mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
6b50df2b8c
It is possible that 'data' passed to kfree() is set to a error value
instead of allocated space. Make sure it doesn't get called with invalid
pointer.
Fixes: 5a6338cce9
("mailbox: arm_mhuv2: Add driver")
Cc: v5.11 <stable@vger.kernel.org> # v5.11
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
1136 lines
29 KiB
C
1136 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ARM Message Handling Unit Version 2 (MHUv2) driver.
|
|
*
|
|
* Copyright (C) 2020 ARM Ltd.
|
|
* Copyright (C) 2020 Linaro Ltd.
|
|
*
|
|
* An MHUv2 mailbox controller can provide up to 124 channel windows (each 32
|
|
* bit long) and the driver allows any combination of both the transport
|
|
* protocol modes: data-transfer and doorbell, to be used on those channel
|
|
* windows.
|
|
*
|
|
* The transport protocols should be specified in the device tree entry for the
|
|
* device. The transport protocols determine how the underlying hardware
|
|
* resources of the device are utilized when transmitting data. Refer to the
|
|
* device tree bindings of the ARM MHUv2 controller for more details.
|
|
*
|
|
* The number of registered mailbox channels is dependent on both the underlying
|
|
* hardware - mainly the number of channel windows implemented by the platform,
|
|
* as well as the selected transport protocols.
|
|
*
|
|
* The MHUv2 controller can work both as a sender and receiver, but the driver
|
|
* and the DT bindings support unidirectional transfers for better allocation of
|
|
* the channels. That is, this driver will be probed for two separate devices
|
|
* for each mailbox controller, a sender device and a receiver device.
|
|
*/
|
|
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mailbox_controller.h>
|
|
#include <linux/mailbox/arm_mhuv2_message.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
/* ====== MHUv2 Registers ====== */
|
|
|
|
/* Maximum number of channel windows */
|
|
#define MHUV2_CH_WN_MAX 124
|
|
/* Number of combined interrupt status registers */
|
|
#define MHUV2_CMB_INT_ST_REG_CNT 4
|
|
#define MHUV2_STAT_BYTES (sizeof(u32))
|
|
#define MHUV2_STAT_BITS (MHUV2_STAT_BYTES * __CHAR_BIT__)
|
|
|
|
#define LSB_MASK(n) ((1 << (n * __CHAR_BIT__)) - 1)
|
|
#define MHUV2_PROTOCOL_PROP "arm,mhuv2-protocols"
|
|
|
|
/* Register Message Handling Unit Configuration fields */
|
|
struct mhu_cfg_t {
|
|
u32 num_ch : 7;
|
|
u32 pad : 25;
|
|
} __packed;
|
|
|
|
/* register Interrupt Status fields */
|
|
struct int_st_t {
|
|
u32 nr2r : 1;
|
|
u32 r2nr : 1;
|
|
u32 pad : 30;
|
|
} __packed;
|
|
|
|
/* Register Interrupt Clear fields */
|
|
struct int_clr_t {
|
|
u32 nr2r : 1;
|
|
u32 r2nr : 1;
|
|
u32 pad : 30;
|
|
} __packed;
|
|
|
|
/* Register Interrupt Enable fields */
|
|
struct int_en_t {
|
|
u32 r2nr : 1;
|
|
u32 nr2r : 1;
|
|
u32 chcomb : 1;
|
|
u32 pad : 29;
|
|
} __packed;
|
|
|
|
/* Register Implementer Identification fields */
|
|
struct iidr_t {
|
|
u32 implementer : 12;
|
|
u32 revision : 4;
|
|
u32 variant : 4;
|
|
u32 product_id : 12;
|
|
} __packed;
|
|
|
|
/* Register Architecture Identification Register fields */
|
|
struct aidr_t {
|
|
u32 arch_minor_rev : 4;
|
|
u32 arch_major_rev : 4;
|
|
u32 pad : 24;
|
|
} __packed;
|
|
|
|
/* Sender Channel Window fields */
|
|
struct mhu2_send_ch_wn_reg {
|
|
u32 stat;
|
|
u8 pad1[0x0C - 0x04];
|
|
u32 stat_set;
|
|
u32 int_st;
|
|
u32 int_clr;
|
|
u32 int_en;
|
|
u8 pad2[0x20 - 0x1C];
|
|
} __packed;
|
|
|
|
/* Sender frame register fields */
|
|
struct mhu2_send_frame_reg {
|
|
struct mhu2_send_ch_wn_reg ch_wn[MHUV2_CH_WN_MAX];
|
|
struct mhu_cfg_t mhu_cfg;
|
|
u32 resp_cfg;
|
|
u32 access_request;
|
|
u32 access_ready;
|
|
struct int_st_t int_st;
|
|
struct int_clr_t int_clr;
|
|
struct int_en_t int_en;
|
|
u32 reserved0;
|
|
u32 chcomb_int_st[MHUV2_CMB_INT_ST_REG_CNT];
|
|
u8 pad[0xFC8 - 0xFB0];
|
|
struct iidr_t iidr;
|
|
struct aidr_t aidr;
|
|
} __packed;
|
|
|
|
/* Receiver Channel Window fields */
|
|
struct mhu2_recv_ch_wn_reg {
|
|
u32 stat;
|
|
u32 stat_masked;
|
|
u32 stat_clear;
|
|
u8 reserved0[0x10 - 0x0C];
|
|
u32 mask;
|
|
u32 mask_set;
|
|
u32 mask_clear;
|
|
u8 pad[0x20 - 0x1C];
|
|
} __packed;
|
|
|
|
/* Receiver frame register fields */
|
|
struct mhu2_recv_frame_reg {
|
|
struct mhu2_recv_ch_wn_reg ch_wn[MHUV2_CH_WN_MAX];
|
|
struct mhu_cfg_t mhu_cfg;
|
|
u8 reserved0[0xF90 - 0xF84];
|
|
struct int_st_t int_st;
|
|
struct int_clr_t int_clr;
|
|
struct int_en_t int_en;
|
|
u32 pad;
|
|
u32 chcomb_int_st[MHUV2_CMB_INT_ST_REG_CNT];
|
|
u8 reserved2[0xFC8 - 0xFB0];
|
|
struct iidr_t iidr;
|
|
struct aidr_t aidr;
|
|
} __packed;
|
|
|
|
|
|
/* ====== MHUv2 data structures ====== */
|
|
|
|
enum mhuv2_transport_protocol {
|
|
DOORBELL = 0,
|
|
DATA_TRANSFER = 1
|
|
};
|
|
|
|
enum mhuv2_frame {
|
|
RECEIVER_FRAME,
|
|
SENDER_FRAME
|
|
};
|
|
|
|
/**
|
|
* struct mhuv2 - MHUv2 mailbox controller data
|
|
*
|
|
* @mbox: Mailbox controller belonging to the MHU frame.
|
|
* @send/recv: Base address of the register mapping region.
|
|
* @frame: Frame type: RECEIVER_FRAME or SENDER_FRAME.
|
|
* @irq: Interrupt.
|
|
* @windows: Channel windows implemented by the platform.
|
|
* @minor: Minor version of the controller.
|
|
* @length: Length of the protocols array in bytes.
|
|
* @protocols: Raw protocol information, derived from device tree.
|
|
* @doorbell_pending_lock: spinlock required for correct operation of Tx
|
|
* interrupt for doorbells.
|
|
*/
|
|
struct mhuv2 {
|
|
struct mbox_controller mbox;
|
|
union {
|
|
struct mhu2_send_frame_reg __iomem *send;
|
|
struct mhu2_recv_frame_reg __iomem *recv;
|
|
};
|
|
enum mhuv2_frame frame;
|
|
unsigned int irq;
|
|
unsigned int windows;
|
|
unsigned int minor;
|
|
unsigned int length;
|
|
u32 *protocols;
|
|
|
|
spinlock_t doorbell_pending_lock;
|
|
};
|
|
|
|
#define mhu_from_mbox(_mbox) container_of(_mbox, struct mhuv2, mbox)
|
|
|
|
/**
|
|
* struct mhuv2_protocol_ops - MHUv2 operations
|
|
*
|
|
* Each transport protocol must provide an implementation of the operations
|
|
* provided here.
|
|
*
|
|
* @rx_startup: Startup callback for receiver.
|
|
* @rx_shutdown: Shutdown callback for receiver.
|
|
* @read_data: Reads and clears newly available data.
|
|
* @tx_startup: Startup callback for receiver.
|
|
* @tx_shutdown: Shutdown callback for receiver.
|
|
* @last_tx_done: Report back if the last tx is completed or not.
|
|
* @send_data: Send data to the receiver.
|
|
*/
|
|
struct mhuv2_protocol_ops {
|
|
int (*rx_startup)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
void (*rx_shutdown)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
void *(*read_data)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
|
|
void (*tx_startup)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
void (*tx_shutdown)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
int (*last_tx_done)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
int (*send_data)(struct mhuv2 *mhu, struct mbox_chan *chan, void *arg);
|
|
};
|
|
|
|
/*
|
|
* MHUv2 mailbox channel's private information
|
|
*
|
|
* @ops: protocol specific ops for the channel.
|
|
* @ch_wn_idx: Channel window index allocated to the channel.
|
|
* @windows: Total number of windows consumed by the channel, only relevant
|
|
* in DATA_TRANSFER protocol.
|
|
* @doorbell: Doorbell bit number within the ch_wn_idx window, only relevant
|
|
* in DOORBELL protocol.
|
|
* @pending: Flag indicating pending doorbell interrupt, only relevant in
|
|
* DOORBELL protocol.
|
|
*/
|
|
struct mhuv2_mbox_chan_priv {
|
|
const struct mhuv2_protocol_ops *ops;
|
|
u32 ch_wn_idx;
|
|
union {
|
|
u32 windows;
|
|
struct {
|
|
u32 doorbell;
|
|
u32 pending;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Macro for reading a bitfield within a physically mapped packed struct */
|
|
#define readl_relaxed_bitfield(_regptr, _type, _field) \
|
|
({ \
|
|
u32 _regval; \
|
|
_regval = readl_relaxed((_regptr)); \
|
|
(*(_type *)(&_regval))._field; \
|
|
})
|
|
|
|
/* Macro for writing a bitfield within a physically mapped packed struct */
|
|
#define writel_relaxed_bitfield(_value, _regptr, _type, _field) \
|
|
({ \
|
|
u32 _regval; \
|
|
_regval = readl_relaxed(_regptr); \
|
|
(*(_type *)(&_regval))._field = _value; \
|
|
writel_relaxed(_regval, _regptr); \
|
|
})
|
|
|
|
|
|
/* =================== Doorbell transport protocol operations =============== */
|
|
|
|
static int mhuv2_doorbell_rx_startup(struct mhuv2 *mhu, struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
writel_relaxed(BIT(priv->doorbell),
|
|
&mhu->recv->ch_wn[priv->ch_wn_idx].mask_clear);
|
|
return 0;
|
|
}
|
|
|
|
static void mhuv2_doorbell_rx_shutdown(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
writel_relaxed(BIT(priv->doorbell),
|
|
&mhu->recv->ch_wn[priv->ch_wn_idx].mask_set);
|
|
}
|
|
|
|
static void *mhuv2_doorbell_read_data(struct mhuv2 *mhu, struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
writel_relaxed(BIT(priv->doorbell),
|
|
&mhu->recv->ch_wn[priv->ch_wn_idx].stat_clear);
|
|
return NULL;
|
|
}
|
|
|
|
static int mhuv2_doorbell_last_tx_done(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
return !(readl_relaxed(&mhu->send->ch_wn[priv->ch_wn_idx].stat) &
|
|
BIT(priv->doorbell));
|
|
}
|
|
|
|
static int mhuv2_doorbell_send_data(struct mhuv2 *mhu, struct mbox_chan *chan,
|
|
void *arg)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mhu->doorbell_pending_lock, flags);
|
|
|
|
priv->pending = 1;
|
|
writel_relaxed(BIT(priv->doorbell),
|
|
&mhu->send->ch_wn[priv->ch_wn_idx].stat_set);
|
|
|
|
spin_unlock_irqrestore(&mhu->doorbell_pending_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mhuv2_protocol_ops mhuv2_doorbell_ops = {
|
|
.rx_startup = mhuv2_doorbell_rx_startup,
|
|
.rx_shutdown = mhuv2_doorbell_rx_shutdown,
|
|
.read_data = mhuv2_doorbell_read_data,
|
|
.last_tx_done = mhuv2_doorbell_last_tx_done,
|
|
.send_data = mhuv2_doorbell_send_data,
|
|
};
|
|
#define IS_PROTOCOL_DOORBELL(_priv) (_priv->ops == &mhuv2_doorbell_ops)
|
|
|
|
/* ============= Data transfer transport protocol operations ================ */
|
|
|
|
static int mhuv2_data_transfer_rx_startup(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
/*
|
|
* The protocol mandates that all but the last status register must be
|
|
* masked.
|
|
*/
|
|
writel_relaxed(0xFFFFFFFF, &mhu->recv->ch_wn[i].mask_clear);
|
|
return 0;
|
|
}
|
|
|
|
static void mhuv2_data_transfer_rx_shutdown(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
writel_relaxed(0xFFFFFFFF, &mhu->recv->ch_wn[i].mask_set);
|
|
}
|
|
|
|
static void *mhuv2_data_transfer_read_data(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
const int windows = priv->windows;
|
|
struct arm_mhuv2_mbox_msg *msg;
|
|
u32 *data;
|
|
int i, idx;
|
|
|
|
msg = kzalloc(sizeof(*msg) + windows * MHUV2_STAT_BYTES, GFP_KERNEL);
|
|
if (!msg)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
data = msg->data = msg + 1;
|
|
msg->len = windows * MHUV2_STAT_BYTES;
|
|
|
|
/*
|
|
* Messages are expected in order of most significant word to least
|
|
* significant word. Refer mhuv2_data_transfer_send_data() for more
|
|
* details.
|
|
*
|
|
* We also need to read the stat register instead of stat_masked, as we
|
|
* masked all but the last window.
|
|
*
|
|
* Last channel window must be cleared as the final operation. Upon
|
|
* clearing the last channel window register, which is unmasked in
|
|
* data-transfer protocol, the interrupt is de-asserted.
|
|
*/
|
|
for (i = 0; i < windows; i++) {
|
|
idx = priv->ch_wn_idx + i;
|
|
data[windows - 1 - i] = readl_relaxed(&mhu->recv->ch_wn[idx].stat);
|
|
writel_relaxed(0xFFFFFFFF, &mhu->recv->ch_wn[idx].stat_clear);
|
|
}
|
|
|
|
return msg;
|
|
}
|
|
|
|
static void mhuv2_data_transfer_tx_startup(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
/* Enable interrupts only for the last window */
|
|
if (mhu->minor) {
|
|
writel_relaxed(0x1, &mhu->send->ch_wn[i].int_clr);
|
|
writel_relaxed(0x1, &mhu->send->ch_wn[i].int_en);
|
|
}
|
|
}
|
|
|
|
static void mhuv2_data_transfer_tx_shutdown(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
if (mhu->minor)
|
|
writel_relaxed(0x0, &mhu->send->ch_wn[i].int_en);
|
|
}
|
|
|
|
static int mhuv2_data_transfer_last_tx_done(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
/* Just checking the last channel window should be enough */
|
|
return !readl_relaxed(&mhu->send->ch_wn[i].stat);
|
|
}
|
|
|
|
/*
|
|
* Message will be transmitted from most significant to least significant word.
|
|
* This is to allow for messages shorter than channel windows to still trigger
|
|
* the receiver interrupt which gets activated when the last stat register is
|
|
* written. As an example, a 6-word message is to be written on a 4-channel MHU
|
|
* connection: Registers marked with '*' are masked, and will not generate an
|
|
* interrupt on the receiver side once written.
|
|
*
|
|
* u32 *data = [0x00000001], [0x00000002], [0x00000003], [0x00000004],
|
|
* [0x00000005], [0x00000006]
|
|
*
|
|
* ROUND 1:
|
|
* stat reg To write Write sequence
|
|
* [ stat 3 ] <- [0x00000001] 4 <- triggers interrupt on receiver
|
|
* [ stat 2 ] <- [0x00000002] 3
|
|
* [ stat 1 ] <- [0x00000003] 2
|
|
* [ stat 0 ] <- [0x00000004] 1
|
|
*
|
|
* data += 4 // Increment data pointer by number of stat regs
|
|
*
|
|
* ROUND 2:
|
|
* stat reg To write Write sequence
|
|
* [ stat 3 ] <- [0x00000005] 2 <- triggers interrupt on receiver
|
|
* [ stat 2 ] <- [0x00000006] 1
|
|
* [ stat 1 ] <- [0x00000000]
|
|
* [ stat 0 ] <- [0x00000000]
|
|
*/
|
|
static int mhuv2_data_transfer_send_data(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan, void *arg)
|
|
{
|
|
const struct arm_mhuv2_mbox_msg *msg = arg;
|
|
int bytes_left = msg->len, bytes_to_send, bytes_in_round, i;
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int windows = priv->windows;
|
|
u32 *data = msg->data, word;
|
|
|
|
while (bytes_left) {
|
|
if (!data[0]) {
|
|
dev_err(mhu->mbox.dev, "Data aligned at first window can't be zero to guarantee interrupt generation at receiver");
|
|
return -EINVAL;
|
|
}
|
|
|
|
while(!mhuv2_data_transfer_last_tx_done(mhu, chan))
|
|
continue;
|
|
|
|
bytes_in_round = min(bytes_left, (int)(windows * MHUV2_STAT_BYTES));
|
|
|
|
for (i = windows - 1; i >= 0; i--) {
|
|
/* Data less than windows can transfer ? */
|
|
if (unlikely(bytes_in_round <= i * MHUV2_STAT_BYTES))
|
|
continue;
|
|
|
|
word = data[i];
|
|
bytes_to_send = bytes_in_round & (MHUV2_STAT_BYTES - 1);
|
|
if (unlikely(bytes_to_send))
|
|
word &= LSB_MASK(bytes_to_send);
|
|
else
|
|
bytes_to_send = MHUV2_STAT_BYTES;
|
|
|
|
writel_relaxed(word, &mhu->send->ch_wn[priv->ch_wn_idx + windows - 1 - i].stat_set);
|
|
bytes_left -= bytes_to_send;
|
|
bytes_in_round -= bytes_to_send;
|
|
}
|
|
|
|
data += windows;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mhuv2_protocol_ops mhuv2_data_transfer_ops = {
|
|
.rx_startup = mhuv2_data_transfer_rx_startup,
|
|
.rx_shutdown = mhuv2_data_transfer_rx_shutdown,
|
|
.read_data = mhuv2_data_transfer_read_data,
|
|
.tx_startup = mhuv2_data_transfer_tx_startup,
|
|
.tx_shutdown = mhuv2_data_transfer_tx_shutdown,
|
|
.last_tx_done = mhuv2_data_transfer_last_tx_done,
|
|
.send_data = mhuv2_data_transfer_send_data,
|
|
};
|
|
|
|
/* Interrupt handlers */
|
|
|
|
static struct mbox_chan *get_irq_chan_comb(struct mhuv2 *mhu, u32 __iomem *reg)
|
|
{
|
|
struct mbox_chan *chans = mhu->mbox.chans;
|
|
int channel = 0, i, offset = 0, windows, protocol, ch_wn;
|
|
u32 stat;
|
|
|
|
for (i = 0; i < MHUV2_CMB_INT_ST_REG_CNT; i++) {
|
|
stat = readl_relaxed(reg + i);
|
|
if (!stat)
|
|
continue;
|
|
|
|
ch_wn = i * MHUV2_STAT_BITS + __builtin_ctz(stat);
|
|
|
|
for (i = 0; i < mhu->length; i += 2) {
|
|
protocol = mhu->protocols[i];
|
|
windows = mhu->protocols[i + 1];
|
|
|
|
if (ch_wn >= offset + windows) {
|
|
if (protocol == DOORBELL)
|
|
channel += MHUV2_STAT_BITS * windows;
|
|
else
|
|
channel++;
|
|
|
|
offset += windows;
|
|
continue;
|
|
}
|
|
|
|
/* Return first chan of the window in doorbell mode */
|
|
if (protocol == DOORBELL)
|
|
channel += MHUV2_STAT_BITS * (ch_wn - offset);
|
|
|
|
return &chans[channel];
|
|
}
|
|
}
|
|
|
|
return ERR_PTR(-EIO);
|
|
}
|
|
|
|
static irqreturn_t mhuv2_sender_interrupt(int irq, void *data)
|
|
{
|
|
struct mhuv2 *mhu = data;
|
|
struct device *dev = mhu->mbox.dev;
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
struct mbox_chan *chan;
|
|
unsigned long flags;
|
|
int i, found = 0;
|
|
u32 stat;
|
|
|
|
chan = get_irq_chan_comb(mhu, mhu->send->chcomb_int_st);
|
|
if (IS_ERR(chan)) {
|
|
dev_warn(dev, "Failed to find channel for the Tx interrupt\n");
|
|
return IRQ_NONE;
|
|
}
|
|
priv = chan->con_priv;
|
|
|
|
if (!IS_PROTOCOL_DOORBELL(priv)) {
|
|
writel_relaxed(1, &mhu->send->ch_wn[priv->ch_wn_idx + priv->windows - 1].int_clr);
|
|
|
|
if (chan->cl) {
|
|
mbox_chan_txdone(chan, 0);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
dev_warn(dev, "Tx interrupt Received on channel (%u) not currently attached to a mailbox client\n",
|
|
priv->ch_wn_idx);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Clear the interrupt first, so we don't miss any doorbell later */
|
|
writel_relaxed(1, &mhu->send->ch_wn[priv->ch_wn_idx].int_clr);
|
|
|
|
/*
|
|
* In Doorbell mode, make sure no new transitions happen while the
|
|
* interrupt handler is trying to find the finished doorbell tx
|
|
* operations, else we may think few of the transfers were complete
|
|
* before they actually were.
|
|
*/
|
|
spin_lock_irqsave(&mhu->doorbell_pending_lock, flags);
|
|
|
|
/*
|
|
* In case of doorbell mode, the first channel of the window is returned
|
|
* by get_irq_chan_comb(). Find all the pending channels here.
|
|
*/
|
|
stat = readl_relaxed(&mhu->send->ch_wn[priv->ch_wn_idx].stat);
|
|
|
|
for (i = 0; i < MHUV2_STAT_BITS; i++) {
|
|
priv = chan[i].con_priv;
|
|
|
|
/* Find cases where pending was 1, but stat's bit is cleared */
|
|
if (priv->pending ^ ((stat >> i) & 0x1)) {
|
|
BUG_ON(!priv->pending);
|
|
|
|
if (!chan->cl) {
|
|
dev_warn(dev, "Tx interrupt received on doorbell (%u : %u) channel not currently attached to a mailbox client\n",
|
|
priv->ch_wn_idx, i);
|
|
continue;
|
|
}
|
|
|
|
mbox_chan_txdone(&chan[i], 0);
|
|
priv->pending = 0;
|
|
found++;
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&mhu->doorbell_pending_lock, flags);
|
|
|
|
if (!found) {
|
|
/*
|
|
* We may have already processed the doorbell in the previous
|
|
* iteration if the interrupt came right after we cleared it but
|
|
* before we read the stat register.
|
|
*/
|
|
dev_dbg(dev, "Couldn't find the doorbell (%u) for the Tx interrupt interrupt\n",
|
|
priv->ch_wn_idx);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct mbox_chan *get_irq_chan_comb_rx(struct mhuv2 *mhu)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
struct mbox_chan *chan;
|
|
u32 stat;
|
|
|
|
chan = get_irq_chan_comb(mhu, mhu->recv->chcomb_int_st);
|
|
if (IS_ERR(chan))
|
|
return chan;
|
|
|
|
priv = chan->con_priv;
|
|
if (!IS_PROTOCOL_DOORBELL(priv))
|
|
return chan;
|
|
|
|
/*
|
|
* In case of doorbell mode, the first channel of the window is returned
|
|
* by the routine. Find the exact channel here.
|
|
*/
|
|
stat = readl_relaxed(&mhu->recv->ch_wn[priv->ch_wn_idx].stat_masked);
|
|
BUG_ON(!stat);
|
|
|
|
return chan + __builtin_ctz(stat);
|
|
}
|
|
|
|
static struct mbox_chan *get_irq_chan_stat_rx(struct mhuv2 *mhu)
|
|
{
|
|
struct mbox_chan *chans = mhu->mbox.chans;
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
u32 stat;
|
|
int i = 0;
|
|
|
|
while (i < mhu->mbox.num_chans) {
|
|
priv = chans[i].con_priv;
|
|
stat = readl_relaxed(&mhu->recv->ch_wn[priv->ch_wn_idx].stat_masked);
|
|
|
|
if (stat) {
|
|
if (IS_PROTOCOL_DOORBELL(priv))
|
|
i += __builtin_ctz(stat);
|
|
return &chans[i];
|
|
}
|
|
|
|
i += IS_PROTOCOL_DOORBELL(priv) ? MHUV2_STAT_BITS : 1;
|
|
}
|
|
|
|
return ERR_PTR(-EIO);
|
|
}
|
|
|
|
static struct mbox_chan *get_irq_chan_rx(struct mhuv2 *mhu)
|
|
{
|
|
if (!mhu->minor)
|
|
return get_irq_chan_stat_rx(mhu);
|
|
|
|
return get_irq_chan_comb_rx(mhu);
|
|
}
|
|
|
|
static irqreturn_t mhuv2_receiver_interrupt(int irq, void *arg)
|
|
{
|
|
struct mhuv2 *mhu = arg;
|
|
struct mbox_chan *chan = get_irq_chan_rx(mhu);
|
|
struct device *dev = mhu->mbox.dev;
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
int ret = IRQ_NONE;
|
|
void *data;
|
|
|
|
if (IS_ERR(chan)) {
|
|
dev_warn(dev, "Failed to find channel for the rx interrupt\n");
|
|
return IRQ_NONE;
|
|
}
|
|
priv = chan->con_priv;
|
|
|
|
/* Read and clear the data first */
|
|
data = priv->ops->read_data(mhu, chan);
|
|
|
|
if (!chan->cl) {
|
|
dev_warn(dev, "Received data on channel (%u) not currently attached to a mailbox client\n",
|
|
priv->ch_wn_idx);
|
|
} else if (IS_ERR(data)) {
|
|
dev_err(dev, "Failed to read data: %lu\n", PTR_ERR(data));
|
|
} else {
|
|
mbox_chan_received_data(chan, data);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if (!IS_ERR(data))
|
|
kfree(data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Sender and receiver ops */
|
|
static bool mhuv2_sender_last_tx_done(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
return priv->ops->last_tx_done(mhu, chan);
|
|
}
|
|
|
|
static int mhuv2_sender_send_data(struct mbox_chan *chan, void *data)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
if (!priv->ops->last_tx_done(mhu, chan))
|
|
return -EBUSY;
|
|
|
|
return priv->ops->send_data(mhu, chan, data);
|
|
}
|
|
|
|
static int mhuv2_sender_startup(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
if (priv->ops->tx_startup)
|
|
priv->ops->tx_startup(mhu, chan);
|
|
return 0;
|
|
}
|
|
|
|
static void mhuv2_sender_shutdown(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
if (priv->ops->tx_shutdown)
|
|
priv->ops->tx_shutdown(mhu, chan);
|
|
}
|
|
|
|
static const struct mbox_chan_ops mhuv2_sender_ops = {
|
|
.send_data = mhuv2_sender_send_data,
|
|
.startup = mhuv2_sender_startup,
|
|
.shutdown = mhuv2_sender_shutdown,
|
|
.last_tx_done = mhuv2_sender_last_tx_done,
|
|
};
|
|
|
|
static int mhuv2_receiver_startup(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
return priv->ops->rx_startup(mhu, chan);
|
|
}
|
|
|
|
static void mhuv2_receiver_shutdown(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
priv->ops->rx_shutdown(mhu, chan);
|
|
}
|
|
|
|
static int mhuv2_receiver_send_data(struct mbox_chan *chan, void *data)
|
|
{
|
|
dev_err(chan->mbox->dev,
|
|
"Trying to transmit on a receiver MHU frame\n");
|
|
return -EIO;
|
|
}
|
|
|
|
static bool mhuv2_receiver_last_tx_done(struct mbox_chan *chan)
|
|
{
|
|
dev_err(chan->mbox->dev, "Trying to Tx poll on a receiver MHU frame\n");
|
|
return true;
|
|
}
|
|
|
|
static const struct mbox_chan_ops mhuv2_receiver_ops = {
|
|
.send_data = mhuv2_receiver_send_data,
|
|
.startup = mhuv2_receiver_startup,
|
|
.shutdown = mhuv2_receiver_shutdown,
|
|
.last_tx_done = mhuv2_receiver_last_tx_done,
|
|
};
|
|
|
|
static struct mbox_chan *mhuv2_mbox_of_xlate(struct mbox_controller *mbox,
|
|
const struct of_phandle_args *pa)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(mbox);
|
|
struct mbox_chan *chans = mbox->chans;
|
|
int channel = 0, i, offset, doorbell, protocol, windows;
|
|
|
|
if (pa->args_count != 2)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
offset = pa->args[0];
|
|
doorbell = pa->args[1];
|
|
if (doorbell >= MHUV2_STAT_BITS)
|
|
goto out;
|
|
|
|
for (i = 0; i < mhu->length; i += 2) {
|
|
protocol = mhu->protocols[i];
|
|
windows = mhu->protocols[i + 1];
|
|
|
|
if (protocol == DOORBELL) {
|
|
if (offset < windows)
|
|
return &chans[channel + MHUV2_STAT_BITS * offset + doorbell];
|
|
|
|
channel += MHUV2_STAT_BITS * windows;
|
|
offset -= windows;
|
|
} else {
|
|
if (offset == 0) {
|
|
if (doorbell)
|
|
goto out;
|
|
|
|
return &chans[channel];
|
|
}
|
|
|
|
channel++;
|
|
offset--;
|
|
}
|
|
}
|
|
|
|
out:
|
|
dev_err(mbox->dev, "Couldn't xlate to a valid channel (%d: %d)\n",
|
|
pa->args[0], doorbell);
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
static int mhuv2_verify_protocol(struct mhuv2 *mhu)
|
|
{
|
|
struct device *dev = mhu->mbox.dev;
|
|
int protocol, windows, channels = 0, total_windows = 0, i;
|
|
|
|
for (i = 0; i < mhu->length; i += 2) {
|
|
protocol = mhu->protocols[i];
|
|
windows = mhu->protocols[i + 1];
|
|
|
|
if (!windows) {
|
|
dev_err(dev, "Window size can't be zero (%d)\n", i);
|
|
return -EINVAL;
|
|
}
|
|
total_windows += windows;
|
|
|
|
if (protocol == DOORBELL) {
|
|
channels += MHUV2_STAT_BITS * windows;
|
|
} else if (protocol == DATA_TRANSFER) {
|
|
channels++;
|
|
} else {
|
|
dev_err(dev, "Invalid protocol (%d) present in %s property at index %d\n",
|
|
protocol, MHUV2_PROTOCOL_PROP, i);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (total_windows > mhu->windows) {
|
|
dev_err(dev, "Channel windows can't be more than what's implemented by the hardware ( %d: %d)\n",
|
|
total_windows, mhu->windows);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mhu->mbox.num_chans = channels;
|
|
return 0;
|
|
}
|
|
|
|
static int mhuv2_allocate_channels(struct mhuv2 *mhu)
|
|
{
|
|
struct mbox_controller *mbox = &mhu->mbox;
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
struct device *dev = mbox->dev;
|
|
struct mbox_chan *chans;
|
|
int protocol, windows = 0, next_window = 0, i, j, k;
|
|
|
|
chans = devm_kcalloc(dev, mbox->num_chans, sizeof(*chans), GFP_KERNEL);
|
|
if (!chans)
|
|
return -ENOMEM;
|
|
|
|
mbox->chans = chans;
|
|
|
|
for (i = 0; i < mhu->length; i += 2) {
|
|
next_window += windows;
|
|
|
|
protocol = mhu->protocols[i];
|
|
windows = mhu->protocols[i + 1];
|
|
|
|
if (protocol == DATA_TRANSFER) {
|
|
priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->ch_wn_idx = next_window;
|
|
priv->ops = &mhuv2_data_transfer_ops;
|
|
priv->windows = windows;
|
|
chans++->con_priv = priv;
|
|
continue;
|
|
}
|
|
|
|
for (j = 0; j < windows; j++) {
|
|
for (k = 0; k < MHUV2_STAT_BITS; k++) {
|
|
priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->ch_wn_idx = next_window + j;
|
|
priv->ops = &mhuv2_doorbell_ops;
|
|
priv->doorbell = k;
|
|
chans++->con_priv = priv;
|
|
}
|
|
|
|
/*
|
|
* Permanently enable interrupt as we can't
|
|
* control it per doorbell.
|
|
*/
|
|
if (mhu->frame == SENDER_FRAME && mhu->minor)
|
|
writel_relaxed(0x1, &mhu->send->ch_wn[priv->ch_wn_idx].int_en);
|
|
}
|
|
}
|
|
|
|
/* Make sure we have initialized all channels */
|
|
BUG_ON(chans - mbox->chans != mbox->num_chans);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mhuv2_parse_channels(struct mhuv2 *mhu)
|
|
{
|
|
struct device *dev = mhu->mbox.dev;
|
|
const struct device_node *np = dev->of_node;
|
|
int ret, count;
|
|
u32 *protocols;
|
|
|
|
count = of_property_count_u32_elems(np, MHUV2_PROTOCOL_PROP);
|
|
if (count <= 0 || count % 2) {
|
|
dev_err(dev, "Invalid %s property (%d)\n", MHUV2_PROTOCOL_PROP,
|
|
count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
protocols = devm_kmalloc_array(dev, count, sizeof(*protocols), GFP_KERNEL);
|
|
if (!protocols)
|
|
return -ENOMEM;
|
|
|
|
ret = of_property_read_u32_array(np, MHUV2_PROTOCOL_PROP, protocols, count);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to read %s property: %d\n",
|
|
MHUV2_PROTOCOL_PROP, ret);
|
|
return ret;
|
|
}
|
|
|
|
mhu->protocols = protocols;
|
|
mhu->length = count;
|
|
|
|
ret = mhuv2_verify_protocol(mhu);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mhuv2_allocate_channels(mhu);
|
|
}
|
|
|
|
static int mhuv2_tx_init(struct amba_device *adev, struct mhuv2 *mhu,
|
|
void __iomem *reg)
|
|
{
|
|
struct device *dev = mhu->mbox.dev;
|
|
int ret, i;
|
|
|
|
mhu->frame = SENDER_FRAME;
|
|
mhu->mbox.ops = &mhuv2_sender_ops;
|
|
mhu->send = reg;
|
|
|
|
mhu->windows = readl_relaxed_bitfield(&mhu->send->mhu_cfg, struct mhu_cfg_t, num_ch);
|
|
mhu->minor = readl_relaxed_bitfield(&mhu->send->aidr, struct aidr_t, arch_minor_rev);
|
|
|
|
spin_lock_init(&mhu->doorbell_pending_lock);
|
|
|
|
/*
|
|
* For minor version 1 and forward, tx interrupt is provided by
|
|
* the controller.
|
|
*/
|
|
if (mhu->minor && adev->irq[0]) {
|
|
ret = devm_request_threaded_irq(dev, adev->irq[0], NULL,
|
|
mhuv2_sender_interrupt,
|
|
IRQF_ONESHOT, "mhuv2-tx", mhu);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to request tx IRQ, fallback to polling mode: %d\n",
|
|
ret);
|
|
} else {
|
|
mhu->mbox.txdone_irq = true;
|
|
mhu->mbox.txdone_poll = false;
|
|
mhu->irq = adev->irq[0];
|
|
|
|
writel_relaxed_bitfield(1, &mhu->send->int_en, struct int_en_t, chcomb);
|
|
|
|
/* Disable all channel interrupts */
|
|
for (i = 0; i < mhu->windows; i++)
|
|
writel_relaxed(0x0, &mhu->send->ch_wn[i].int_en);
|
|
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
mhu->mbox.txdone_irq = false;
|
|
mhu->mbox.txdone_poll = true;
|
|
mhu->mbox.txpoll_period = 1;
|
|
|
|
out:
|
|
/* Wait for receiver to be ready */
|
|
writel_relaxed(0x1, &mhu->send->access_request);
|
|
while (!readl_relaxed(&mhu->send->access_ready))
|
|
continue;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mhuv2_rx_init(struct amba_device *adev, struct mhuv2 *mhu,
|
|
void __iomem *reg)
|
|
{
|
|
struct device *dev = mhu->mbox.dev;
|
|
int ret, i;
|
|
|
|
mhu->frame = RECEIVER_FRAME;
|
|
mhu->mbox.ops = &mhuv2_receiver_ops;
|
|
mhu->recv = reg;
|
|
|
|
mhu->windows = readl_relaxed_bitfield(&mhu->recv->mhu_cfg, struct mhu_cfg_t, num_ch);
|
|
mhu->minor = readl_relaxed_bitfield(&mhu->recv->aidr, struct aidr_t, arch_minor_rev);
|
|
|
|
mhu->irq = adev->irq[0];
|
|
if (!mhu->irq) {
|
|
dev_err(dev, "Missing receiver IRQ\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(dev, mhu->irq, NULL,
|
|
mhuv2_receiver_interrupt, IRQF_ONESHOT,
|
|
"mhuv2-rx", mhu);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to request rx IRQ\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Mask all the channel windows */
|
|
for (i = 0; i < mhu->windows; i++)
|
|
writel_relaxed(0xFFFFFFFF, &mhu->recv->ch_wn[i].mask_set);
|
|
|
|
if (mhu->minor)
|
|
writel_relaxed_bitfield(1, &mhu->recv->int_en, struct int_en_t, chcomb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mhuv2_probe(struct amba_device *adev, const struct amba_id *id)
|
|
{
|
|
struct device *dev = &adev->dev;
|
|
const struct device_node *np = dev->of_node;
|
|
struct mhuv2 *mhu;
|
|
void __iomem *reg;
|
|
int ret = -EINVAL;
|
|
|
|
reg = devm_of_iomap(dev, dev->of_node, 0, NULL);
|
|
if (!reg)
|
|
return -ENOMEM;
|
|
|
|
mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
|
|
if (!mhu)
|
|
return -ENOMEM;
|
|
|
|
mhu->mbox.dev = dev;
|
|
mhu->mbox.of_xlate = mhuv2_mbox_of_xlate;
|
|
|
|
if (of_device_is_compatible(np, "arm,mhuv2-tx"))
|
|
ret = mhuv2_tx_init(adev, mhu, reg);
|
|
else if (of_device_is_compatible(np, "arm,mhuv2-rx"))
|
|
ret = mhuv2_rx_init(adev, mhu, reg);
|
|
else
|
|
dev_err(dev, "Invalid compatible property\n");
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Channel windows can't be 0 */
|
|
BUG_ON(!mhu->windows);
|
|
|
|
ret = mhuv2_parse_channels(mhu);
|
|
if (ret)
|
|
return ret;
|
|
|
|
amba_set_drvdata(adev, mhu);
|
|
|
|
ret = devm_mbox_controller_register(dev, &mhu->mbox);
|
|
if (ret)
|
|
dev_err(dev, "failed to register ARM MHUv2 driver %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mhuv2_remove(struct amba_device *adev)
|
|
{
|
|
struct mhuv2 *mhu = amba_get_drvdata(adev);
|
|
|
|
if (mhu->frame == SENDER_FRAME)
|
|
writel_relaxed(0x0, &mhu->send->access_request);
|
|
}
|
|
|
|
static struct amba_id mhuv2_ids[] = {
|
|
{
|
|
/* 2.0 */
|
|
.id = 0xbb0d1,
|
|
.mask = 0xfffff,
|
|
},
|
|
{
|
|
/* 2.1 */
|
|
.id = 0xbb076,
|
|
.mask = 0xfffff,
|
|
},
|
|
{ 0, 0 },
|
|
};
|
|
MODULE_DEVICE_TABLE(amba, mhuv2_ids);
|
|
|
|
static struct amba_driver mhuv2_driver = {
|
|
.drv = {
|
|
.name = "arm-mhuv2",
|
|
},
|
|
.id_table = mhuv2_ids,
|
|
.probe = mhuv2_probe,
|
|
.remove = mhuv2_remove,
|
|
};
|
|
module_amba_driver(mhuv2_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("ARM MHUv2 Driver");
|
|
MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
|
|
MODULE_AUTHOR("Tushar Khandelwal <tushar.khandelwal@arm.com>");
|