linux/drivers/usb/dwc2
Antti Seppälä 95c8bc3609 usb: dwc2: Use platform endianness when accessing registers
This patch switches calls to readl/writel to their
dwc2_readl/dwc2_writel equivalents which preserve platform endianness.

This patch is necessary to access dwc2 registers correctly on big-endian
systems such as the mips based SoCs made by Lantiq. Then dwc2 can be
used to replace ifx-hcd driver for Lantiq platforms found e.g. in
OpenWrt.

The patch was autogenerated with the following commands:
$EDITOR core.h
sed -i "s/\<readl\>/dwc2_readl/g" *.c hcd.h hw.h
sed -i "s/\<writel\>/dwc2_writel/g" *.c hcd.h hw.h

Some files were then hand-edited to fix checkpatch.pl warnings about
too long lines.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27 10:54:31 -05:00
..
core.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
core.h usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
core_intr.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
debug.h usb: dwc2: move debugfs code to a separate file 2015-04-29 15:18:25 -05:00
debugfs.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
gadget.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hcd.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hcd.h usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hcd_ddma.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hcd_intr.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hcd_queue.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hw.h usb: dwc2: gadget: replace constants with defines 2015-01-30 10:34:11 -06:00
Kconfig usb: dwc2: remove dwc2_platform.ko 2015-04-29 15:20:11 -05:00
Makefile usb: dwc2: remove dwc2_platform.ko 2015-04-29 15:20:11 -05:00
pci.c usb: dwc2: pci: Add device mode to the dwc2-pci driver 2015-03-11 15:08:17 -05:00
platform.c usb: dwc2: rename all s3c_* to dwc2_* 2015-09-27 10:54:31 -05:00