linux/arch/mips/emma2rh/markeins/irq.c
Ralf Baechle 937a801576 [MIPS] Complete fixes after removal of pt_regs argument to int handlers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:38:28 +01:00

133 lines
3.8 KiB
C

/*
* arch/mips/emma2rh/markeins/irq.c
* This file defines the irq handler for EMMA2RH.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/delay.h>
#include <asm/i8259.h>
#include <asm/irq_cpu.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/debug.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
/*
* IRQ mapping
*
* 0-7: 8 CPU interrupts
* 0 - software interrupt 0
* 1 - software interrupt 1
* 2 - most Vrc5477 interrupts are routed to this pin
* 3 - (optional) some other interrupts routed to this pin for debugg
* 4 - not used
* 5 - not used
* 6 - not used
* 7 - cpu timer (used by default)
*
*/
extern void emma2rh_sw_irq_init(u32 base);
extern void emma2rh_gpio_irq_init(u32 base);
extern void emma2rh_irq_init(u32 base);
extern void emma2rh_irq_dispatch(void);
static struct irqaction irq_cascade = {
.handler = no_action,
.flags = 0,
.mask = CPU_MASK_NONE,
.name = "cascade",
.dev_id = NULL,
.next = NULL,
};
void __init arch_init_irq(void)
{
u32 reg;
db_run(printk("markeins_irq_setup invoked.\n"));
/* by default, interrupts are disabled. */
emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);
emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0);
emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0);
emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0);
emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0);
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0);
clear_c0_status(0xff00);
set_c0_status(0x0400);
#define GPIO_PCI (0xf<<15)
/* setup GPIO interrupt for PCI interface */
/* direction input */
reg = emma2rh_in32(EMMA2RH_GPIO_DIR);
emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI);
/* disable interrupt */
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI);
/* level triggerd */
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE);
emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI);
reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A);
emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI));
/* interrupt clear */
emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI);
/* init all controllers */
emma2rh_irq_init(EMMA2RH_IRQ_BASE);
emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE);
emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE);
mips_cpu_irq_init(CPU_IRQ_BASE);
/* setup cascade interrupts */
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade);
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause();
if (pending & STATUSF_IP7)
do_IRQ(CPU_IRQ_BASE + 7);
else if (pending & STATUSF_IP2)
emma2rh_irq_dispatch();
else if (pending & STATUSF_IP1)
do_IRQ(CPU_IRQ_BASE + 1);
else if (pending & STATUSF_IP0)
do_IRQ(CPU_IRQ_BASE + 0);
else
spurious_interrupt();
}