linux/drivers/clk/bcm/clk-iproc-armpll.c
Ray Jui 5fe225c105 clk: iproc: add initial common clock support
This adds basic and generic support for various iProc PLLs and clocks
including the ARMPLL, GENPLL, LCPLL, MIPIPLL, and ASIU clocks.

SoCs under the iProc architecture can define their specific register
offsets and clock parameters for their PLL and clock controllers. These
parameters can be passed as arugments into the generic iProc PLL and
clock setup functions

Derived from code originally provided by Jonathan Richardson
<jonathar@broadcom.com>

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 12:36:38 -07:00

283 lines
7.5 KiB
C

/*
* Copyright (C) 2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/clkdev.h>
#include <linux/of_address.h>
#define IPROC_CLK_MAX_FREQ_POLICY 0x3
#define IPROC_CLK_POLICY_FREQ_OFFSET 0x008
#define IPROC_CLK_POLICY_FREQ_POLICY_FREQ_SHIFT 8
#define IPROC_CLK_POLICY_FREQ_POLICY_FREQ_MASK 0x7
#define IPROC_CLK_PLLARMA_OFFSET 0xc00
#define IPROC_CLK_PLLARMA_LOCK_SHIFT 28
#define IPROC_CLK_PLLARMA_PDIV_SHIFT 24
#define IPROC_CLK_PLLARMA_PDIV_MASK 0xf
#define IPROC_CLK_PLLARMA_NDIV_INT_SHIFT 8
#define IPROC_CLK_PLLARMA_NDIV_INT_MASK 0x3ff
#define IPROC_CLK_PLLARMB_OFFSET 0xc04
#define IPROC_CLK_PLLARMB_NDIV_FRAC_MASK 0xfffff
#define IPROC_CLK_PLLARMC_OFFSET 0xc08
#define IPROC_CLK_PLLARMC_BYPCLK_EN_SHIFT 8
#define IPROC_CLK_PLLARMC_MDIV_MASK 0xff
#define IPROC_CLK_PLLARMCTL5_OFFSET 0xc20
#define IPROC_CLK_PLLARMCTL5_H_MDIV_MASK 0xff
#define IPROC_CLK_PLLARM_OFFSET_OFFSET 0xc24
#define IPROC_CLK_PLLARM_SW_CTL_SHIFT 29
#define IPROC_CLK_PLLARM_NDIV_INT_OFFSET_SHIFT 20
#define IPROC_CLK_PLLARM_NDIV_INT_OFFSET_MASK 0xff
#define IPROC_CLK_PLLARM_NDIV_FRAC_OFFSET_MASK 0xfffff
#define IPROC_CLK_ARM_DIV_OFFSET 0xe00
#define IPROC_CLK_ARM_DIV_PLL_SELECT_OVERRIDE_SHIFT 4
#define IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK 0xf
#define IPROC_CLK_POLICY_DBG_OFFSET 0xec0
#define IPROC_CLK_POLICY_DBG_ACT_FREQ_SHIFT 12
#define IPROC_CLK_POLICY_DBG_ACT_FREQ_MASK 0x7
enum iproc_arm_pll_fid {
ARM_PLL_FID_CRYSTAL_CLK = 0,
ARM_PLL_FID_SYS_CLK = 2,
ARM_PLL_FID_CH0_SLOW_CLK = 6,
ARM_PLL_FID_CH1_FAST_CLK = 7
};
struct iproc_arm_pll {
struct clk_hw hw;
void __iomem *base;
unsigned long rate;
};
#define to_iproc_arm_pll(hw) container_of(hw, struct iproc_arm_pll, hw)
static unsigned int __get_fid(struct iproc_arm_pll *pll)
{
u32 val;
unsigned int policy, fid, active_fid;
val = readl(pll->base + IPROC_CLK_ARM_DIV_OFFSET);
if (val & (1 << IPROC_CLK_ARM_DIV_PLL_SELECT_OVERRIDE_SHIFT))
policy = val & IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK;
else
policy = 0;
/* something is seriously wrong */
BUG_ON(policy > IPROC_CLK_MAX_FREQ_POLICY);
val = readl(pll->base + IPROC_CLK_POLICY_FREQ_OFFSET);
fid = (val >> (IPROC_CLK_POLICY_FREQ_POLICY_FREQ_SHIFT * policy)) &
IPROC_CLK_POLICY_FREQ_POLICY_FREQ_MASK;
val = readl(pll->base + IPROC_CLK_POLICY_DBG_OFFSET);
active_fid = IPROC_CLK_POLICY_DBG_ACT_FREQ_MASK &
(val >> IPROC_CLK_POLICY_DBG_ACT_FREQ_SHIFT);
if (fid != active_fid) {
pr_debug("%s: fid override %u->%u\n", __func__, fid,
active_fid);
fid = active_fid;
}
pr_debug("%s: active fid: %u\n", __func__, fid);
return fid;
}
/*
* Determine the mdiv (post divider) based on the frequency ID being used.
* There are 4 sources that can be used to derive the output clock rate:
* - 25 MHz Crystal
* - System clock
* - PLL channel 0 (slow clock)
* - PLL channel 1 (fast clock)
*/
static int __get_mdiv(struct iproc_arm_pll *pll)
{
unsigned int fid;
int mdiv;
u32 val;
fid = __get_fid(pll);
switch (fid) {
case ARM_PLL_FID_CRYSTAL_CLK:
case ARM_PLL_FID_SYS_CLK:
mdiv = 1;
break;
case ARM_PLL_FID_CH0_SLOW_CLK:
val = readl(pll->base + IPROC_CLK_PLLARMC_OFFSET);
mdiv = val & IPROC_CLK_PLLARMC_MDIV_MASK;
if (mdiv == 0)
mdiv = 256;
break;
case ARM_PLL_FID_CH1_FAST_CLK:
val = readl(pll->base + IPROC_CLK_PLLARMCTL5_OFFSET);
mdiv = val & IPROC_CLK_PLLARMCTL5_H_MDIV_MASK;
if (mdiv == 0)
mdiv = 256;
break;
default:
mdiv = -EFAULT;
}
return mdiv;
}
static unsigned int __get_ndiv(struct iproc_arm_pll *pll)
{
u32 val;
unsigned int ndiv_int, ndiv_frac, ndiv;
val = readl(pll->base + IPROC_CLK_PLLARM_OFFSET_OFFSET);
if (val & (1 << IPROC_CLK_PLLARM_SW_CTL_SHIFT)) {
/*
* offset mode is active. Read the ndiv from the PLLARM OFFSET
* register
*/
ndiv_int = (val >> IPROC_CLK_PLLARM_NDIV_INT_OFFSET_SHIFT) &
IPROC_CLK_PLLARM_NDIV_INT_OFFSET_MASK;
if (ndiv_int == 0)
ndiv_int = 256;
ndiv_frac = val & IPROC_CLK_PLLARM_NDIV_FRAC_OFFSET_MASK;
} else {
/* offset mode not active */
val = readl(pll->base + IPROC_CLK_PLLARMA_OFFSET);
ndiv_int = (val >> IPROC_CLK_PLLARMA_NDIV_INT_SHIFT) &
IPROC_CLK_PLLARMA_NDIV_INT_MASK;
if (ndiv_int == 0)
ndiv_int = 1024;
val = readl(pll->base + IPROC_CLK_PLLARMB_OFFSET);
ndiv_frac = val & IPROC_CLK_PLLARMB_NDIV_FRAC_MASK;
}
ndiv = (ndiv_int << 20) | ndiv_frac;
return ndiv;
}
/*
* The output frequency of the ARM PLL is calculated based on the ARM PLL
* divider values:
* pdiv = ARM PLL pre-divider
* ndiv = ARM PLL multiplier
* mdiv = ARM PLL post divider
*
* The frequency is calculated by:
* ((ndiv * parent clock rate) / pdiv) / mdiv
*/
static unsigned long iproc_arm_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct iproc_arm_pll *pll = to_iproc_arm_pll(hw);
u32 val;
int mdiv;
u64 ndiv;
unsigned int pdiv;
/* in bypass mode, use parent rate */
val = readl(pll->base + IPROC_CLK_PLLARMC_OFFSET);
if (val & (1 << IPROC_CLK_PLLARMC_BYPCLK_EN_SHIFT)) {
pll->rate = parent_rate;
return pll->rate;
}
/* PLL needs to be locked */
val = readl(pll->base + IPROC_CLK_PLLARMA_OFFSET);
if (!(val & (1 << IPROC_CLK_PLLARMA_LOCK_SHIFT))) {
pll->rate = 0;
return 0;
}
pdiv = (val >> IPROC_CLK_PLLARMA_PDIV_SHIFT) &
IPROC_CLK_PLLARMA_PDIV_MASK;
if (pdiv == 0)
pdiv = 16;
ndiv = __get_ndiv(pll);
mdiv = __get_mdiv(pll);
if (mdiv <= 0) {
pll->rate = 0;
return 0;
}
pll->rate = (ndiv * parent_rate) >> 20;
pll->rate = (pll->rate / pdiv) / mdiv;
pr_debug("%s: ARM PLL rate: %lu. parent rate: %lu\n", __func__,
pll->rate, parent_rate);
pr_debug("%s: ndiv_int: %u, pdiv: %u, mdiv: %d\n", __func__,
(unsigned int)(ndiv >> 20), pdiv, mdiv);
return pll->rate;
}
static const struct clk_ops iproc_arm_pll_ops = {
.recalc_rate = iproc_arm_pll_recalc_rate,
};
void __init iproc_armpll_setup(struct device_node *node)
{
int ret;
struct clk *clk;
struct iproc_arm_pll *pll;
struct clk_init_data init;
const char *parent_name;
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (WARN_ON(!pll))
return;
pll->base = of_iomap(node, 0);
if (WARN_ON(!pll->base))
goto err_free_pll;
init.name = node->name;
init.ops = &iproc_arm_pll_ops;
init.flags = 0;
parent_name = of_clk_get_parent_name(node, 0);
init.parent_names = (parent_name ? &parent_name : NULL);
init.num_parents = (parent_name ? 1 : 0);
pll->hw.init = &init;
clk = clk_register(NULL, &pll->hw);
if (WARN_ON(IS_ERR(clk)))
goto err_iounmap;
ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
if (WARN_ON(ret))
goto err_clk_unregister;
return;
err_clk_unregister:
clk_unregister(clk);
err_iounmap:
iounmap(pll->base);
err_free_pll:
kfree(pll);
}