linux/drivers/acpi/acpica/utxface.c
Rafael J. Wysocki 9874647ba1 ACPI / ACPICA: Do not execute _PRW methods during initialization
Currently, during initialization ACPICA walks the entire ACPI
namespace in search of any device objects with assciated _PRW
methods.  All of the _PRW methods found are executed in the process
to extract the GPE information returned by them, so that the GPEs in
question can be marked as "able to wakeup" (more precisely, the
ACPI_GPE_CAN_WAKE flag is set for them).  The only purpose of this
exercise is to avoid enabling the CAN_WAKE GPEs automatically, even
if there are _Lxx/_Exx methods associated with them.  However, it is
both costly and unnecessary, because the host OS has to execute the
_PRW methods anyway to check which devices can wake up the system
from sleep states.  Moreover, it then uses full information
returned by _PRW, including the GPE information, so it can take care
of disabling the GPEs if necessary.

Remove the code that walks the namespace and executes _PRW from
ACPICA and modify comments to reflect that change.  Make
acpi_bus_set_run_wake_flags() disable GPEs for wakeup devices
so that they don't cause spurious wakeup events to be signaled.
This not only reduces the complexity of the ACPICA initialization
code, but in some cases it should reduce the kernel boot time as
well.

Unfortunately, for this purpose we need a new ACPICA function,
acpi_gpe_can_wake(), to be called by the host OS in order to disable
the GPEs that can wake up the system and were previously enabled by
acpi_ev_initialize_gpe_block() or acpi_ev_update_gpes() (such a GPE
should be disabled only once, because the initialization code enables
it only once, but it may be pointed to by _PRW for multiple devices
and that's why the additional function is necessary).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-12 14:17:39 -04:00

533 lines
15 KiB
C

/******************************************************************************
*
* Module Name: utxface - External interfaces for "global" ACPI functions
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#include "acdebug.h"
#include "actables.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utxface")
#ifndef ACPI_ASL_COMPILER
/*******************************************************************************
*
* FUNCTION: acpi_initialize_subsystem
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Initializes all global variables. This is the first function
* called, so any early initialization belongs here.
*
******************************************************************************/
acpi_status __init acpi_initialize_subsystem(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_initialize_subsystem);
acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE;
ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace());
/* Initialize the OS-Dependent layer */
status = acpi_os_initialize();
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization"));
return_ACPI_STATUS(status);
}
/* Initialize all globals used by the subsystem */
status = acpi_ut_init_globals();
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"During initialization of globals"));
return_ACPI_STATUS(status);
}
/* Create the default mutex objects */
status = acpi_ut_mutex_initialize();
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"During Global Mutex creation"));
return_ACPI_STATUS(status);
}
/*
* Initialize the namespace manager and
* the root of the namespace tree
*/
status = acpi_ns_root_initialize();
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"During Namespace initialization"));
return_ACPI_STATUS(status);
}
/* If configured, initialize the AML debugger */
ACPI_DEBUGGER_EXEC(status = acpi_db_initialize());
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_enable_subsystem
*
* PARAMETERS: Flags - Init/enable Options
*
* RETURN: Status
*
* DESCRIPTION: Completes the subsystem initialization including hardware.
* Puts system into ACPI mode if it isn't already.
*
******************************************************************************/
acpi_status acpi_enable_subsystem(u32 flags)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
/* Enable ACPI mode */
if (!(flags & ACPI_NO_ACPI_ENABLE)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"[Init] Going into ACPI mode\n"));
acpi_gbl_original_mode = acpi_hw_get_mode();
status = acpi_enable();
if (ACPI_FAILURE(status)) {
ACPI_WARNING((AE_INFO, "AcpiEnable failed"));
return_ACPI_STATUS(status);
}
}
/*
* Obtain a permanent mapping for the FACS. This is required for the
* Global Lock and the Firmware Waking Vector
*/
status = acpi_tb_initialize_facs();
if (ACPI_FAILURE(status)) {
ACPI_WARNING((AE_INFO, "Could not map the FACS table"));
return_ACPI_STATUS(status);
}
/*
* Install the default op_region handlers. These are installed unless
* other handlers have already been installed via the
* install_address_space_handler interface.
*/
if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"[Init] Installing default address space handlers\n"));
status = acpi_ev_install_region_handlers();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/*
* Initialize ACPI Event handling (Fixed and General Purpose)
*
* Note1: We must have the hardware and events initialized before we can
* execute any control methods safely. Any control method can require
* ACPI hardware support, so the hardware must be fully initialized before
* any method execution!
*
* Note2: Fixed events are initialized and enabled here. GPEs are
* initialized, but cannot be enabled until after the hardware is
* completely initialized (SCI and global_lock activated)
*/
if (!(flags & ACPI_NO_EVENT_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"[Init] Initializing ACPI events\n"));
status = acpi_ev_initialize_events();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/*
* Install the SCI handler and Global Lock handler. This completes the
* hardware initialization.
*/
if (!(flags & ACPI_NO_HANDLER_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"[Init] Installing SCI/GL handlers\n"));
status = acpi_ev_install_xrupt_handlers();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enable_subsystem)
/*******************************************************************************
*
* FUNCTION: acpi_initialize_objects
*
* PARAMETERS: Flags - Init/enable Options
*
* RETURN: Status
*
* DESCRIPTION: Completes namespace initialization by initializing device
* objects and executing AML code for Regions, buffers, etc.
*
******************************************************************************/
acpi_status acpi_initialize_objects(u32 flags)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(acpi_initialize_objects);
/*
* Run all _REG methods
*
* Note: Any objects accessed by the _REG methods will be automatically
* initialized, even if they contain executable AML (see the call to
* acpi_ns_initialize_objects below).
*/
if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"[Init] Executing _REG OpRegion methods\n"));
status = acpi_ev_initialize_op_regions();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/*
* Execute any module-level code that was detected during the table load
* phase. Although illegal since ACPI 2.0, there are many machines that
* contain this type of code. Each block of detected executable AML code
* outside of any control method is wrapped with a temporary control
* method object and placed on a global list. The methods on this list
* are executed below.
*/
acpi_ns_exec_module_code_list();
/*
* Initialize the objects that remain uninitialized. This runs the
* executable AML that may be part of the declaration of these objects:
* operation_regions, buffer_fields, Buffers, and Packages.
*/
if (!(flags & ACPI_NO_OBJECT_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"[Init] Completing Initialization of ACPI Objects\n"));
status = acpi_ns_initialize_objects();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/*
* Initialize all device objects in the namespace. This runs the device
* _STA and _INI methods.
*/
if (!(flags & ACPI_NO_DEVICE_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"[Init] Initializing ACPI Devices\n"));
status = acpi_ns_initialize_devices();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
/*
* Complete the GPE initialization for the GPE blocks defined in the FADT
* (GPE block 0 and 1).
*
* NOTE: Currently, there seems to be no need to run the _REG methods
* before enabling the GPEs.
*/
if (!(flags & ACPI_NO_EVENT_INIT)) {
status = acpi_ev_install_fadt_gpes();
if (ACPI_FAILURE(status))
return (status);
}
/*
* Empty the caches (delete the cached objects) on the assumption that
* the table load filled them up more than they will be at runtime --
* thus wasting non-paged memory.
*/
status = acpi_purge_cached_objects();
acpi_gbl_startup_flags |= ACPI_INITIALIZED_OK;
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_initialize_objects)
#endif
/*******************************************************************************
*
* FUNCTION: acpi_terminate
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Shutdown the ACPICA subsystem and release all resources.
*
******************************************************************************/
acpi_status acpi_terminate(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_terminate);
/* Just exit if subsystem is already shutdown */
if (acpi_gbl_shutdown) {
ACPI_ERROR((AE_INFO, "ACPI Subsystem is already terminated"));
return_ACPI_STATUS(AE_OK);
}
/* Subsystem appears active, go ahead and shut it down */
acpi_gbl_shutdown = TRUE;
acpi_gbl_startup_flags = 0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem\n"));
/* Terminate the AML Debugger if present */
ACPI_DEBUGGER_EXEC(acpi_gbl_db_terminate_threads = TRUE);
/* Shutdown and free all resources */
acpi_ut_subsystem_shutdown();
/* Free the mutex objects */
acpi_ut_mutex_terminate();
#ifdef ACPI_DEBUGGER
/* Shut down the debugger */
acpi_db_terminate();
#endif
/* Now we can shutdown the OS-dependent layer */
status = acpi_os_terminate();
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_terminate)
#ifndef ACPI_ASL_COMPILER
#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
* FUNCTION: acpi_subsystem_status
*
* PARAMETERS: None
*
* RETURN: Status of the ACPI subsystem
*
* DESCRIPTION: Other drivers that use the ACPI subsystem should call this
* before making any other calls, to ensure the subsystem
* initialized successfully.
*
******************************************************************************/
acpi_status acpi_subsystem_status(void)
{
if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) {
return (AE_OK);
} else {
return (AE_ERROR);
}
}
ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
/*******************************************************************************
*
* FUNCTION: acpi_get_system_info
*
* PARAMETERS: out_buffer - A buffer to receive the resources for the
* device
*
* RETURN: Status - the status of the call
*
* DESCRIPTION: This function is called to get information about the current
* state of the ACPI subsystem. It will return system information
* in the out_buffer.
*
* If the function fails an appropriate status will be returned
* and the value of out_buffer is undefined.
*
******************************************************************************/
acpi_status acpi_get_system_info(struct acpi_buffer * out_buffer)
{
struct acpi_system_info *info_ptr;
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_get_system_info);
/* Parameter validation */
status = acpi_ut_validate_buffer(out_buffer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Validate/Allocate/Clear caller buffer */
status =
acpi_ut_initialize_buffer(out_buffer,
sizeof(struct acpi_system_info));
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* Populate the return buffer
*/
info_ptr = (struct acpi_system_info *)out_buffer->pointer;
info_ptr->acpi_ca_version = ACPI_CA_VERSION;
/* System flags (ACPI capabilities) */
info_ptr->flags = ACPI_SYS_MODE_ACPI;
/* Timer resolution - 24 or 32 bits */
if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
info_ptr->timer_resolution = 24;
} else {
info_ptr->timer_resolution = 32;
}
/* Clear the reserved fields */
info_ptr->reserved1 = 0;
info_ptr->reserved2 = 0;
/* Current debug levels */
info_ptr->debug_layer = acpi_dbg_layer;
info_ptr->debug_level = acpi_dbg_level;
return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_get_system_info)
/*****************************************************************************
*
* FUNCTION: acpi_install_initialization_handler
*
* PARAMETERS: Handler - Callback procedure
* Function - Not (currently) used, see below
*
* RETURN: Status
*
* DESCRIPTION: Install an initialization handler
*
* TBD: When a second function is added, must save the Function also.
*
****************************************************************************/
acpi_status
acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
{
if (!handler) {
return (AE_BAD_PARAMETER);
}
if (acpi_gbl_init_handler) {
return (AE_ALREADY_EXISTS);
}
acpi_gbl_init_handler = handler;
return AE_OK;
}
ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
#endif /* ACPI_FUTURE_USAGE */
/*****************************************************************************
*
* FUNCTION: acpi_purge_cached_objects
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Empty all caches (delete the cached objects)
*
****************************************************************************/
acpi_status acpi_purge_cached_objects(void)
{
ACPI_FUNCTION_TRACE(acpi_purge_cached_objects);
(void)acpi_os_purge_cache(acpi_gbl_state_cache);
(void)acpi_os_purge_cache(acpi_gbl_operand_cache);
(void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
(void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)
#endif