linux/arch/arm/mach-s5pv210/pm.c
Jongpill Lee ea31fd4330 ARM: S5PV210: Add Power Management Support
This patch adds suspend-to-ram support for S5PV210.
Note. This patch is confirmed on SMDKV210 and SMDKC110 board.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21 07:54:57 +09:00

167 lines
3.8 KiB
C

/* linux/arch/arm/mach-s5pv210/pm.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV210 - Power Management support
*
* Based on arch/arm/mach-s3c2410/pm.c
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/regs-timer.h>
#include <mach/regs-irq.h>
#include <mach/regs-clock.h>
static struct sleep_save s5pv210_core_save[] = {
/* Clock source */
SAVE_ITEM(S5P_CLK_SRC0),
SAVE_ITEM(S5P_CLK_SRC1),
SAVE_ITEM(S5P_CLK_SRC2),
SAVE_ITEM(S5P_CLK_SRC3),
SAVE_ITEM(S5P_CLK_SRC4),
SAVE_ITEM(S5P_CLK_SRC5),
SAVE_ITEM(S5P_CLK_SRC6),
/* Clock source Mask */
SAVE_ITEM(S5P_CLK_SRC_MASK0),
SAVE_ITEM(S5P_CLK_SRC_MASK1),
/* Clock Divider */
SAVE_ITEM(S5P_CLK_DIV0),
SAVE_ITEM(S5P_CLK_DIV1),
SAVE_ITEM(S5P_CLK_DIV2),
SAVE_ITEM(S5P_CLK_DIV3),
SAVE_ITEM(S5P_CLK_DIV4),
SAVE_ITEM(S5P_CLK_DIV5),
SAVE_ITEM(S5P_CLK_DIV6),
SAVE_ITEM(S5P_CLK_DIV7),
/* Clock Main Gate */
SAVE_ITEM(S5P_CLKGATE_MAIN0),
SAVE_ITEM(S5P_CLKGATE_MAIN1),
SAVE_ITEM(S5P_CLKGATE_MAIN2),
/* Clock source Peri Gate */
SAVE_ITEM(S5P_CLKGATE_PERI0),
SAVE_ITEM(S5P_CLKGATE_PERI1),
/* Clock source SCLK Gate */
SAVE_ITEM(S5P_CLKGATE_SCLK0),
SAVE_ITEM(S5P_CLKGATE_SCLK1),
/* Clock IP Clock gate */
SAVE_ITEM(S5P_CLKGATE_IP0),
SAVE_ITEM(S5P_CLKGATE_IP1),
SAVE_ITEM(S5P_CLKGATE_IP2),
SAVE_ITEM(S5P_CLKGATE_IP3),
SAVE_ITEM(S5P_CLKGATE_IP4),
/* Clock Blcok and Bus gate */
SAVE_ITEM(S5P_CLKGATE_BLOCK),
SAVE_ITEM(S5P_CLKGATE_BUS0),
/* Clock ETC */
SAVE_ITEM(S5P_CLK_OUT),
SAVE_ITEM(S5P_MDNIE_SEL),
/* PWM Register */
SAVE_ITEM(S3C2410_TCFG0),
SAVE_ITEM(S3C2410_TCFG1),
SAVE_ITEM(S3C64XX_TINT_CSTAT),
SAVE_ITEM(S3C2410_TCON),
SAVE_ITEM(S3C2410_TCNTB(0)),
SAVE_ITEM(S3C2410_TCMPB(0)),
SAVE_ITEM(S3C2410_TCNTO(0)),
};
void s5pv210_cpu_suspend(void)
{
unsigned long tmp;
/* issue the standby signal into the pm unit. Note, we
* issue a write-buffer drain just in case */
tmp = 0;
asm("b 1f\n\t"
".align 5\n\t"
"1:\n\t"
"mcr p15, 0, %0, c7, c10, 5\n\t"
"mcr p15, 0, %0, c7, c10, 4\n\t"
"wfi" : : "r" (tmp));
/* we should never get past here */
panic("sleep resumed to originator?");
}
static void s5pv210_pm_prepare(void)
{
unsigned int tmp;
/* ensure at least INFORM0 has the resume address */
__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
tmp = __raw_readl(S5P_SLEEP_CFG);
tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN);
__raw_writel(tmp, S5P_SLEEP_CFG);
/* WFI for SLEEP mode configuration by SYSCON */
tmp = __raw_readl(S5P_PWR_CFG);
tmp &= S5P_CFG_WFI_CLEAN;
tmp |= S5P_CFG_WFI_SLEEP;
__raw_writel(tmp, S5P_PWR_CFG);
/* SYSCON interrupt handling disable */
tmp = __raw_readl(S5P_OTHERS);
tmp |= S5P_OTHER_SYSC_INTOFF;
__raw_writel(tmp, S5P_OTHERS);
s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
}
static int s5pv210_pm_add(struct sys_device *sysdev)
{
pm_cpu_prep = s5pv210_pm_prepare;
pm_cpu_sleep = s5pv210_cpu_suspend;
return 0;
}
static int s5pv210_pm_resume(struct sys_device *dev)
{
u32 tmp;
tmp = __raw_readl(S5P_OTHERS);
tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\
S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART);
__raw_writel(tmp , S5P_OTHERS);
s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
return 0;
}
static struct sysdev_driver s5pv210_pm_driver = {
.add = s5pv210_pm_add,
.resume = s5pv210_pm_resume,
};
static __init int s5pv210_pm_drvinit(void)
{
return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
}
arch_initcall(s5pv210_pm_drvinit);