linux/tools
Greg Kroah-Hartman 7c0bc65c84 First set of new device support, features and cleanups for IIO in the 4.21 cycle
Along with the headline feature of 5 new drivers, we have the
 substantial addition of auxilliary sensor support on the lsm6sdx
 parts for ST.  There has also been a good set of staging cleanup
 in this period with more underway.
 
 An ever increasing number of devices supported with just a new
 ID which is a good sign that at least some manufacturers are
 continuing to stabilise their interfaces.
 
 New device support,
 * ad7124
   - New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts
     with the inevitable DT binding.
 * ad7949
   - New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs.
 * rm3100
   - New driver supporting PNIs RM3100 magnometer with bindings and
     vendor prefix.
 * ti-dac7311
   - New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with
     DT bindings.
 * vcnl5035
   - New driver supporting the light sensor part of the VCNL4035, with
     DT bindings
 
 Features,
 * bindings
   - Add a generic ADC channel binding as we keep reinventing this
     wheel.
 * adc128s052
   - Add IDs for additional pin compatible parts.
   - Add APCI ID seen on E3940 UP squared boards.
 * ad_sigma_delta
   - Allow for custom data register overiding default.
 * kxcjk1013
   - Add KIOX0009 ACPI ID as seen on the Acer One 10.
 * lsm6dsx
   - Rework leading to...
   - External sensor support using the built in I2C master.
   - Initial support for a slave lis2mdl magnetometer.
 * meson-saradc
   - Add temperature sensor support and bindings.
 * st_magn
   - New ID for lsm9dsl_magn with bindings
   - New ID for lis3de accelerometer
 * tpl0102
   - Add supprot for IIO_AVAIL_RANGE to report the range available
     from this device to userspace and in kernel users.
 
 Cleanups and minor fixes
 * tools
   - Allow outside specification of CFLAGS
 * ad2s90
   - Handle and spi_read error.
   - Handle spi_setup failure
   - Drop a pointless assignment.
   - Prevent a potentail race by moving device registration to after
     all other setup.
   - Add missing scale attribute.
   - Add a sanity check on channel type before trying to read it.
 * ad2s1210
   - Move to modern gpio descriptors.
   - Drop a gpioin flag which made no sense as far as we can tell.
   - Add dt table (bindings doc to follow when this is ready for
     moving out of staging).
 * ad5933
   - Drop camel-case naming of ext_clk_hz.
   - White space fixes.
 * ad7150
   - Local variable to shorten overly long line.
   - Alignment and line break fixes.
 * ad7280a
   - Handle an error path that was previously ignored.
   - Use crc8.h to build the crc table replacing custom code.
   - Avoid unecessary cast.
   - Power down the device if an error happens in probe
   - Use devm routines to simplify probe and remove.
 * ad7606
   - Alignment fixes.
 * ad7780
   - This worked as long as by coincidence an uninitialized value
     was 0.  Lets not rely on that.
   - Ensure gain update is only used with the ad778x chips that
     actually support it.
   - Tidy up pattern mask generation.
   - Read regulator when scale is requested (which should be infrequent)
     as it might have changed from initialization.
 * ad7816
   - Move to modern gpio descriptors
   - Don't use a busy_pin for ad7818 as there isn't one.
   - Ensure RD/WR and CONVST pins are outputs (previously they
     were brought up as inputs which doesn't seem to make any sense)
   - DT id table.
 * adc128s052
   - SPDX
 * adt7316
   - Alignment fix.
   - Fix data reading.  When using I2C the driver never actually
     used the value read.  This has been broken a very long time
     hence no rush to fix it now + the driver is undergoing a lot
     of cleanup.
   - Sanity check that the i2c read didn't fail to actually read
     anything.
 * dpot-dac
   - Mark a switch full through with slightly different text so that
     gcc doesn't warn on it.
 * gyro-adc
   - Fix a wrong file in the MAINTAINERS entry and add binding doc to the
     listed files.
 * ina2xx
   - Add some early returns to clarify error paths in switch.
 * lsm6dsx
   - MAINTAINERS entry.
 * max11100
   - SPDX
 * max9611
   - SPDX
 * mcp4131
   - use of_device_get_match_data in preference to spi_get_device_id
     approach.
 * rcar-adc
   - SPDX
 * sc27xx
   - Add ADC conversion timeout support to avoid possible fault.
 * ssp_sensors
   - Don't free managed resources manually.
 * st-magn
   - Add a comment to avoid future confusion over when to use -magn
     postfix (on multi chip in package parts)
   - Add BDU register for LIS3MDL where it seems to have been missed.
 * st-sensors
   - Minor spelling, grammar etc fixes.
 * tpl0102
   - Use a pointer rather than an index of an array to improve conciseness.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlv1wDARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Fohf9Q//fzNk9RoY98awaEmHRW7PLnHe1WKyQTV5
 M13EaFwm/NeWfT1kaNd/heZDnwucB34ONrcueNcM8MfwzPwWaL9UvSqEnSWIuTae
 hKdn/BMTfy168xhu95YPjHw4X42HwcXYlHL9XFsA0WERgaWsQu2EwIy1/3XRgIrt
 QPQVyJNUkLZmBuGcd2UhxzdTiLuh/hs7FFBg037hxaR77slWYKqAzwVa6eyz/jvo
 tRT9RE50O1FT3eDkBSw91nkamFcmFyyA2j4HQ33Aitjs5O1ML95xEJ0tMAznZfKn
 zAGCCUJjFYBvWPOpQ8xBA3tplFRGIyVhPJ5ZU+B2vZcxVXQ3IFZNqKRXfrUkAXpf
 PK2+05+HjHk1g7Ms1Tj4lF5AtP/nEQ8dvmGk6/nDU7Gt4Ytrpb0DhAuMGmN4S5ih
 zwwh+c6fLGCMz7KE8AoegOn3WF/FW1ZppTRjOWgqt7OP6lgoChPuTV5HGzxiZgr+
 MzY/fytbXTnmfTL1ZvZYPdOSjkHcS9+8rwu1Jirmb1Y5Qt3qpNAUsdsnt965mQaE
 bHmuqw8QJN31goTEsqvjnsFhH57dJ1HbmG0MSrF8XB0bQB5Xzbkd+RV4fls1J+SG
 XwpIzQLhPxF5da6G+I/SIgLX6nASacJp9hHEN/ZuM3IKr2UW8FCpCH6JmyX0i6OU
 dPjHsXrGTuI=
 =78Y3
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 4.21 cycle

Along with the headline feature of 5 new drivers, we have the
substantial addition of auxilliary sensor support on the lsm6sdx
parts for ST.  There has also been a good set of staging cleanup
in this period with more underway.

An ever increasing number of devices supported with just a new
ID which is a good sign that at least some manufacturers are
continuing to stabilise their interfaces.

New device support,
* ad7124
  - New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts
    with the inevitable DT binding.
* ad7949
  - New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs.
* rm3100
  - New driver supporting PNIs RM3100 magnometer with bindings and
    vendor prefix.
* ti-dac7311
  - New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with
    DT bindings.
* vcnl5035
  - New driver supporting the light sensor part of the VCNL4035, with
    DT bindings

Features,
* bindings
  - Add a generic ADC channel binding as we keep reinventing this
    wheel.
* adc128s052
  - Add IDs for additional pin compatible parts.
  - Add APCI ID seen on E3940 UP squared boards.
* ad_sigma_delta
  - Allow for custom data register overiding default.
* kxcjk1013
  - Add KIOX0009 ACPI ID as seen on the Acer One 10.
* lsm6dsx
  - Rework leading to...
  - External sensor support using the built in I2C master.
  - Initial support for a slave lis2mdl magnetometer.
* meson-saradc
  - Add temperature sensor support and bindings.
* st_magn
  - New ID for lsm9dsl_magn with bindings
  - New ID for lis3de accelerometer
* tpl0102
  - Add supprot for IIO_AVAIL_RANGE to report the range available
    from this device to userspace and in kernel users.

Cleanups and minor fixes
* tools
  - Allow outside specification of CFLAGS
* ad2s90
  - Handle and spi_read error.
  - Handle spi_setup failure
  - Drop a pointless assignment.
  - Prevent a potentail race by moving device registration to after
    all other setup.
  - Add missing scale attribute.
  - Add a sanity check on channel type before trying to read it.
* ad2s1210
  - Move to modern gpio descriptors.
  - Drop a gpioin flag which made no sense as far as we can tell.
  - Add dt table (bindings doc to follow when this is ready for
    moving out of staging).
* ad5933
  - Drop camel-case naming of ext_clk_hz.
  - White space fixes.
* ad7150
  - Local variable to shorten overly long line.
  - Alignment and line break fixes.
* ad7280a
  - Handle an error path that was previously ignored.
  - Use crc8.h to build the crc table replacing custom code.
  - Avoid unecessary cast.
  - Power down the device if an error happens in probe
  - Use devm routines to simplify probe and remove.
* ad7606
  - Alignment fixes.
* ad7780
  - This worked as long as by coincidence an uninitialized value
    was 0.  Lets not rely on that.
  - Ensure gain update is only used with the ad778x chips that
    actually support it.
  - Tidy up pattern mask generation.
  - Read regulator when scale is requested (which should be infrequent)
    as it might have changed from initialization.
* ad7816
  - Move to modern gpio descriptors
  - Don't use a busy_pin for ad7818 as there isn't one.
  - Ensure RD/WR and CONVST pins are outputs (previously they
    were brought up as inputs which doesn't seem to make any sense)
  - DT id table.
* adc128s052
  - SPDX
* adt7316
  - Alignment fix.
  - Fix data reading.  When using I2C the driver never actually
    used the value read.  This has been broken a very long time
    hence no rush to fix it now + the driver is undergoing a lot
    of cleanup.
  - Sanity check that the i2c read didn't fail to actually read
    anything.
* dpot-dac
  - Mark a switch full through with slightly different text so that
    gcc doesn't warn on it.
* gyro-adc
  - Fix a wrong file in the MAINTAINERS entry and add binding doc to the
    listed files.
* ina2xx
  - Add some early returns to clarify error paths in switch.
* lsm6dsx
  - MAINTAINERS entry.
* max11100
  - SPDX
* max9611
  - SPDX
* mcp4131
  - use of_device_get_match_data in preference to spi_get_device_id
    approach.
* rcar-adc
  - SPDX
* sc27xx
  - Add ADC conversion timeout support to avoid possible fault.
* ssp_sensors
  - Don't free managed resources manually.
* st-magn
  - Add a comment to avoid future confusion over when to use -magn
    postfix (on multi chip in package parts)
  - Add BDU register for LIS3MDL where it seems to have been missed.
* st-sensors
  - Minor spelling, grammar etc fixes.
* tpl0102
  - Use a pointer rather than an index of an array to improve conciseness.

* tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (80 commits)
  Staging: iio: adt7316: Add an extra check for 'ret' equals to 0
  Staging: iio: adt7316: Fix i2c data reading, set the data field
  dt-bindings: iio: adc: Add docs for ad7124
  iio: adc: Add ad7124 support
  dt-bindings: iio: adc: Add common ADCs properties to a separate file
  iio: ad_sigma_delta: Allow to provide custom data register address
  staging: iio: ad7816: Add device tree table.
  iio: imu: st_lsm6dsx: add entry in MAINTAINERS file
  iio: potentiometer: mcp4131: use of_device_get_match_data()
  staging: iio: adc: ad7280a: use devm_* APIs
  staging: iio: adc: ad7280a: power down the device on error in probe
  dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine
  iio: imu: st_lsm6dsx: add i2c embedded controller support
  iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine
  iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
  iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark
  iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap
  iio: imu: st_lsm6dsx: introduce locked read/write utility routines
  ...
2018-11-22 09:39:45 +01:00
..
accounting delayacct: track delays from thrashing cache pages 2018-10-26 16:26:32 -07:00
arch tools headers: Sync the various kvm.h header copies 2018-10-31 09:57:53 -03:00
bpf tools: bpftool: fix completion for "bpftool map update" 2018-10-21 20:45:14 +02:00
build Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2018-08-15 15:04:25 -07:00
cgroup tools: fix cross-compile var clobbering 2018-02-21 15:35:42 -08:00
crypto crypto: tools - Add cryptostat userspace 2018-09-28 12:46:26 +08:00
firewire
gpio Linux 4.16-rc5 2018-03-18 17:48:59 +01:00
hv tools: hv: fcopy: set 'error' in case an unknown operation was requested 2018-09-30 08:49:55 -07:00
iio tools iio: Override CFLAGS assignments 2018-10-21 13:25:42 +01:00
include Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-11-03 18:13:43 -07:00
kvm/kvm_stat tools/kvm_stat: cut down decimal places in update interval dialog 2018-10-01 15:40:59 +02:00
laptop tools: fix cross-compile var clobbering 2018-02-21 15:35:42 -08:00
leds tools: fix cross-compile var clobbering 2018-02-21 15:35:42 -08:00
lib Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-11-03 18:13:43 -07:00
memory-model tools/memory-model: Add more LKMM limitations 2018-10-02 10:28:04 +02:00
nfsd
objtool Merge branch 'core/urgent' into x86/urgent, to pick up objtool fix 2018-11-03 23:42:16 +01:00
pci tools: PCI: Change pcitest compiling process 2018-10-03 11:19:52 +01:00
pcmcia
perf Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-11-03 18:13:43 -07:00
power Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-10-23 16:16:40 +01:00
scripts Kbuild: fix # escaping in .cmd files for future Make 2018-04-11 00:03:02 +09:00
spi spi: spidev_test: Improve decoded text part of hex dump 2018-09-04 17:00:37 +01:00
testing powerpc fixes for 4.20 #2 2018-11-02 09:19:35 -07:00
thermal/tmon tools/thermal: tmon: fix for segfault 2018-03-27 09:51:23 +02:00
time
usb usbip: tools: fix atoi() on non-null terminated string 2018-10-18 19:44:39 +02:00
virtio tools/virtio: add kmalloc_array stub 2018-07-27 16:54:40 +03:00
vm tools/vm/page-types.c: fix "defined but not used" warning 2018-09-04 16:45:02 -07:00
wmi tools: fix cross-compile var clobbering 2018-02-21 15:35:42 -08:00
Makefile tools: PCI: Change pcitest compiling process 2018-10-03 11:19:52 +01:00