) += arch/microblaze/pci/
drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
boot := arch/microblaze/boot
# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
ifneq ($(DTB),)
core-y += $(boot)/
endif
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
MMU := -nommu
endif
export MMU DTB
all: linux.bin
# With make 3.82 we cannot mix normal and wildcard targets
BOOT_TARGETS1 = linux.bin linux.bin.gz
BOOT_TARGETS2 = simpleImage.%
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
$(BOOT_TARGETS1): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
$(BOOT_TARGETS2): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
define archhelp
echo '* linux.bin - Create raw binary'
echo ' linux.bin.gz - Create compressed raw binary'
echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
echo ' - stripped elf with fdt blob'
echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob'
echo ' *_defconfig - Select default config from arch/microblaze/configs'
echo ''
echo ' Targets with <dt> embed a device tree blob inside the image'
echo ' These targets support board with firmware that does not'
echo ' support passing a device tree directly. Replace <dt> with the'
echo ' name of a dts file from the arch/microblaze/boot/dts/ directory'
echo ' (minus the .dts extension).'
endef
MRPROPER_FILES += $(boot)/simpleImage.*