linux/arch/powerpc/platforms/cell/cbe_thermal.c
Andi Kleen 4a0b2b4dbe sysdev: Pass the attribute to the low level sysdev show/store function
This allow to dynamically generate attributes and share show/store
functions between attributes. Right now most attributes are generated
by special macros and lots of duplicated code. With the attribute
passed it's instead possible to attach some data to the attribute
and then use that in shared low level functions to do different things.

I need this for the dynamically generated bank attributes in the x86
machine check code, but it'll allow some further cleanups.

I converted all users in tree to the new show/store prototype. It's a single
huge patch to avoid unbisectable sections.

Runtime tested: x86-32, x86-64
Compiled only: ia64, powerpc
Not compile tested/only grep converted: sh, arm, avr32

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:55:02 -07:00

400 lines
10 KiB
C

/*
* thermal support for the cell processor
*
* This module adds some sysfs attributes to cpu and spu nodes.
* Base for measurements are the digital thermal sensors (DTS)
* located on the chip.
* The accuracy is 2 degrees, starting from 65 up to 125 degrees celsius
* The attributes can be found under
* /sys/devices/system/cpu/cpuX/thermal
* /sys/devices/system/spu/spuX/thermal
*
* The following attributes are added for each node:
* temperature:
* contains the current temperature measured by the DTS
* throttle_begin:
* throttling begins when temperature is greater or equal to
* throttle_begin. Setting this value to 125 prevents throttling.
* throttle_end:
* throttling is being ceased, if the temperature is lower than
* throttle_end. Due to a delay between applying throttling and
* a reduced temperature this value should be less than throttle_begin.
* A value equal to throttle_begin provides only a very little hysteresis.
* throttle_full_stop:
* If the temperatrue is greater or equal to throttle_full_stop,
* full throttling is applied to the cpu or spu. This value should be
* greater than throttle_begin and throttle_end. Setting this value to
* 65 prevents the unit from running code at all.
*
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005
*
* Author: Christian Krafft <krafft@de.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/sysdev.h>
#include <linux/kernel.h>
#include <linux/cpu.h>
#include <asm/spu.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/cell-regs.h>
#include "spu_priv1_mmio.h"
#define TEMP_MIN 65
#define TEMP_MAX 125
#define SYSDEV_PREFIX_ATTR(_prefix,_name,_mode) \
struct sysdev_attribute attr_ ## _prefix ## _ ## _name = { \
.attr = { .name = __stringify(_name), .mode = _mode }, \
.show = _prefix ## _show_ ## _name, \
.store = _prefix ## _store_ ## _name, \
};
static inline u8 reg_to_temp(u8 reg_value)
{
return ((reg_value & 0x3f) << 1) + TEMP_MIN;
}
static inline u8 temp_to_reg(u8 temp)
{
return ((temp - TEMP_MIN) >> 1) & 0x3f;
}
static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
{
struct spu *spu;
spu = container_of(sysdev, struct spu, sysdev);
return cbe_get_pmd_regs(spu_devnode(spu));
}
/* returns the value for a given spu in a given register */
static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg)
{
union spe_reg value;
struct spu *spu;
spu = container_of(sysdev, struct spu, sysdev);
value.val = in_be64(&reg->val);
return value.spe[spu->spe_id];
}
static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr,
char *buf)
{
u8 value;
struct cbe_pmd_regs __iomem *pmd_regs;
pmd_regs = get_pmd_regs(sysdev);
value = spu_read_register_value(sysdev, &pmd_regs->ts_ctsr1);
return sprintf(buf, "%d\n", reg_to_temp(value));
}
static ssize_t show_throttle(struct cbe_pmd_regs __iomem *pmd_regs, char *buf, int pos)
{
u64 value;
value = in_be64(&pmd_regs->tm_tpr.val);
/* access the corresponding byte */
value >>= pos;
value &= 0x3F;
return sprintf(buf, "%d\n", reg_to_temp(value));
}
static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char *buf, size_t size, int pos)
{
u64 reg_value;
int temp;
u64 new_value;
int ret;
ret = sscanf(buf, "%u", &temp);
if (ret != 1 || temp < TEMP_MIN || temp > TEMP_MAX)
return -EINVAL;
new_value = temp_to_reg(temp);
reg_value = in_be64(&pmd_regs->tm_tpr.val);
/* zero out bits for new value */
reg_value &= ~(0xffull << pos);
/* set bits to new value */
reg_value |= new_value << pos;
out_be64(&pmd_regs->tm_tpr.val, reg_value);
return size;
}
static ssize_t spu_show_throttle_end(struct sys_device *sysdev,
struct sysdev_attribute *attr, char *buf)
{
return show_throttle(get_pmd_regs(sysdev), buf, 0);
}
static ssize_t spu_show_throttle_begin(struct sys_device *sysdev,
struct sysdev_attribute *attr, char *buf)
{
return show_throttle(get_pmd_regs(sysdev), buf, 8);
}
static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev,
struct sysdev_attribute *attr, char *buf)
{
return show_throttle(get_pmd_regs(sysdev), buf, 16);
}
static ssize_t spu_store_throttle_end(struct sys_device *sysdev,
struct sysdev_attribute *attr, const char *buf, size_t size)
{
return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
}
static ssize_t spu_store_throttle_begin(struct sys_device *sysdev,
struct sysdev_attribute *attr, const char *buf, size_t size)
{
return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
}
static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev,
struct sysdev_attribute *attr, const char *buf, size_t size)
{
return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
}
static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
{
struct cbe_pmd_regs __iomem *pmd_regs;
u64 value;
pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id);
value = in_be64(&pmd_regs->ts_ctsr2);
value = (value >> pos) & 0x3f;
return sprintf(buf, "%d\n", reg_to_temp(value));
}
/* shows the temperature of the DTS on the PPE,
* located near the linear thermal sensor */
static ssize_t ppe_show_temp0(struct sys_device *sysdev,
struct sysdev_attribute *attr, char *buf)
{
return ppe_show_temp(sysdev, buf, 32);
}
/* shows the temperature of the second DTS on the PPE */
static ssize_t ppe_show_temp1(struct sys_device *sysdev,
struct sysdev_attribute *attr, char *buf)
{
return ppe_show_temp(sysdev, buf, 0);
}
static ssize_t ppe_show_throttle_end(struct sys_device *sysdev,
struct sysdev_attribute *attr, char *buf)
{
return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
}
static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev,
struct sysdev_attribute *attr, char *buf)
{
return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
}
static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev,
struct sysdev_attribute *attr, char *buf)
{
return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
}
static ssize_t ppe_store_throttle_end(struct sys_device *sysdev,
struct sysdev_attribute *attr, const char *buf, size_t size)
{
return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
}
static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev,
struct sysdev_attribute *attr, const char *buf, size_t size)
{
return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
}
static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev,
struct sysdev_attribute *attr, const char *buf, size_t size)
{
return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
}
static struct sysdev_attribute attr_spu_temperature = {
.attr = {.name = "temperature", .mode = 0400 },
.show = spu_show_temp,
};
static SYSDEV_PREFIX_ATTR(spu, throttle_end, 0600);
static SYSDEV_PREFIX_ATTR(spu, throttle_begin, 0600);
static SYSDEV_PREFIX_ATTR(spu, throttle_full_stop, 0600);
static struct attribute *spu_attributes[] = {
&attr_spu_temperature.attr,
&attr_spu_throttle_end.attr,
&attr_spu_throttle_begin.attr,
&attr_spu_throttle_full_stop.attr,
NULL,
};
static struct attribute_group spu_attribute_group = {
.name = "thermal",
.attrs = spu_attributes,
};
static struct sysdev_attribute attr_ppe_temperature0 = {
.attr = {.name = "temperature0", .mode = 0400 },
.show = ppe_show_temp0,
};
static struct sysdev_attribute attr_ppe_temperature1 = {
.attr = {.name = "temperature1", .mode = 0400 },
.show = ppe_show_temp1,
};
static SYSDEV_PREFIX_ATTR(ppe, throttle_end, 0600);
static SYSDEV_PREFIX_ATTR(ppe, throttle_begin, 0600);
static SYSDEV_PREFIX_ATTR(ppe, throttle_full_stop, 0600);
static struct attribute *ppe_attributes[] = {
&attr_ppe_temperature0.attr,
&attr_ppe_temperature1.attr,
&attr_ppe_throttle_end.attr,
&attr_ppe_throttle_begin.attr,
&attr_ppe_throttle_full_stop.attr,
NULL,
};
static struct attribute_group ppe_attribute_group = {
.name = "thermal",
.attrs = ppe_attributes,
};
/*
* initialize throttling with default values
*/
static int __init init_default_values(void)
{
int cpu;
struct cbe_pmd_regs __iomem *pmd_regs;
struct sys_device *sysdev;
union ppe_spe_reg tpr;
union spe_reg str1;
u64 str2;
union spe_reg cr1;
u64 cr2;
/* TPR defaults */
/* ppe
* 1F - no full stop
* 08 - dynamic throttling starts if over 80 degrees
* 03 - dynamic throttling ceases if below 70 degrees */
tpr.ppe = 0x1F0803;
/* spe
* 10 - full stopped when over 96 degrees
* 08 - dynamic throttling starts if over 80 degrees
* 03 - dynamic throttling ceases if below 70 degrees
*/
tpr.spe = 0x100803;
/* STR defaults */
/* str1
* 10 - stop 16 of 32 cycles
*/
str1.val = 0x1010101010101010ull;
/* str2
* 10 - stop 16 of 32 cycles
*/
str2 = 0x10;
/* CR defaults */
/* cr1
* 4 - normal operation
*/
cr1.val = 0x0404040404040404ull;
/* cr2
* 4 - normal operation
*/
cr2 = 0x04;
for_each_possible_cpu (cpu) {
pr_debug("processing cpu %d\n", cpu);
sysdev = get_cpu_sysdev(cpu);
if (!sysdev) {
pr_info("invalid sysdev pointer for cbe_thermal\n");
return -EINVAL;
}
pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id);
if (!pmd_regs) {
pr_info("invalid CBE regs pointer for cbe_thermal\n");
return -EINVAL;
}
out_be64(&pmd_regs->tm_str2, str2);
out_be64(&pmd_regs->tm_str1.val, str1.val);
out_be64(&pmd_regs->tm_tpr.val, tpr.val);
out_be64(&pmd_regs->tm_cr1.val, cr1.val);
out_be64(&pmd_regs->tm_cr2, cr2);
}
return 0;
}
static int __init thermal_init(void)
{
int rc = init_default_values();
if (rc == 0) {
spu_add_sysdev_attr_group(&spu_attribute_group);
cpu_add_sysdev_attr_group(&ppe_attribute_group);
}
return rc;
}
module_init(thermal_init);
static void __exit thermal_exit(void)
{
spu_remove_sysdev_attr_group(&spu_attribute_group);
cpu_remove_sysdev_attr_group(&ppe_attribute_group);
}
module_exit(thermal_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");