Cosmin Tanislav 11dadb6310 iio: accel: adxl367: fix I2C FIFO data register ... As specified in the datasheet, the I2C FIFO data register is 0x18, not 0x42. 0x42 was used by mistake when adapting the ADXL372 driver. Fix this mistake. Fixes: cbab791c5e ("iio: accel: add ADXL367 driver") Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240207033657.206171-2-demonsingur@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2024-02-25 14:31:14 +00:00
..
accel	iio: accel: adxl367: fix I2C FIFO data register	2024-02-25 14:31:14 +00:00
adc	iio: adc: ad4130: only set GPIO_CTRL if pin is unused	2024-02-10 16:52:39 +00:00
addac
afe
amplifiers
buffer
cdc
chemical
common
dac
dummy
filter
frequency
gyro
health
humidity	iio: humidity: hdc3020: fix temperature offset	2024-01-27 14:40:07 +00:00
imu	iio: imu: inv_mpu6050: fix frequency setting when chip is off	2024-02-25 11:42:12 +00:00
light	iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP	2024-02-04 14:02:16 +00:00
magnetometer	iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC	2024-01-22 18:59:06 +00:00
multiplexer
orientation
position
potentiometer
potentiostat
pressure	iio: pressure: dlhl60d: Initialize empty DLH bytes	2024-02-25 12:11:31 +00:00
proximity
resolver
temperature
test
trigger
iio_core.h
iio_core_trigger.h
industrialio-buffer.c
industrialio-configfs.c
industrialio-core.c
industrialio-event.c
industrialio-gts-helper.c
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c
industrialio-triggered-event.c
inkern.c
Kconfig
Makefile
TODO