linux/net/batman-adv/bat_v.c
Antonio Quartulli b6cf5d499f batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP event
At the moment there is no explicit reactivation of an hard-interface
upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is
reactivated as soon as the next OGM is scheduled for sending, but this
mechanism does not work with B.A.T.M.A.N. V. The latter does not rely
on the same scheduling mechanism as its predecessor and for this reason
the hard-interface remains deactivated forever after being brought down
once.

This patch fixes the reactivation mechanism by adding a new routing API
which explicitly allows each algorithm to perform any needed operation
upon interface re-activation.

Such API is optional and is implemented by B.A.T.M.A.N. V only and it
just takes care of setting the iface status to ACTIVE

Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29 19:46:11 +08:00

360 lines
10 KiB
C

/* Copyright (C) 2013-2016 B.A.T.M.A.N. contributors:
*
* Linus Lüssing, Marek Lindner
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "bat_algo.h"
#include "main.h"
#include <linux/atomic.h>
#include <linux/bug.h>
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/netdevice.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
#include <linux/seq_file.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include "bat_v_elp.h"
#include "bat_v_ogm.h"
#include "hard-interface.h"
#include "hash.h"
#include "originator.h"
#include "packet.h"
static void batadv_v_iface_activate(struct batadv_hard_iface *hard_iface)
{
/* B.A.T.M.A.N. V does not use any queuing mechanism, therefore it can
* set the interface as ACTIVE right away, without any risk of race
* condition
*/
if (hard_iface->if_status == BATADV_IF_TO_BE_ACTIVATED)
hard_iface->if_status = BATADV_IF_ACTIVE;
}
static int batadv_v_iface_enable(struct batadv_hard_iface *hard_iface)
{
int ret;
ret = batadv_v_elp_iface_enable(hard_iface);
if (ret < 0)
return ret;
ret = batadv_v_ogm_iface_enable(hard_iface);
if (ret < 0)
batadv_v_elp_iface_disable(hard_iface);
/* enable link throughput auto-detection by setting the throughput
* override to zero
*/
atomic_set(&hard_iface->bat_v.throughput_override, 0);
return ret;
}
static void batadv_v_iface_disable(struct batadv_hard_iface *hard_iface)
{
batadv_v_elp_iface_disable(hard_iface);
}
static void batadv_v_iface_update_mac(struct batadv_hard_iface *hard_iface)
{
}
static void batadv_v_primary_iface_set(struct batadv_hard_iface *hard_iface)
{
batadv_v_elp_primary_iface_set(hard_iface);
batadv_v_ogm_primary_iface_set(hard_iface);
}
static void
batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh)
{
ewma_throughput_init(&hardif_neigh->bat_v.throughput);
INIT_WORK(&hardif_neigh->bat_v.metric_work,
batadv_v_elp_throughput_metric_update);
}
static void batadv_v_ogm_schedule(struct batadv_hard_iface *hard_iface)
{
}
static void batadv_v_ogm_emit(struct batadv_forw_packet *forw_packet)
{
}
/**
* batadv_v_orig_print_neigh - print neighbors for the originator table
* @orig_node: the orig_node for which the neighbors are printed
* @if_outgoing: outgoing interface for these entries
* @seq: debugfs table seq_file struct
*
* Must be called while holding an rcu lock.
*/
static void
batadv_v_orig_print_neigh(struct batadv_orig_node *orig_node,
struct batadv_hard_iface *if_outgoing,
struct seq_file *seq)
{
struct batadv_neigh_node *neigh_node;
struct batadv_neigh_ifinfo *n_ifinfo;
hlist_for_each_entry_rcu(neigh_node, &orig_node->neigh_list, list) {
n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing);
if (!n_ifinfo)
continue;
seq_printf(seq, " %pM (%9u.%1u)",
neigh_node->addr,
n_ifinfo->bat_v.throughput / 10,
n_ifinfo->bat_v.throughput % 10);
batadv_neigh_ifinfo_put(n_ifinfo);
}
}
/**
* batadv_v_hardif_neigh_print - print a single ELP neighbour node
* @seq: neighbour table seq_file struct
* @hardif_neigh: hardif neighbour information
*/
static void
batadv_v_hardif_neigh_print(struct seq_file *seq,
struct batadv_hardif_neigh_node *hardif_neigh)
{
int last_secs, last_msecs;
u32 throughput;
last_secs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) / 1000;
last_msecs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) % 1000;
throughput = ewma_throughput_read(&hardif_neigh->bat_v.throughput);
seq_printf(seq, "%pM %4i.%03is (%9u.%1u) [%10s]\n",
hardif_neigh->addr, last_secs, last_msecs, throughput / 10,
throughput % 10, hardif_neigh->if_incoming->net_dev->name);
}
/**
* batadv_v_neigh_print - print the single hop neighbour list
* @bat_priv: the bat priv with all the soft interface information
* @seq: neighbour table seq_file struct
*/
static void batadv_v_neigh_print(struct batadv_priv *bat_priv,
struct seq_file *seq)
{
struct net_device *net_dev = (struct net_device *)seq->private;
struct batadv_hardif_neigh_node *hardif_neigh;
struct batadv_hard_iface *hard_iface;
int batman_count = 0;
seq_printf(seq, " %-15s %s (%11s) [%10s]\n", "Neighbor",
"last-seen", "throughput", "IF");
rcu_read_lock();
list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) {
if (hard_iface->soft_iface != net_dev)
continue;
hlist_for_each_entry_rcu(hardif_neigh,
&hard_iface->neigh_list, list) {
batadv_v_hardif_neigh_print(seq, hardif_neigh);
batman_count++;
}
}
rcu_read_unlock();
if (batman_count == 0)
seq_puts(seq, "No batman nodes in range ...\n");
}
/**
* batadv_v_orig_print - print the originator table
* @bat_priv: the bat priv with all the soft interface information
* @seq: debugfs table seq_file struct
* @if_outgoing: the outgoing interface for which this should be printed
*/
static void batadv_v_orig_print(struct batadv_priv *bat_priv,
struct seq_file *seq,
struct batadv_hard_iface *if_outgoing)
{
struct batadv_neigh_node *neigh_node;
struct batadv_hashtable *hash = bat_priv->orig_hash;
int last_seen_msecs, last_seen_secs;
struct batadv_orig_node *orig_node;
struct batadv_neigh_ifinfo *n_ifinfo;
unsigned long last_seen_jiffies;
struct hlist_head *head;
int batman_count = 0;
u32 i;
seq_printf(seq, " %-15s %s (%11s) %17s [%10s]: %20s ...\n",
"Originator", "last-seen", "throughput", "Nexthop",
"outgoingIF", "Potential nexthops");
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
neigh_node = batadv_orig_router_get(orig_node,
if_outgoing);
if (!neigh_node)
continue;
n_ifinfo = batadv_neigh_ifinfo_get(neigh_node,
if_outgoing);
if (!n_ifinfo)
goto next;
last_seen_jiffies = jiffies - orig_node->last_seen;
last_seen_msecs = jiffies_to_msecs(last_seen_jiffies);
last_seen_secs = last_seen_msecs / 1000;
last_seen_msecs = last_seen_msecs % 1000;
seq_printf(seq, "%pM %4i.%03is (%9u.%1u) %pM [%10s]:",
orig_node->orig, last_seen_secs,
last_seen_msecs,
n_ifinfo->bat_v.throughput / 10,
n_ifinfo->bat_v.throughput % 10,
neigh_node->addr,
neigh_node->if_incoming->net_dev->name);
batadv_v_orig_print_neigh(orig_node, if_outgoing, seq);
seq_puts(seq, "\n");
batman_count++;
next:
batadv_neigh_node_put(neigh_node);
if (n_ifinfo)
batadv_neigh_ifinfo_put(n_ifinfo);
}
rcu_read_unlock();
}
if (batman_count == 0)
seq_puts(seq, "No batman nodes in range ...\n");
}
static int batadv_v_neigh_cmp(struct batadv_neigh_node *neigh1,
struct batadv_hard_iface *if_outgoing1,
struct batadv_neigh_node *neigh2,
struct batadv_hard_iface *if_outgoing2)
{
struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2;
ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1);
ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2);
if (WARN_ON(!ifinfo1 || !ifinfo2))
return 0;
return ifinfo1->bat_v.throughput - ifinfo2->bat_v.throughput;
}
static bool batadv_v_neigh_is_sob(struct batadv_neigh_node *neigh1,
struct batadv_hard_iface *if_outgoing1,
struct batadv_neigh_node *neigh2,
struct batadv_hard_iface *if_outgoing2)
{
struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2;
u32 threshold;
ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1);
ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2);
threshold = ifinfo1->bat_v.throughput / 4;
threshold = ifinfo1->bat_v.throughput - threshold;
return ifinfo2->bat_v.throughput > threshold;
}
static struct batadv_algo_ops batadv_batman_v __read_mostly = {
.name = "BATMAN_V",
.bat_iface_activate = batadv_v_iface_activate,
.bat_iface_enable = batadv_v_iface_enable,
.bat_iface_disable = batadv_v_iface_disable,
.bat_iface_update_mac = batadv_v_iface_update_mac,
.bat_primary_iface_set = batadv_v_primary_iface_set,
.bat_hardif_neigh_init = batadv_v_hardif_neigh_init,
.bat_ogm_emit = batadv_v_ogm_emit,
.bat_ogm_schedule = batadv_v_ogm_schedule,
.bat_orig_print = batadv_v_orig_print,
.bat_neigh_cmp = batadv_v_neigh_cmp,
.bat_neigh_is_similar_or_better = batadv_v_neigh_is_sob,
.bat_neigh_print = batadv_v_neigh_print,
};
/**
* batadv_v_mesh_init - initialize the B.A.T.M.A.N. V private resources for a
* mesh
* @bat_priv: the object representing the mesh interface to initialise
*
* Return: 0 on success or a negative error code otherwise
*/
int batadv_v_mesh_init(struct batadv_priv *bat_priv)
{
return batadv_v_ogm_init(bat_priv);
}
/**
* batadv_v_mesh_free - free the B.A.T.M.A.N. V private resources for a mesh
* @bat_priv: the object representing the mesh interface to free
*/
void batadv_v_mesh_free(struct batadv_priv *bat_priv)
{
batadv_v_ogm_free(bat_priv);
}
/**
* batadv_v_init - B.A.T.M.A.N. V initialization function
*
* Description: Takes care of initializing all the subcomponents.
* It is invoked upon module load only.
*
* Return: 0 on success or a negative error code otherwise
*/
int __init batadv_v_init(void)
{
int ret;
/* B.A.T.M.A.N. V echo location protocol packet */
ret = batadv_recv_handler_register(BATADV_ELP,
batadv_v_elp_packet_recv);
if (ret < 0)
return ret;
ret = batadv_recv_handler_register(BATADV_OGM2,
batadv_v_ogm_packet_recv);
if (ret < 0)
goto elp_unregister;
ret = batadv_algo_register(&batadv_batman_v);
if (ret < 0)
goto ogm_unregister;
return ret;
ogm_unregister:
batadv_recv_handler_unregister(BATADV_OGM2);
elp_unregister:
batadv_recv_handler_unregister(BATADV_ELP);
return ret;
}