linux/arch/arm/mach-sa1100/include/mach/collie.h
Eric Miao efe7f8bda0 [ARM] sa1100: remove unreferenced IRQ definitions
These IRQ definitions related to LOCOMO are never referenced anywhere,
thus could be safely removed.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:49 +08:00

93 lines
3.3 KiB
C

/*
* arch/arm/mach-sa1100/include/mach/collie.h
*
* This file contains the hardware specific definitions for Assabet
* Only include this file from SA1100-specific files.
*
* ChangeLog:
* 04-06-2001 Lineo Japan, Inc.
* 04-16-2001 SHARP Corporation
* 07-07-2002 Chris Larson <clarson@digi.com>
*
*/
#ifndef __ASM_ARCH_COLLIE_H
#define __ASM_ARCH_COLLIE_H
#define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1)
#define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE + 0)
#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12
#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13
#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14
#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15
#define COLLIE_SCP_5VON SCOOP_GPCR_PA16
#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17
#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7)
#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
#define COLLIE_SCOOP_IO_DIR (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
COLLIE_SCP_LB_VOL_CHG)
#define COLLIE_SCOOP_IO_OUT (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
/* GPIOs for gpiolib */
#define COLLIE_GPIO_ON_KEY (0)
#define COLLIE_GPIO_AC_IN (1)
#define COLLIE_GPIO_SDIO_INT (11)
#define COLLIE_GPIO_CF_IRQ (14)
#define COLLIE_GPIO_nREMOCON_INT (15)
#define COLLIE_GPIO_UCB1x00_RESET (16)
#define COLLIE_GPIO_nMIC_ON (17)
#define COLLIE_GPIO_nREMOCON_ON (18)
#define COLLIE_GPIO_CO (20)
#define COLLIE_GPIO_MCP_CLK (21)
#define COLLIE_GPIO_CF_CD (22)
#define COLLIE_GPIO_UCB1x00_IRQ (23)
#define COLLIE_GPIO_WAKEUP (24)
#define COLLIE_GPIO_GA_INT (25)
#define COLLIE_GPIO_MAIN_BAT_LOW (26)
/* GPIO definitions for direct register access */
#define _COLLIE_GPIO_ON_KEY GPIO_GPIO(0)
#define _COLLIE_GPIO_AC_IN GPIO_GPIO(1)
#define _COLLIE_GPIO_nREMOCON_INT GPIO_GPIO(15)
#define _COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO(16)
#define _COLLIE_GPIO_nMIC_ON GPIO_GPIO(17)
#define _COLLIE_GPIO_nREMOCON_ON GPIO_GPIO(18)
#define _COLLIE_GPIO_CO GPIO_GPIO(20)
#define _COLLIE_GPIO_WAKEUP GPIO_GPIO(24)
/* Interrupts */
#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
#define COLLIE_IRQ_GPIO_CF_CD IRQ_GPIO22
#define COLLIE_IRQ_GPIO_UCB1x00_IRQ IRQ_GPIO23
#define COLLIE_IRQ_GPIO_WAKEUP IRQ_GPIO24
#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25
#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26
/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
#define COLLIE_TC35143_GPIO_BASE (GPIO_MAX + 13)
#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0
#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1
#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2
#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3
#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4
#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5
#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5
#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
#define COLLIE_GPIO_MBAT_ON (COLLIE_TC35143_GPIO_BASE + 7)
#define COLLIE_GPIO_BBAT_ON (COLLIE_TC35143_GPIO_BASE + 8)
#define COLLIE_GPIO_TMP_ON (COLLIE_TC35143_GPIO_BASE + 9)
#define COLLIE_TC35143_GPIO_IN (UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
#define COLLIE_TC35143_GPIO_OUT (UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
| UCB_IO_6)
#endif