linux/arch/x86/kernel/head_64.S
Thomas Gleixner 31eedd823c x86: zap invalid and unused pmds in early boot
The early boot code maps KERNEL_TEXT_SIZE (currently 40MB) starting
from __START_KERNEL_map. The kernel itself only needs _text to _end
mapped in the high alias. On relocatible kernels the ASM setup code
adjusts the compile time created high mappings to the relocation. This
creates invalid pmd entries for negative offsets:

0xffffffff80000000 -> pmd entry: ffffffffff2001e3
It points outside of the physical address space and is marked present.

This starts at the virtual address __START_KERNEL_map and goes up to
the point where the first valid physical address (0x0) is mapped.

Zap the mappings before _text and after _end right away in early
boot. This removes also the invalid entries.

Furthermore it simplifies the range check for high aliases.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-18 20:54:14 +01:00

457 lines
12 KiB
ArmAsm

/*
* linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit
*
* Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
* Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
* Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
* Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
*/
#include <linux/linkage.h>
#include <linux/threads.h>
#include <linux/init.h>
#include <asm/desc.h>
#include <asm/segment.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/msr.h>
#include <asm/cache.h>
#ifdef CONFIG_PARAVIRT
#include <asm/asm-offsets.h>
#include <asm/paravirt.h>
#else
#define GET_CR2_INTO_RCX movq %cr2, %rcx
#endif
/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
* because we need identity-mapped pages.
*
*/
.text
.section .text.head
.code64
.globl startup_64
startup_64:
/*
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
* and someone has loaded an identity mapped page table
* for us. These identity mapped page tables map all of the
* kernel pages and possibly all of memory.
*
* %esi holds a physical pointer to real_mode_data.
*
* We come here either directly from a 64bit bootloader, or from
* arch/x86_64/boot/compressed/head.S.
*
* We only come here initially at boot nothing else comes here.
*
* Since we may be loaded at an address different from what we were
* compiled to run at we first fixup the physical addresses in our page
* tables and then reload them.
*/
/* Compute the delta between the address I am compiled to run at and the
* address I am actually running at.
*/
leaq _text(%rip), %rbp
subq $_text - __START_KERNEL_map, %rbp
/* Is the address not 2M aligned? */
movq %rbp, %rax
andl $~PMD_PAGE_MASK, %eax
testl %eax, %eax
jnz bad_address
/* Is the address too large? */
leaq _text(%rip), %rdx
movq $PGDIR_SIZE, %rax
cmpq %rax, %rdx
jae bad_address
/* Fixup the physical addresses in the page table
*/
addq %rbp, init_level4_pgt + 0(%rip)
addq %rbp, init_level4_pgt + (258*8)(%rip)
addq %rbp, init_level4_pgt + (511*8)(%rip)
addq %rbp, level3_ident_pgt + 0(%rip)
addq %rbp, level3_kernel_pgt + (510*8)(%rip)
addq %rbp, level3_kernel_pgt + (511*8)(%rip)
addq %rbp, level2_fixmap_pgt + (506*8)(%rip)
/* Add an Identity mapping if I am above 1G */
leaq _text(%rip), %rdi
andq $PMD_PAGE_MASK, %rdi
movq %rdi, %rax
shrq $PUD_SHIFT, %rax
andq $(PTRS_PER_PUD - 1), %rax
jz ident_complete
leaq (level2_spare_pgt - __START_KERNEL_map + _KERNPG_TABLE)(%rbp), %rdx
leaq level3_ident_pgt(%rip), %rbx
movq %rdx, 0(%rbx, %rax, 8)
movq %rdi, %rax
shrq $PMD_SHIFT, %rax
andq $(PTRS_PER_PMD - 1), %rax
leaq __PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx
leaq level2_spare_pgt(%rip), %rbx
movq %rdx, 0(%rbx, %rax, 8)
ident_complete:
/*
* Fixup the kernel text+data virtual addresses. Note that
* we might write invalid pmds, when the kernel is relocated
* cleanup_highmap() fixes this up along with the mappings
* beyond _end.
*/
leaq level2_kernel_pgt(%rip), %rdi
leaq 4096(%rdi), %r8
/* See if it is a valid page table entry */
1: testq $1, 0(%rdi)
jz 2f
addq %rbp, 0(%rdi)
/* Go to the next page */
2: addq $8, %rdi
cmp %r8, %rdi
jne 1b
/* Fixup phys_base */
addq %rbp, phys_base(%rip)
#ifdef CONFIG_SMP
addq %rbp, trampoline_level4_pgt + 0(%rip)
addq %rbp, trampoline_level4_pgt + (511*8)(%rip)
#endif
#ifdef CONFIG_ACPI_SLEEP
addq %rbp, wakeup_level4_pgt + 0(%rip)
addq %rbp, wakeup_level4_pgt + (511*8)(%rip)
#endif
/* Due to ENTRY(), sometimes the empty space gets filled with
* zeros. Better take a jmp than relying on empty space being
* filled with 0x90 (nop)
*/
jmp secondary_startup_64
ENTRY(secondary_startup_64)
/*
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
* and someone has loaded a mapped page table.
*
* %esi holds a physical pointer to real_mode_data.
*
* We come here either from startup_64 (using physical addresses)
* or from trampoline.S (using virtual addresses).
*
* Using virtual addresses from trampoline.S removes the need
* to have any identity mapped pages in the kernel page table
* after the boot processor executes this code.
*/
/* Enable PAE mode and PGE */
xorq %rax, %rax
btsq $5, %rax
btsq $7, %rax
movq %rax, %cr4
/* Setup early boot stage 4 level pagetables. */
movq $(init_level4_pgt - __START_KERNEL_map), %rax
addq phys_base(%rip), %rax
movq %rax, %cr3
/* Ensure I am executing from virtual addresses */
movq $1f, %rax
jmp *%rax
1:
/* Check if nx is implemented */
movl $0x80000001, %eax
cpuid
movl %edx,%edi
/* Setup EFER (Extended Feature Enable Register) */
movl $MSR_EFER, %ecx
rdmsr
btsl $_EFER_SCE, %eax /* Enable System Call */
btl $20,%edi /* No Execute supported? */
jnc 1f
btsl $_EFER_NX, %eax
1: wrmsr /* Make changes effective */
/* Setup cr0 */
#define CR0_PM 1 /* protected mode */
#define CR0_MP (1<<1)
#define CR0_ET (1<<4)
#define CR0_NE (1<<5)
#define CR0_WP (1<<16)
#define CR0_AM (1<<18)
#define CR0_PAGING (1<<31)
movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
/* Make changes effective */
movq %rax, %cr0
/* Setup a boot time stack */
movq init_rsp(%rip),%rsp
/* zero EFLAGS after setting rsp */
pushq $0
popfq
/*
* We must switch to a new descriptor in kernel space for the GDT
* because soon the kernel won't have access anymore to the userspace
* addresses where we're currently running on. We have to do that here
* because in 32bit we couldn't load a 64bit linear address.
*/
lgdt cpu_gdt_descr(%rip)
/* set up data segments. actually 0 would do too */
movl $__KERNEL_DS,%eax
movl %eax,%ds
movl %eax,%ss
movl %eax,%es
/*
* We don't really need to load %fs or %gs, but load them anyway
* to kill any stale realmode selectors. This allows execution
* under VT hardware.
*/
movl %eax,%fs
movl %eax,%gs
/*
* Setup up a dummy PDA. this is just for some early bootup code
* that does in_interrupt()
*/
movl $MSR_GS_BASE,%ecx
movq $empty_zero_page,%rax
movq %rax,%rdx
shrq $32,%rdx
wrmsr
/* esi is pointer to real mode structure with interesting info.
pass it to C */
movl %esi, %edi
/* Finally jump to run C code and to be on real kernel address
* Since we are running on identity-mapped space we have to jump
* to the full 64bit address, this is only possible as indirect
* jump. In addition we need to ensure %cs is set so we make this
* a far return.
*/
movq initial_code(%rip),%rax
pushq $0 # fake return address to stop unwinder
pushq $__KERNEL_CS # set correct cs
pushq %rax # target address in negative space
lretq
/* SMP bootup changes these two */
__CPUINITDATA
.align 8
ENTRY(initial_code)
.quad x86_64_start_kernel
__FINITDATA
ENTRY(init_rsp)
.quad init_thread_union+THREAD_SIZE-8
bad_address:
jmp bad_address
#ifdef CONFIG_EARLY_PRINTK
.macro early_idt_tramp first, last
.ifgt \last-\first
early_idt_tramp \first, \last-1
.endif
movl $\last,%esi
jmp early_idt_handler
.endm
.globl early_idt_handlers
early_idt_handlers:
early_idt_tramp 0, 63
early_idt_tramp 64, 127
early_idt_tramp 128, 191
early_idt_tramp 192, 255
#endif
ENTRY(early_idt_handler)
#ifdef CONFIG_EARLY_PRINTK
cmpl $2,early_recursion_flag(%rip)
jz 1f
incl early_recursion_flag(%rip)
GET_CR2_INTO_RCX
movq %rcx,%r9
xorl %r8d,%r8d # zero for error code
movl %esi,%ecx # get vector number
# Test %ecx against mask of vectors that push error code.
cmpl $31,%ecx
ja 0f
movl $1,%eax
salq %cl,%rax
testl $0x27d00,%eax
je 0f
popq %r8 # get error code
0: movq 0(%rsp),%rcx # get ip
movq 8(%rsp),%rdx # get cs
xorl %eax,%eax
leaq early_idt_msg(%rip),%rdi
call early_printk
cmpl $2,early_recursion_flag(%rip)
jz 1f
call dump_stack
#ifdef CONFIG_KALLSYMS
leaq early_idt_ripmsg(%rip),%rdi
movq 8(%rsp),%rsi # get rip again
call __print_symbol
#endif
#endif /* EARLY_PRINTK */
1: hlt
jmp 1b
#ifdef CONFIG_EARLY_PRINTK
early_recursion_flag:
.long 0
early_idt_msg:
.asciz "PANIC: early exception %02lx rip %lx:%lx error %lx cr2 %lx\n"
early_idt_ripmsg:
.asciz "RIP %s\n"
#endif /* CONFIG_EARLY_PRINTK */
.balign PAGE_SIZE
#define NEXT_PAGE(name) \
.balign PAGE_SIZE; \
ENTRY(name)
/* Automate the creation of 1 to 1 mapping pmd entries */
#define PMDS(START, PERM, COUNT) \
i = 0 ; \
.rept (COUNT) ; \
.quad (START) + (i << 21) + (PERM) ; \
i = i + 1 ; \
.endr
/*
* This default setting generates an ident mapping at address 0x100000
* and a mapping for the kernel that precisely maps virtual address
* 0xffffffff80000000 to physical address 0x000000. (always using
* 2Mbyte large pages provided by PAE mode)
*/
NEXT_PAGE(init_level4_pgt)
.quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
.fill 257,8,0
.quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
.fill 252,8,0
/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
.quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
NEXT_PAGE(level3_ident_pgt)
.quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
.fill 511,8,0
NEXT_PAGE(level3_kernel_pgt)
.fill 510,8,0
/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
.quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
.quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
NEXT_PAGE(level2_fixmap_pgt)
.fill 506,8,0
.quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
/* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */
.fill 5,8,0
NEXT_PAGE(level1_fixmap_pgt)
.fill 512,8,0
NEXT_PAGE(level2_ident_pgt)
/* Since I easily can, map the first 1G.
* Don't set NX because code runs from these pages.
*/
PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
NEXT_PAGE(level2_kernel_pgt)
/* 40MB kernel mapping. The kernel code cannot be bigger than that.
When you change this change KERNEL_TEXT_SIZE in page.h too. */
/* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE)
/* Module mapping starts here */
.fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
NEXT_PAGE(level2_spare_pgt)
.fill 512,8,0
#undef PMDS
#undef NEXT_PAGE
.data
.align 16
.globl cpu_gdt_descr
cpu_gdt_descr:
.word gdt_end-cpu_gdt_table-1
gdt:
.quad cpu_gdt_table
#ifdef CONFIG_SMP
.rept NR_CPUS-1
.word 0
.quad 0
.endr
#endif
ENTRY(phys_base)
/* This must match the first entry in level2_kernel_pgt */
.quad 0x0000000000000000
/* We need valid kernel segments for data and code in long mode too
* IRET will check the segment types kkeil 2000/10/28
* Also sysret mandates a special GDT layout
*/
.section .data.page_aligned, "aw"
.align PAGE_SIZE
/* The TLS descriptors are currently at a different place compared to i386.
Hopefully nobody expects them at a fixed place (Wine?) */
ENTRY(cpu_gdt_table)
.quad 0x0000000000000000 /* NULL descriptor */
.quad 0x00cf9b000000ffff /* __KERNEL32_CS */
.quad 0x00af9b000000ffff /* __KERNEL_CS */
.quad 0x00cf93000000ffff /* __KERNEL_DS */
.quad 0x00cffb000000ffff /* __USER32_CS */
.quad 0x00cff3000000ffff /* __USER_DS, __USER32_DS */
.quad 0x00affb000000ffff /* __USER_CS */
.quad 0x0 /* unused */
.quad 0,0 /* TSS */
.quad 0,0 /* LDT */
.quad 0,0,0 /* three TLS descriptors */
.quad 0x0000f40000000000 /* node/CPU stored in limit */
gdt_end:
/* asm/segment.h:GDT_ENTRIES must match this */
/* This should be a multiple of the cache line size */
/* GDTs of other CPUs are now dynamically allocated */
/* zero the remaining page */
.fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0
.section .bss, "aw", @nobits
.align L1_CACHE_BYTES
ENTRY(idt_table)
.skip 256 * 16
.section .bss.page_aligned, "aw", @nobits
.align PAGE_SIZE
ENTRY(empty_zero_page)
.skip PAGE_SIZE