linux/arch/arm/mach-omap1/i2c.c
Tony Lindgren 01480bad0a ARM: OMAP: Fix relative includes for shared i2c.h file
As discussed on linux-arm-kernel, we want to avoid
relative includes for the arch/arm/*omap* shared code:

http://www.spinics.net/lists/linux-omap/msg80520.html

To fix this for the shared i2c.h, let's re-introduce
a minimal plat/i2c.h.

Note that drivers must not use this header as it will
break build for omap2+ CONFIG_MULTIPLATFORM builds.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-31 15:37:13 -07:00

94 lines
2.3 KiB
C

/*
* Helper module for board specific I2C bus registration
*
* Copyright (C) 2009 Nokia Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/i2c-omap.h>
#include <mach/mux.h>
#include "soc.h"
#include <plat/i2c.h>
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
#define OMAP1_INT_I2C (32 + 4)
static const char name[] = "omap_i2c";
static struct resource i2c_resources[2] = {
};
static struct platform_device omap_i2c_devices[1] = {
};
static void __init omap1_i2c_mux_pins(int bus_id)
{
if (cpu_is_omap7xx()) {
omap_cfg_reg(I2C_7XX_SDA);
omap_cfg_reg(I2C_7XX_SCL);
} else {
omap_cfg_reg(I2C_SDA);
omap_cfg_reg(I2C_SCL);
}
}
int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
int bus_id)
{
struct platform_device *pdev;
struct resource *res;
if (bus_id > 1)
return -EINVAL;
omap1_i2c_mux_pins(bus_id);
pdev = &omap_i2c_devices[bus_id - 1];
pdev->id = bus_id;
pdev->name = name;
pdev->num_resources = ARRAY_SIZE(i2c_resources);
res = i2c_resources;
res[0].start = OMAP1_I2C_BASE;
res[0].end = res[0].start + OMAP_I2C_SIZE;
res[0].flags = IORESOURCE_MEM;
res[1].start = OMAP1_INT_I2C;
res[1].flags = IORESOURCE_IRQ;
pdev->resource = res;
/* all OMAP1 have IP version 1 register set */
pdata->rev = OMAP_I2C_IP_VERSION_1;
/* all OMAP1 I2C are implemented like this */
pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
OMAP_I2C_FLAG_SIMPLE_CLOCK |
OMAP_I2C_FLAG_16BIT_DATA_REG |
OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
/* how the cpu bus is wired up differs for 7xx only */
if (cpu_is_omap7xx())
pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
else
pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
pdev->dev.platform_data = pdata;
return platform_device_register(pdev);
}