linux/arch/arm/boot/dts/spear320-evb.dts
Viresh Kumar 067bf748bd mmc: sdhci-spear: add device tree bindings
This adds simple DT bindings for SDHCI SPEAr controller. It uses cd-gpios
from common mmc bindings.

This also fixes spear300-evb.dts with correct name for card detect binding.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07 17:41:44 -04:00

197 lines
3.2 KiB
Plaintext

/*
* DTS file for SPEAr320 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "spear320.dtsi"
/ {
model = "ST SPEAr320 Evaluation Board";
compatible = "st,spear320-evb", "st,spear320";
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0 0x40000000>;
};
ahb {
pinmux@b3000000 {
st,pinmux-mode = <4>;
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
i2c0 {
st,pins = "i2c0_grp";
st,function = "i2c0";
};
mii0 {
st,pins = "mii0_grp";
st,function = "mii0";
};
ssp0 {
st,pins = "ssp0_grp";
st,function = "ssp0";
};
uart0 {
st,pins = "uart0_grp";
st,function = "uart0";
};
sdhci {
st,pins = "sdhci_cd_51_grp";
st,function = "sdhci";
};
i2s {
st,pins = "i2s_grp";
st,function = "i2s";
};
uart1 {
st,pins = "uart1_grp";
st,function = "uart1";
};
uart2 {
st,pins = "uart2_grp";
st,function = "uart2";
};
can0 {
st,pins = "can0_grp";
st,function = "can0";
};
can1 {
st,pins = "can1_grp";
st,function = "can1";
};
mii2 {
st,pins = "mii2_grp";
st,function = "mii2";
};
pwm0_1 {
st,pins = "pwm0_1_pin_14_15_grp";
st,function = "pwm0_1";
};
pwm2 {
st,pins = "pwm2_pin_13_grp";
st,function = "pwm2";
};
};
};
clcd@90000000 {
status = "okay";
};
dma@fc400000 {
status = "okay";
};
fsmc: flash@4c000000 {
status = "okay";
};
gmac: eth@e0800000 {
status = "okay";
};
sdhci@70000000 {
status = "okay";
};
smi: flash@fc000000 {
status = "okay";
clock-rate=<50000000>;
flash@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xf8000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x40000>;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x2c0000>;
};
partition@310000 {
label = "rootfs";
reg = <0x310000 0x4f0000>;
};
};
};
spi0: spi@d0100000 {
status = "okay";
};
spi1: spi@a5000000 {
status = "okay";
};
spi2: spi@a6000000 {
status = "okay";
};
ehci@e1800000 {
status = "okay";
};
ohci@e1900000 {
status = "okay";
};
ohci@e2100000 {
status = "okay";
};
apb {
gpio0: gpio@fc980000 {
status = "okay";
};
i2c0: i2c@d0180000 {
status = "okay";
};
i2c1: i2c@a7000000 {
status = "okay";
};
rtc@fc900000 {
status = "okay";
};
serial@d0000000 {
status = "okay";
};
serial@a3000000 {
status = "okay";
};
serial@a4000000 {
status = "okay";
};
wdt@fc880000 {
status = "okay";
};
};
};
};