linux/drivers/usb/storage/sddr55.c
Jens Axboe 1f6f31a03e USB storage: sg chaining support
[PATCH] USB storage: sg chaining support

Modify usb_stor_access_xfer_buf() to take a pointer to an sg
entry pointer, so we can keep track of that instead of passing
around an integer index (which we can't use when dealing with
multiple scatterlist arrays).

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:20:59 +02:00

934 lines
23 KiB
C

/* Driver for SanDisk SDDR-55 SmartMedia reader
*
* $Id:$
*
* SDDR55 driver v0.1:
*
* First release
*
* Current development and maintenance by:
* (c) 2002 Simon Munton
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include "usb.h"
#include "transport.h"
#include "protocol.h"
#include "debug.h"
#include "sddr55.h"
#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
#define LSB_of(s) ((s)&0xFF)
#define MSB_of(s) ((s)>>8)
#define PAGESIZE 512
#define set_sense_info(sk, asc, ascq) \
do { \
info->sense_data[2] = sk; \
info->sense_data[12] = asc; \
info->sense_data[13] = ascq; \
} while (0)
struct sddr55_card_info {
unsigned long capacity; /* Size of card in bytes */
int max_log_blks; /* maximum number of logical blocks */
int pageshift; /* log2 of pagesize */
int smallpageshift; /* 1 if pagesize == 256 */
int blocksize; /* Size of block in pages */
int blockshift; /* log2 of blocksize */
int blockmask; /* 2^blockshift - 1 */
int read_only; /* non zero if card is write protected */
int force_read_only; /* non zero if we find a map error*/
int *lba_to_pba; /* logical to physical map */
int *pba_to_lba; /* physical to logical map */
int fatal_error; /* set if we detect something nasty */
unsigned long last_access; /* number of jiffies since we last talked to device */
unsigned char sense_data[18];
};
#define NOT_ALLOCATED 0xffffffff
#define BAD_BLOCK 0xffff
#define CIS_BLOCK 0x400
#define UNUSED_BLOCK 0x3ff
static int
sddr55_bulk_transport(struct us_data *us, int direction,
unsigned char *data, unsigned int len) {
struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
us->recv_bulk_pipe : us->send_bulk_pipe;
if (!len)
return USB_STOR_XFER_GOOD;
info->last_access = jiffies;
return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL);
}
/* check if card inserted, if there is, update read_only status
* return non zero if no card
*/
static int sddr55_status(struct us_data *us)
{
int result;
unsigned char *command = us->iobuf;
unsigned char *status = us->iobuf;
struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
/* send command */
memset(command, 0, 8);
command[5] = 0xB0;
command[7] = 0x80;
result = sddr55_bulk_transport(us,
DMA_TO_DEVICE, command, 8);
US_DEBUGP("Result for send_command in status %d\n",
result);
if (result != USB_STOR_XFER_GOOD) {
set_sense_info (4, 0, 0); /* hardware error */
return USB_STOR_TRANSPORT_ERROR;
}
result = sddr55_bulk_transport(us,
DMA_FROM_DEVICE, status, 4);
/* expect to get short transfer if no card fitted */
if (result == USB_STOR_XFER_SHORT || result == USB_STOR_XFER_STALLED) {
/* had a short transfer, no card inserted, free map memory */
kfree(info->lba_to_pba);
kfree(info->pba_to_lba);
info->lba_to_pba = NULL;
info->pba_to_lba = NULL;
info->fatal_error = 0;
info->force_read_only = 0;
set_sense_info (2, 0x3a, 0); /* not ready, medium not present */
return USB_STOR_TRANSPORT_FAILED;
}
if (result != USB_STOR_XFER_GOOD) {
set_sense_info (4, 0, 0); /* hardware error */
return USB_STOR_TRANSPORT_FAILED;
}
/* check write protect status */
info->read_only = (status[0] & 0x20);
/* now read status */
result = sddr55_bulk_transport(us,
DMA_FROM_DEVICE, status, 2);
if (result != USB_STOR_XFER_GOOD) {
set_sense_info (4, 0, 0); /* hardware error */
}
return (result == USB_STOR_XFER_GOOD ?
USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_FAILED);
}
static int sddr55_read_data(struct us_data *us,
unsigned int lba,
unsigned int page,
unsigned short sectors) {
int result = USB_STOR_TRANSPORT_GOOD;
unsigned char *command = us->iobuf;
unsigned char *status = us->iobuf;
struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
unsigned char *buffer;
unsigned int pba;
unsigned long address;
unsigned short pages;
unsigned int len, offset;
struct scatterlist *sg;
// Since we only read in one block at a time, we have to create
// a bounce buffer and move the data a piece at a time between the
// bounce buffer and the actual transfer buffer.
len = min((unsigned int) sectors, (unsigned int) info->blocksize >>
info->smallpageshift) * PAGESIZE;
buffer = kmalloc(len, GFP_NOIO);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR; /* out of memory */
offset = 0;
sg = NULL;
while (sectors>0) {
/* have we got to end? */
if (lba >= info->max_log_blks)
break;
pba = info->lba_to_pba[lba];
// Read as many sectors as possible in this block
pages = min((unsigned int) sectors << info->smallpageshift,
info->blocksize - page);
len = pages << info->pageshift;
US_DEBUGP("Read %02X pages, from PBA %04X"
" (LBA %04X) page %02X\n",
pages, pba, lba, page);
if (pba == NOT_ALLOCATED) {
/* no pba for this lba, fill with zeroes */
memset (buffer, 0, len);
} else {
address = (pba << info->blockshift) + page;
command[0] = 0;
command[1] = LSB_of(address>>16);
command[2] = LSB_of(address>>8);
command[3] = LSB_of(address);
command[4] = 0;
command[5] = 0xB0;
command[6] = LSB_of(pages << (1 - info->smallpageshift));
command[7] = 0x85;
/* send command */
result = sddr55_bulk_transport(us,
DMA_TO_DEVICE, command, 8);
US_DEBUGP("Result for send_command in read_data %d\n",
result);
if (result != USB_STOR_XFER_GOOD) {
result = USB_STOR_TRANSPORT_ERROR;
goto leave;
}
/* read data */
result = sddr55_bulk_transport(us,
DMA_FROM_DEVICE, buffer, len);
if (result != USB_STOR_XFER_GOOD) {
result = USB_STOR_TRANSPORT_ERROR;
goto leave;
}
/* now read status */
result = sddr55_bulk_transport(us,
DMA_FROM_DEVICE, status, 2);
if (result != USB_STOR_XFER_GOOD) {
result = USB_STOR_TRANSPORT_ERROR;
goto leave;
}
/* check status for error */
if (status[0] == 0xff && status[1] == 0x4) {
set_sense_info (3, 0x11, 0);
result = USB_STOR_TRANSPORT_FAILED;
goto leave;
}
}
// Store the data in the transfer buffer
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg, &offset, TO_XFER_BUF);
page = 0;
lba++;
sectors -= pages >> info->smallpageshift;
}
result = USB_STOR_TRANSPORT_GOOD;
leave:
kfree(buffer);
return result;
}
static int sddr55_write_data(struct us_data *us,
unsigned int lba,
unsigned int page,
unsigned short sectors) {
int result = USB_STOR_TRANSPORT_GOOD;
unsigned char *command = us->iobuf;
unsigned char *status = us->iobuf;
struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
unsigned char *buffer;
unsigned int pba;
unsigned int new_pba;
unsigned long address;
unsigned short pages;
int i;
unsigned int len, offset;
struct scatterlist *sg;
/* check if we are allowed to write */
if (info->read_only || info->force_read_only) {
set_sense_info (7, 0x27, 0); /* read only */
return USB_STOR_TRANSPORT_FAILED;
}
// Since we only write one block at a time, we have to create
// a bounce buffer and move the data a piece at a time between the
// bounce buffer and the actual transfer buffer.
len = min((unsigned int) sectors, (unsigned int) info->blocksize >>
info->smallpageshift) * PAGESIZE;
buffer = kmalloc(len, GFP_NOIO);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
offset = 0;
sg = NULL;
while (sectors > 0) {
/* have we got to end? */
if (lba >= info->max_log_blks)
break;
pba = info->lba_to_pba[lba];
// Write as many sectors as possible in this block
pages = min((unsigned int) sectors << info->smallpageshift,
info->blocksize - page);
len = pages << info->pageshift;
// Get the data from the transfer buffer
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg, &offset, FROM_XFER_BUF);
US_DEBUGP("Write %02X pages, to PBA %04X"
" (LBA %04X) page %02X\n",
pages, pba, lba, page);
command[4] = 0;
if (pba == NOT_ALLOCATED) {
/* no pba allocated for this lba, find a free pba to use */
int max_pba = (info->max_log_blks / 250 ) * 256;
int found_count = 0;
int found_pba = -1;
/* set pba to first block in zone lba is in */
pba = (lba / 1000) * 1024;
US_DEBUGP("No PBA for LBA %04X\n",lba);
if (max_pba > 1024)
max_pba = 1024;
/*
* Scan through the map looking for an unused block
* leave 16 unused blocks at start (or as many as
* possible) since the sddr55 seems to reuse a used
* block when it shouldn't if we don't leave space.
*/
for (i = 0; i < max_pba; i++, pba++) {
if (info->pba_to_lba[pba] == UNUSED_BLOCK) {
found_pba = pba;
if (found_count++ > 16)
break;
}
}
pba = found_pba;
if (pba == -1) {
/* oh dear */
US_DEBUGP("Couldn't find unallocated block\n");
set_sense_info (3, 0x31, 0); /* medium error */
result = USB_STOR_TRANSPORT_FAILED;
goto leave;
}
US_DEBUGP("Allocating PBA %04X for LBA %04X\n", pba, lba);
/* set writing to unallocated block flag */
command[4] = 0x40;
}
address = (pba << info->blockshift) + page;
command[1] = LSB_of(address>>16);
command[2] = LSB_of(address>>8);
command[3] = LSB_of(address);
/* set the lba into the command, modulo 1000 */
command[0] = LSB_of(lba % 1000);
command[6] = MSB_of(lba % 1000);
command[4] |= LSB_of(pages >> info->smallpageshift);
command[5] = 0xB0;
command[7] = 0x86;
/* send command */
result = sddr55_bulk_transport(us,
DMA_TO_DEVICE, command, 8);
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for send_command in write_data %d\n",
result);
/* set_sense_info is superfluous here? */
set_sense_info (3, 0x3, 0);/* peripheral write error */
result = USB_STOR_TRANSPORT_FAILED;
goto leave;
}
/* send the data */
result = sddr55_bulk_transport(us,
DMA_TO_DEVICE, buffer, len);
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for send_data in write_data %d\n",
result);
/* set_sense_info is superfluous here? */
set_sense_info (3, 0x3, 0);/* peripheral write error */
result = USB_STOR_TRANSPORT_FAILED;
goto leave;
}
/* now read status */
result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6);
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for get_status in write_data %d\n",
result);
/* set_sense_info is superfluous here? */
set_sense_info (3, 0x3, 0);/* peripheral write error */
result = USB_STOR_TRANSPORT_FAILED;
goto leave;
}
new_pba = (status[3] + (status[4] << 8) + (status[5] << 16))
>> info->blockshift;
/* check status for error */
if (status[0] == 0xff && status[1] == 0x4) {
info->pba_to_lba[new_pba] = BAD_BLOCK;
set_sense_info (3, 0x0c, 0);
result = USB_STOR_TRANSPORT_FAILED;
goto leave;
}
US_DEBUGP("Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n",
lba, pba, new_pba);
/* update the lba<->pba maps, note new_pba might be the same as pba */
info->lba_to_pba[lba] = new_pba;
info->pba_to_lba[pba] = UNUSED_BLOCK;
/* check that new_pba wasn't already being used */
if (info->pba_to_lba[new_pba] != UNUSED_BLOCK) {
printk(KERN_ERR "sddr55 error: new PBA %04X already in use for LBA %04X\n",
new_pba, info->pba_to_lba[new_pba]);
info->fatal_error = 1;
set_sense_info (3, 0x31, 0);
result = USB_STOR_TRANSPORT_FAILED;
goto leave;
}
/* update the pba<->lba maps for new_pba */
info->pba_to_lba[new_pba] = lba % 1000;
page = 0;
lba++;
sectors -= pages >> info->smallpageshift;
}
result = USB_STOR_TRANSPORT_GOOD;
leave:
kfree(buffer);
return result;
}
static int sddr55_read_deviceID(struct us_data *us,
unsigned char *manufacturerID,
unsigned char *deviceID) {
int result;
unsigned char *command = us->iobuf;
unsigned char *content = us->iobuf;
memset(command, 0, 8);
command[5] = 0xB0;
command[7] = 0x84;
result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8);
US_DEBUGP("Result of send_control for device ID is %d\n",
result);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
result = sddr55_bulk_transport(us,
DMA_FROM_DEVICE, content, 4);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
*manufacturerID = content[0];
*deviceID = content[1];
if (content[0] != 0xff) {
result = sddr55_bulk_transport(us,
DMA_FROM_DEVICE, content, 2);
}
return USB_STOR_TRANSPORT_GOOD;
}
int sddr55_reset(struct us_data *us) {
return 0;
}
static unsigned long sddr55_get_capacity(struct us_data *us) {
unsigned char manufacturerID;
unsigned char deviceID;
int result;
struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
US_DEBUGP("Reading capacity...\n");
result = sddr55_read_deviceID(us,
&manufacturerID,
&deviceID);
US_DEBUGP("Result of read_deviceID is %d\n",
result);
if (result != USB_STOR_XFER_GOOD)
return 0;
US_DEBUGP("Device ID = %02X\n", deviceID);
US_DEBUGP("Manuf ID = %02X\n", manufacturerID);
info->pageshift = 9;
info->smallpageshift = 0;
info->blocksize = 16;
info->blockshift = 4;
info->blockmask = 15;
switch (deviceID) {
case 0x6e: // 1MB
case 0xe8:
case 0xec:
info->pageshift = 8;
info->smallpageshift = 1;
return 0x00100000;
case 0xea: // 2MB
case 0x64:
info->pageshift = 8;
info->smallpageshift = 1;
case 0x5d: // 5d is a ROM card with pagesize 512.
return 0x00200000;
case 0xe3: // 4MB
case 0xe5:
case 0x6b:
case 0xd5:
return 0x00400000;
case 0xe6: // 8MB
case 0xd6:
return 0x00800000;
case 0x73: // 16MB
info->blocksize = 32;
info->blockshift = 5;
info->blockmask = 31;
return 0x01000000;
case 0x75: // 32MB
info->blocksize = 32;
info->blockshift = 5;
info->blockmask = 31;
return 0x02000000;
case 0x76: // 64MB
info->blocksize = 32;
info->blockshift = 5;
info->blockmask = 31;
return 0x04000000;
case 0x79: // 128MB
info->blocksize = 32;
info->blockshift = 5;
info->blockmask = 31;
return 0x08000000;
default: // unknown
return 0;
}
}
static int sddr55_read_map(struct us_data *us) {
struct sddr55_card_info *info = (struct sddr55_card_info *)(us->extra);
int numblocks;
unsigned char *buffer;
unsigned char *command = us->iobuf;
int i;
unsigned short lba;
unsigned short max_lba;
int result;
if (!info->capacity)
return -1;
numblocks = info->capacity >> (info->blockshift + info->pageshift);
buffer = kmalloc( numblocks * 2, GFP_NOIO );
if (!buffer)
return -1;
memset(command, 0, 8);
command[5] = 0xB0;
command[6] = numblocks * 2 / 256;
command[7] = 0x8A;
result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8);
if ( result != USB_STOR_XFER_GOOD) {
kfree (buffer);
return -1;
}
result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, buffer, numblocks * 2);
if ( result != USB_STOR_XFER_GOOD) {
kfree (buffer);
return -1;
}
result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, command, 2);
if ( result != USB_STOR_XFER_GOOD) {
kfree (buffer);
return -1;
}
kfree(info->lba_to_pba);
kfree(info->pba_to_lba);
info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
kfree(info->lba_to_pba);
kfree(info->pba_to_lba);
info->lba_to_pba = NULL;
info->pba_to_lba = NULL;
kfree(buffer);
return -1;
}
memset(info->lba_to_pba, 0xff, numblocks*sizeof(int));
memset(info->pba_to_lba, 0xff, numblocks*sizeof(int));
/* set maximum lba */
max_lba = info->max_log_blks;
if (max_lba > 1000)
max_lba = 1000;
// Each block is 64 bytes of control data, so block i is located in
// scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11)
for (i=0; i<numblocks; i++) {
int zone = i / 1024;
lba = short_pack(buffer[i * 2], buffer[i * 2 + 1]);
/* Every 1024 physical blocks ("zone"), the LBA numbers
* go back to zero, but are within a higher
* block of LBA's. Also, there is a maximum of
* 1000 LBA's per zone. In other words, in PBA
* 1024-2047 you will find LBA 0-999 which are
* really LBA 1000-1999. Yes, this wastes 24
* physical blocks per zone. Go figure.
* These devices can have blocks go bad, so there
* are 24 spare blocks to use when blocks do go bad.
*/
/* SDDR55 returns 0xffff for a bad block, and 0x400 for the
* CIS block. (Is this true for cards 8MB or less??)
* Record these in the physical to logical map
*/
info->pba_to_lba[i] = lba;
if (lba >= max_lba) {
continue;
}
if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED &&
!info->force_read_only) {
printk("sddr55: map inconsistency at LBA %04X\n", lba + zone * 1000);
info->force_read_only = 1;
}
if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF))
US_DEBUGP("LBA %04X <-> PBA %04X\n", lba, i);
info->lba_to_pba[lba + zone * 1000] = i;
}
kfree(buffer);
return 0;
}
static void sddr55_card_info_destructor(void *extra) {
struct sddr55_card_info *info = (struct sddr55_card_info *)extra;
if (!extra)
return;
kfree(info->lba_to_pba);
kfree(info->pba_to_lba);
}
/*
* Transport for the Sandisk SDDR-55
*/
int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
{
int result;
static unsigned char inquiry_response[8] = {
0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00
};
// write-protected for now, no block descriptor support
static unsigned char mode_page_01[20] = {
0x0, 0x12, 0x00, 0x80, 0x0, 0x0, 0x0, 0x0,
0x01, 0x0A,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
unsigned char *ptr = us->iobuf;
unsigned long capacity;
unsigned int lba;
unsigned int pba;
unsigned int page;
unsigned short pages;
struct sddr55_card_info *info;
if (!us->extra) {
us->extra = kzalloc(
sizeof(struct sddr55_card_info), GFP_NOIO);
if (!us->extra)
return USB_STOR_TRANSPORT_ERROR;
us->extra_destructor = sddr55_card_info_destructor;
}
info = (struct sddr55_card_info *)(us->extra);
if (srb->cmnd[0] == REQUEST_SENSE) {
US_DEBUGP("SDDR55: request sense %02x/%02x/%02x\n", info->sense_data[2], info->sense_data[12], info->sense_data[13]);
memcpy (ptr, info->sense_data, sizeof info->sense_data);
ptr[0] = 0x70;
ptr[7] = 11;
usb_stor_set_xfer_buf (ptr, sizeof info->sense_data, srb);
memset (info->sense_data, 0, sizeof info->sense_data);
return USB_STOR_TRANSPORT_GOOD;
}
memset (info->sense_data, 0, sizeof info->sense_data);
/* Dummy up a response for INQUIRY since SDDR55 doesn't
respond to INQUIRY commands */
if (srb->cmnd[0] == INQUIRY) {
memcpy(ptr, inquiry_response, 8);
fill_inquiry_response(us, ptr, 36);
return USB_STOR_TRANSPORT_GOOD;
}
/* only check card status if the map isn't allocated, ie no card seen yet
* or if it's been over half a second since we last accessed it
*/
if (info->lba_to_pba == NULL || time_after(jiffies, info->last_access + HZ/2)) {
/* check to see if a card is fitted */
result = sddr55_status (us);
if (result) {
result = sddr55_status (us);
if (!result) {
set_sense_info (6, 0x28, 0); /* new media, set unit attention, not ready to ready */
}
return USB_STOR_TRANSPORT_FAILED;
}
}
/* if we detected a problem with the map when writing,
don't allow any more access */
if (info->fatal_error) {
set_sense_info (3, 0x31, 0);
return USB_STOR_TRANSPORT_FAILED;
}
if (srb->cmnd[0] == READ_CAPACITY) {
capacity = sddr55_get_capacity(us);
if (!capacity) {
set_sense_info (3, 0x30, 0); /* incompatible medium */
return USB_STOR_TRANSPORT_FAILED;
}
info->capacity = capacity;
/* figure out the maximum logical block number, allowing for
* the fact that only 250 out of every 256 are used */
info->max_log_blks = ((info->capacity >> (info->pageshift + info->blockshift)) / 256) * 250;
/* Last page in the card, adjust as we only use 250 out of
* every 256 pages */
capacity = (capacity / 256) * 250;
capacity /= PAGESIZE;
capacity--;
((__be32 *) ptr)[0] = cpu_to_be32(capacity);
((__be32 *) ptr)[1] = cpu_to_be32(PAGESIZE);
usb_stor_set_xfer_buf(ptr, 8, srb);
sddr55_read_map(us);
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == MODE_SENSE_10) {
memcpy(ptr, mode_page_01, sizeof mode_page_01);
ptr[3] = (info->read_only || info->force_read_only) ? 0x80 : 0;
usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb);
if ( (srb->cmnd[2] & 0x3F) == 0x01 ) {
US_DEBUGP(
"SDDR55: Dummy up request for mode page 1\n");
return USB_STOR_TRANSPORT_GOOD;
} else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) {
US_DEBUGP(
"SDDR55: Dummy up request for all mode pages\n");
return USB_STOR_TRANSPORT_GOOD;
}
set_sense_info (5, 0x24, 0); /* invalid field in command */
return USB_STOR_TRANSPORT_FAILED;
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
US_DEBUGP(
"SDDR55: %s medium removal. Not that I can do"
" anything about it...\n",
(srb->cmnd[4]&0x03) ? "Prevent" : "Allow");
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == READ_10 || srb->cmnd[0] == WRITE_10) {
page = short_pack(srb->cmnd[3], srb->cmnd[2]);
page <<= 16;
page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
page <<= info->smallpageshift;
// convert page to block and page-within-block
lba = page >> info->blockshift;
page = page & info->blockmask;
// locate physical block corresponding to logical block
if (lba >= info->max_log_blks) {
US_DEBUGP("Error: Requested LBA %04X exceeds maximum "
"block %04X\n", lba, info->max_log_blks-1);
set_sense_info (5, 0x24, 0); /* invalid field in command */
return USB_STOR_TRANSPORT_FAILED;
}
pba = info->lba_to_pba[lba];
if (srb->cmnd[0] == WRITE_10) {
US_DEBUGP("WRITE_10: write block %04X (LBA %04X) page %01X"
" pages %d\n",
pba, lba, page, pages);
return sddr55_write_data(us, lba, page, pages);
} else {
US_DEBUGP("READ_10: read block %04X (LBA %04X) page %01X"
" pages %d\n",
pba, lba, page, pages);
return sddr55_read_data(us, lba, page, pages);
}
}
if (srb->cmnd[0] == TEST_UNIT_READY) {
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == START_STOP) {
return USB_STOR_TRANSPORT_GOOD;
}
set_sense_info (5, 0x20, 0); /* illegal command */
return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer?
}