linux/include/scsi/osd_ore.h
Boaz Harrosh a1fec1dbbc ore: RAID5 read
This patch introduces the first stage of RAID5 support
mainly the skip-over-raid-units when reading. For
writes it inserts BLANK units, into where XOR blocks
should be calculated and written to.

It introduces the new "general raid maths", and the main
additional parameters and components needed for raid5.

Since at this stage it could corrupt future version that
actually do support raid5. The enablement of raid5
mounting and setting of parity-count > 0 is disabled. So
the raid5 code will never be used. Mounting of raid5 is
only enabled later once the basic XOR write is also in.
But if the patch "enable RAID5" is applied this code has
been tested to be able to properly read raid5 volumes
and is according to standard.

Also it has been tested that the new maths still properly
supports RAID0 and grouping code just as before.
(BTW: I have found more bugs in the pnfs-obj RAID math
 fixed here)

The ore.c file is getting too big, so new ore_raid.[hc]
files are added that will include the special raid stuff
that are not used in striping and mirrors. In future write
support these will get bigger.
When adding the ore_raid.c to Kbuild file I was forced to
rename ore.ko to libore.ko. Is it possible to keep source
file, say ore.c and module file ore.ko the same even if there
are multiple files inside ore.ko?

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 16:55:36 -07:00

191 lines
5 KiB
C

/*
* Copyright (C) 2011
* Boaz Harrosh <bharrosh@panasas.com>
*
* Public Declarations of the ORE API
*
* This file is part of the ORE (Object Raid Engine) library.
*
* ORE is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation. (GPL v2)
*
* ORE is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the ORE; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __ORE_H__
#define __ORE_H__
#include <scsi/osd_initiator.h>
#include <scsi/osd_attributes.h>
#include <scsi/osd_sec.h>
#include <linux/pnfs_osd_xdr.h>
struct ore_comp {
struct osd_obj_id obj;
u8 cred[OSD_CAP_LEN];
};
struct ore_layout {
/* Our way of looking at the data_map */
enum pnfs_osd_raid_algorithm4
raid_algorithm;
unsigned stripe_unit;
unsigned mirrors_p1;
unsigned group_width;
unsigned parity;
u64 group_depth;
unsigned group_count;
/* Cached often needed calculations filled in by
* ore_verify_layout
*/
unsigned long max_io_length; /* Max length that should be passed to
* ore_get_rw_state
*/
};
struct ore_dev {
struct osd_dev *od;
};
struct ore_components {
unsigned first_dev; /* First logical device no */
unsigned numdevs; /* Num of devices in array */
/* If @single_comp == EC_SINGLE_COMP, @comps points to a single
* component. else there are @numdevs components
*/
enum EC_COMP_USAGE {
EC_SINGLE_COMP = 0, EC_MULTPLE_COMPS = 0xffffffff
} single_comp;
struct ore_comp *comps;
/* Array of pointers to ore_dev-* . User will usually have these pointed
* too a bigger struct which contain an "ore_dev ored" member and use
* container_of(oc->ods[i], struct foo_dev, ored) to access the bigger
* structure.
*/
struct ore_dev **ods;
};
/* ore_comp_dev Recievies a logical device index */
static inline struct osd_dev *ore_comp_dev(
const struct ore_components *oc, unsigned i)
{
BUG_ON((i < oc->first_dev) || (oc->first_dev + oc->numdevs <= i));
return oc->ods[i - oc->first_dev]->od;
}
static inline void ore_comp_set_dev(
struct ore_components *oc, unsigned i, struct osd_dev *od)
{
oc->ods[i - oc->first_dev]->od = od;
}
struct ore_striping_info {
u64 offset;
u64 obj_offset;
u64 length;
u64 first_stripe_start; /* only used in raid writes */
u64 M; /* for truncate */
unsigned bytes_in_stripe;
unsigned dev;
unsigned par_dev;
unsigned unit_off;
unsigned cur_comp;
};
struct ore_io_state;
typedef void (*ore_io_done_fn)(struct ore_io_state *ios, void *private);
struct ore_io_state {
struct kref kref;
struct ore_striping_info si;
void *private;
ore_io_done_fn done;
struct ore_layout *layout;
struct ore_components *oc;
/* Global read/write IO*/
loff_t offset;
unsigned long length;
void *kern_buff;
struct page **pages;
unsigned nr_pages;
unsigned pgbase;
unsigned pages_consumed;
/* Attributes */
unsigned in_attr_len;
struct osd_attr *in_attr;
unsigned out_attr_len;
struct osd_attr *out_attr;
bool reading;
/* House keeping of Parity pages */
bool extra_part_alloc;
struct page **parity_pages;
unsigned max_par_pages;
unsigned cur_par_page;
unsigned sgs_per_dev;
/* Variable array of size numdevs */
unsigned numdevs;
struct ore_per_dev_state {
struct osd_request *or;
struct bio *bio;
loff_t offset;
unsigned length;
unsigned last_sgs_total;
unsigned dev;
struct osd_sg_entry *sglist;
unsigned cur_sg;
} per_dev[];
};
static inline unsigned ore_io_state_size(unsigned numdevs)
{
return sizeof(struct ore_io_state) +
sizeof(struct ore_per_dev_state) * numdevs;
}
/* ore.c */
int ore_verify_layout(unsigned total_comps, struct ore_layout *layout);
void ore_calc_stripe_info(struct ore_layout *layout, u64 file_offset,
u64 length, struct ore_striping_info *si);
int ore_get_rw_state(struct ore_layout *layout, struct ore_components *comps,
bool is_reading, u64 offset, u64 length,
struct ore_io_state **ios);
int ore_get_io_state(struct ore_layout *layout, struct ore_components *comps,
struct ore_io_state **ios);
void ore_put_io_state(struct ore_io_state *ios);
typedef void (*ore_on_dev_error)(struct ore_io_state *ios, struct ore_dev *od,
unsigned dev_index, enum osd_err_priority oep,
u64 dev_offset, u64 dev_len);
int ore_check_io(struct ore_io_state *ios, ore_on_dev_error rep);
int ore_create(struct ore_io_state *ios);
int ore_remove(struct ore_io_state *ios);
int ore_write(struct ore_io_state *ios);
int ore_read(struct ore_io_state *ios);
int ore_truncate(struct ore_layout *layout, struct ore_components *comps,
u64 size);
int extract_attr_from_ios(struct ore_io_state *ios, struct osd_attr *attr);
extern const struct osd_attr g_attr_logical_length;
#endif