linux/arch/powerpc/platforms/chrp/gg2.h
Kumar Gala 33d71d26ba [POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need
To build arch/powerpc without including asm-ppc/ we need these files
in asm-powerpc/

Moved some headers under arch/powerpc/platforms if they were only used by
platform or driver files and fixed up the source file includes to match
the new locations

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:43:29 -05:00

62 lines
2.4 KiB
C

/*
* include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions
*
* Copyright (C) 1997 Geert Uytterhoeven
*
* This file is based on the following documentation:
*
* The VAS96011/12 Chipset, Data Book, Edition 1.0
* VLSI Technology, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#ifndef _ASMPPC_GG2_H
#define _ASMPPC_GG2_H
/*
* Memory Map (CHRP mode)
*/
#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */
#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */
#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */
#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */
#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */
/* special PCI cycles */
#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */
#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */
/*
* GG2 specific PCI Registers
*/
extern void __iomem *gg2_pci_config_base; /* kernel virtual address */
#define GG2_PCI_BUSNO 0x40 /* Bus number */
#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */
#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */
#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */
#define GG2_PCI_ADDR_MAP 0x5c /* Address map */
#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */
#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */
#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */
#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */
#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */
#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */
#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */
#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */
#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */
#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */
#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */
#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */
#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */
#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */
#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */
/* Cleared when read */
#endif /* _ASMPPC_GG2_H */