Felix Fietkau 9cc2f3e881 ath9k_hw: prevent a fast channel change after a rx DMA stuck issue ... If the receive path gets stuck, a full hardware reset is necessary to recover from it. If this happens during a scan, the whole scan might fail, as each channel change bypasses the full reset sequence. Fix this by resetting the fast channel change flag if stopping the receive path fails. This will reduce the number of error messages that look like this: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>		2010-07-12 16:05:38 -04:00
..
ar9170	ar9170usb: fix read from freed driver context	2010-05-26 14:49:48 -04:00
ath5k	ath5k: fix antenna div gc for <= AR5K_SREV_PHY_2413	2010-06-28 15:16:19 -04:00
ath9k	ath9k_hw: prevent a fast channel change after a rx DMA stuck issue	2010-07-12 16:05:38 -04:00
ath.h
debug.c
debug.h
hw.c
Kconfig
main.c
Makefile
reg.h
regd.c
regd.h
regd_common.h