linux/drivers/scsi/a3000.c
Mike Rapoport e31cf2f4ca mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include <linux/mm.h>") ; do
		sed -i -e '/include <asm\/pgtable.h>/ d' $f
	done

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00

269 lines
6.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <asm/page.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
#include "scsi.h"
#include "wd33c93.h"
#include "a3000.h"
struct a3000_hostdata {
struct WD33C93_hostdata wh;
struct a3000_scsiregs *regs;
};
static irqreturn_t a3000_intr(int irq, void *data)
{
struct Scsi_Host *instance = data;
struct a3000_hostdata *hdata = shost_priv(instance);
unsigned int status = hdata->regs->ISTR;
unsigned long flags;
if (!(status & ISTR_INT_P))
return IRQ_NONE;
if (status & ISTR_INTS) {
spin_lock_irqsave(instance->host_lock, flags);
wd33c93_intr(instance);
spin_unlock_irqrestore(instance->host_lock, flags);
return IRQ_HANDLED;
}
pr_warn("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
return IRQ_NONE;
}
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
struct Scsi_Host *instance = cmd->device->host;
struct a3000_hostdata *hdata = shost_priv(instance);
struct WD33C93_hostdata *wh = &hdata->wh;
struct a3000_scsiregs *regs = hdata->regs;
unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
/*
* if the physical address has the wrong alignment, or if
* physical address is bad, or if it is a write and at the
* end of a physical memory chunk, then allocate a bounce
* buffer
*/
if (addr & A3000_XFER_MASK) {
wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
GFP_KERNEL);
/* can't allocate memory; use PIO */
if (!wh->dma_bounce_buffer) {
wh->dma_bounce_len = 0;
return 1;
}
if (!dir_in) {
/* copy to bounce buffer for a write */
memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
cmd->SCp.this_residual);
}
addr = virt_to_bus(wh->dma_bounce_buffer);
}
/* setup dma direction */
if (!dir_in)
cntr |= CNTR_DDIR;
/* remember direction */
wh->dma_dir = dir_in;
regs->CNTR = cntr;
/* setup DMA *physical* address */
regs->ACR = addr;
if (dir_in) {
/* invalidate any cache */
cache_clear(addr, cmd->SCp.this_residual);
} else {
/* push any dirty cache */
cache_push(addr, cmd->SCp.this_residual);
}
/* start DMA */
mb(); /* make sure setup is completed */
regs->ST_DMA = 1;
mb(); /* make sure DMA has started before next IO */
/* return success */
return 0;
}
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
struct a3000_hostdata *hdata = shost_priv(instance);
struct WD33C93_hostdata *wh = &hdata->wh;
struct a3000_scsiregs *regs = hdata->regs;
/* disable SCSI interrupts */
unsigned short cntr = CNTR_PDMD;
if (!wh->dma_dir)
cntr |= CNTR_DDIR;
regs->CNTR = cntr;
mb(); /* make sure CNTR is updated before next IO */
/* flush if we were reading */
if (wh->dma_dir) {
regs->FLUSH = 1;
mb(); /* don't allow prefetch */
while (!(regs->ISTR & ISTR_FE_FLG))
barrier();
mb(); /* no IO until FLUSH is done */
}
/* clear a possible interrupt */
/* I think that this CINT is only necessary if you are
* using the terminal count features. HM 7 Mar 1994
*/
regs->CINT = 1;
/* stop DMA */
regs->SP_DMA = 1;
mb(); /* make sure DMA is stopped before next IO */
/* restore the CONTROL bits (minus the direction flag) */
regs->CNTR = CNTR_PDMD | CNTR_INTEN;
mb(); /* make sure CNTR is updated before next IO */
/* copy from a bounce buffer, if necessary */
if (status && wh->dma_bounce_buffer) {
if (SCpnt) {
if (wh->dma_dir && SCpnt)
memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
SCpnt->SCp.this_residual);
kfree(wh->dma_bounce_buffer);
wh->dma_bounce_buffer = NULL;
wh->dma_bounce_len = 0;
} else {
kfree(wh->dma_bounce_buffer);
wh->dma_bounce_buffer = NULL;
wh->dma_bounce_len = 0;
}
}
}
static struct scsi_host_template amiga_a3000_scsi_template = {
.module = THIS_MODULE,
.name = "Amiga 3000 built-in SCSI",
.show_info = wd33c93_show_info,
.write_info = wd33c93_write_info,
.proc_name = "A3000",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_host_reset_handler = wd33c93_host_reset,
.can_queue = CAN_QUEUE,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = CMD_PER_LUN,
};
static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
{
struct resource *res;
struct Scsi_Host *instance;
int error;
struct a3000_scsiregs *regs;
wd33c93_regs wdregs;
struct a3000_hostdata *hdata;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
if (!request_mem_region(res->start, resource_size(res), "wd33c93"))
return -EBUSY;
instance = scsi_host_alloc(&amiga_a3000_scsi_template,
sizeof(struct a3000_hostdata));
if (!instance) {
error = -ENOMEM;
goto fail_alloc;
}
instance->irq = IRQ_AMIGA_PORTS;
regs = ZTWO_VADDR(res->start);
regs->DAWR = DAWR_A3000;
wdregs.SASR = &regs->SASR;
wdregs.SCMD = &regs->SCMD;
hdata = shost_priv(instance);
hdata->wh.no_sync = 0xff;
hdata->wh.fast = 0;
hdata->wh.dma_mode = CTRL_DMA;
hdata->regs = regs;
wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_12_15);
error = request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED,
"A3000 SCSI", instance);
if (error)
goto fail_irq;
regs->CNTR = CNTR_PDMD | CNTR_INTEN;
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
platform_set_drvdata(pdev, instance);
scsi_scan_host(instance);
return 0;
fail_host:
free_irq(IRQ_AMIGA_PORTS, instance);
fail_irq:
scsi_host_put(instance);
fail_alloc:
release_mem_region(res->start, resource_size(res));
return error;
}
static int __exit amiga_a3000_scsi_remove(struct platform_device *pdev)
{
struct Scsi_Host *instance = platform_get_drvdata(pdev);
struct a3000_hostdata *hdata = shost_priv(instance);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hdata->regs->CNTR = 0;
scsi_remove_host(instance);
free_irq(IRQ_AMIGA_PORTS, instance);
scsi_host_put(instance);
release_mem_region(res->start, resource_size(res));
return 0;
}
static struct platform_driver amiga_a3000_scsi_driver = {
.remove = __exit_p(amiga_a3000_scsi_remove),
.driver = {
.name = "amiga-a3000-scsi",
},
};
module_platform_driver_probe(amiga_a3000_scsi_driver, amiga_a3000_scsi_probe);
MODULE_DESCRIPTION("Amiga 3000 built-in SCSI");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:amiga-a3000-scsi");