linux/arch/arm/boot/dts/rk3066a.dtsi
Linus Torvalds d5aabbcaee ARM: SoC board updates for 3.13
Board-related updates. This branch is getting smaller and smaller, which is
 the whole idea so that's reassuring.
 
 Right now by far most of the code is related to shmobile updates, and
 they are now switching over to removal of board code and migration to
 multiplatform, so we'll see their board code base shrink in the near
 future too, I hope.
 
 In addition to that is some defconfig updates, some display updates for OMAP
 and a bit of new board support for Rockchip boards.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgBsmAAoJEIwa5zzehBx3m3oP/ingw9VE69O3GLjd2zWI35HJ
 +NuFmwlWFj+1XLysfCxHJn3rvkMJKM33ZcP6FkgJGMHfQRRBmrC0REG/nQq59riE
 c7R+Jguw044kAGH3evg4kCJ3gI+WD+H+juKf4IQ9bYDaneZGN9f0hkuzLRbmqwZP
 RIDa+q+Oo6Q3pcTUvkz2lMV6q7Ydb5H49suyPN+9muJ1wVYjFR+XuvnYzy/PO2lF
 kyIN2fijQN278QjM6eZEtsFoB7L7NmuZr8ZBTkekHSfybqIsb59JEqZER7huJSdR
 fEk0VQ/A6M2LQSRTL+UrCadFYaxDnW8wjxbpLUikhg7ONnrCBSGvVj4nFiEKAFdE
 R49YZ2hqhrXjie1kGoKuXGmxGG/7ODJWmWDgnIXx0daSOgPUomlO8YKtGeBO1/Zf
 6wsvAjiukcLV10JEF/rCslTEA/Ck5dJZjV6S/8hSy1N+CF4qZflSmXG0gb9tB+nv
 ztRN9gTlJSr/MpIE3jpbPFxNwef+UPW/R8fnO7fdnzPeOpwTDzZ1ydArC0IIpmgt
 Ngum5iyP4qcwZ91hWXhdAu3ZGeHWZ5tox1W/DMjkyTxCEDUUdtfkChOGf/Wmjg7z
 Rl5nyH2Y4xT0+Otn/0LIqKvEh1JwwX9FlIqkJI4IMrnYJwHQ4oBvOAGskW1ZsFPQ
 0OBbAAHS1tio3ZywNMIQ
 =ZYOa
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
 "Board-related updates.  This branch is getting smaller and smaller,
  which is the whole idea so that's reassuring.

  Right now by far most of the code is related to shmobile updates, and
  they are now switching over to removal of board code and migration to
  multiplatform, so we'll see their board code base shrink in the near
  future too, I hope.

  In addition to that is some defconfig updates, some display updates
  for OMAP and a bit of new board support for Rockchip boards"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (56 commits)
  ARM: rockchip: add support for rk3188 and Radxa Rock board
  ARM: rockchip: add dts for bqcurie2 tablet
  ARM: rockchip: enable arm-global-timer
  ARM: rockchip: move shared dt properties to common source file
  ARM: OMAP2+: display: Create omap_vout device inside omap_display_init
  ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init
  ARM: OMAP2+: display: Create omapdrm device inside omap_display_init
  ARM: OMAP2+: drm: Don't build device for DMM
  ARM: tegra: defconfig updates
  RX-51: Add support for OMAP3 ROM Random Number Generator
  ARM: OMAP3: RX-51: ARM errata 430973 workaround
  ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1
  ARM: shmobile: marzen: enable INTC IRQ
  ARM: shmobile: bockw: add SMSC support on reference
  ARM: shmobile: Use SMP on Koelsch
  ARM: shmobile: Remove KZM9D reference DTS
  ARM: shmobile: Let KZM9D multiplatform boot with KZM9D DTB
  ARM: shmobile: Remove non-multiplatform KZM9D reference support
  ARM: shmobile: Use KZM9D without reference for multiplatform
  ARM: shmobile: Sync KZM9D DTS with KZM9D reference DTS
  ...
2013-11-11 16:57:16 +09:00

273 lines
6.4 KiB
Plaintext

/*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3xxx.dtsi"
#include "rk3066a-clocks.dtsi"
/ {
compatible = "rockchip,rk3066a";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x1>;
};
};
soc {
timer@20038000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x20038000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates1 0>, <&clk_gates7 7>;
clock-names = "timer", "pclk";
};
timer@2003a000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2003a000 0x100>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates1 1>, <&clk_gates7 8>;
clock-names = "timer", "pclk";
};
timer@2000e000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2000e000 0x100>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates1 2>, <&clk_gates7 9>;
clock-names = "timer", "pclk";
};
pinctrl@20008000 {
compatible = "rockchip,rk3066a-pinctrl";
reg = <0x20008000 0x150>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@20034000 {
compatible = "rockchip,gpio-bank";
reg = <0x20034000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 9>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 10>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@2003e000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003e000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 11>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio3@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 12>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio4@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 13>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio6@2000a000 {
compatible = "rockchip,gpio-bank";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 15>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcfg_pull_default: pcfg_pull_default {
bias-pull-pin-default;
};
pcfg_pull_none: pcfg_pull_none {
bias-disable;
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
};
uart0_cts: uart0-cts {
rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
};
uart0_rts: uart0-rts {
rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
};
uart1_cts: uart1-cts {
rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
};
uart1_rts: uart1-rts {
rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
};
/* no rts / cts for uart2 */
};
uart3 {
uart3_xfer: uart3-xfer {
rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
};
uart3_cts: uart3-cts {
rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
};
uart3_rts: uart3-rts {
rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
};
};
sd0 {
sd0_clk: sd0-clk {
rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_cmd: sd0-cmd {
rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_cd: sd0-cd {
rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_wp: sd0-wp {
rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_bus1: sd0-bus-width1 {
rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_bus4: sd0-bus-width4 {
rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
};
};
sd1 {
sd1_clk: sd1-clk {
rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_cmd: sd1-cmd {
rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_cd: sd1-cd {
rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_wp: sd1-wp {
rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_bus1: sd1-bus-width1 {
rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_bus4: sd1-bus-width4 {
rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
};
};
};
};
};