linux/net/sunrpc/xprtrdma/transport.c

/*
 * Copyright (c) 2003-2007 Network Appliance, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the BSD-type
 * license below:
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *      Redistributions of source code must retain the above copyright
 *      notice, this list of conditions and the following disclaimer.
 *
 *      Redistributions in binary form must reproduce the above
 *      copyright notice, this list of conditions and the following
 *      disclaimer in the documentation and/or other materials provided
 *      with the distribution.
 *
 *      Neither the name of the Network Appliance, Inc. nor the names of
 *      its contributors may be used to endorse or promote products
 *      derived from this software without specific prior written
 *      permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * transport.c
 *
 * This file contains the top-level implementation of an RPC RDMA
 * transport.
 *
 * Naming convention: functions beginning with xprt_ are part of the
 * transport switch. All others are RPC RDMA internal.
 */

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/sunrpc/addr.h>

#include "xprt_rdma.h"

#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
# define RPCDBG_FACILITY	RPCDBG_TRANS
#endif

/*
 * tunables
 */

static unsigned int xprt_rdma_slot_table_entries = RPCRDMA_DEF_SLOT_TABLE;
unsigned int xprt_rdma_max_inline_read = RPCRDMA_DEF_INLINE;
static unsigned int xprt_rdma_max_inline_write = RPCRDMA_DEF_INLINE;
static unsigned int xprt_rdma_inline_write_padding;
static unsigned int xprt_rdma_memreg_strategy = RPCRDMA_FRMR;
		int xprt_rdma_pad_optimize = 1;

#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)

static unsigned int min_slot_table_size = RPCRDMA_MIN_SLOT_TABLE;
static unsigned int max_slot_table_size = RPCRDMA_MAX_SLOT_TABLE;
static unsigned int min_inline_size = RPCRDMA_MIN_INLINE;
static unsigned int max_inline_size = RPCRDMA_MAX_INLINE;
static unsigned int zero;
static unsigned int max_padding = PAGE_SIZE;
static unsigned int min_memreg = RPCRDMA_BOUNCEBUFFERS;
static unsigned int max_memreg = RPCRDMA_LAST - 1;

static struct ctl_table_header *sunrpc_table_header;

static struct ctl_table xr_tunables_table[] = {
	{
		.procname	= "rdma_slot_table_entries",
		.data		= &xprt_rdma_slot_table_entries,
		.maxlen		= sizeof(unsigned int),
		.mode		= 0644,
		.proc_handler	= proc_dointvec_minmax,
		.extra1		= &min_slot_table_size,
		.extra2		= &max_slot_table_size
	},
	{
		.procname	= "rdma_max_inline_read",
		.data		= &xprt_rdma_max_inline_read,
		.maxlen		= sizeof(unsigned int),
		.mode		= 0644,
		.proc_handler	= proc_dointvec,
		.extra1		= &min_inline_size,
		.extra2		= &max_inline_size,
	},
	{
		.procname	= "rdma_max_inline_write",
		.data		= &xprt_rdma_max_inline_write,
		.maxlen		= sizeof(unsigned int),
		.mode		= 0644,
		.proc_handler	= proc_dointvec,
		.extra1		= &min_inline_size,
		.extra2		= &max_inline_size,
	},
	{
		.procname	= "rdma_inline_write_padding",
		.data		= &xprt_rdma_inline_write_padding,
		.maxlen		= sizeof(unsigned int),
		.mode		= 0644,
		.proc_handler	= proc_dointvec_minmax,
		.extra1		= &zero,
		.extra2		= &max_padding,
	},
	{
		.procname	= "rdma_memreg_strategy",
		.data		= &xprt_rdma_memreg_strategy,
		.maxlen		= sizeof(unsigned int),
		.mode		= 0644,
		.proc_handler	= proc_dointvec_minmax,
		.extra1		= &min_memreg,
		.extra2		= &max_memreg,
	},
	{
		.procname	= "rdma_pad_optimize",
		.data		= &xprt_rdma_pad_optimize,
		.maxlen		= sizeof(unsigned int),
		.mode		= 0644,
		.proc_handler	= proc_dointvec,
	},
	{ },
};

static struct ctl_table sunrpc_table[] = {
	{
		.procname	= "sunrpc",
		.mode		= 0555,
		.child		= xr_tunables_table
	},
	{ },
};

#endif

static struct rpc_xprt_ops xprt_rdma_procs;	/*forward reference */

static void
xprt_rdma_format_addresses4(struct rpc_xprt *xprt, struct sockaddr *sap)
{
	struct sockaddr_in *sin = (struct sockaddr_in *)sap;
	char buf[20];

	snprintf(buf, sizeof(buf), "%08x", ntohl(sin->sin_addr.s_addr));
	xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);

	xprt->address_strings[RPC_DISPLAY_NETID] = RPCBIND_NETID_RDMA;
}

static void
xprt_rdma_format_addresses6(struct rpc_xprt *xprt, struct sockaddr *sap)
{
	struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
	char buf[40];

	snprintf(buf, sizeof(buf), "%pi6", &sin6->sin6_addr);
	xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);

	xprt->address_strings[RPC_DISPLAY_NETID] = RPCBIND_NETID_RDMA6;
}

void
xprt_rdma_format_addresses(struct rpc_xprt *xprt, struct sockaddr *sap)
{
	char buf[128];

	switch (sap->sa_family) {
	case AF_INET:
		xprt_rdma_format_addresses4(xprt, sap);
		break;
	case AF_INET6:
		xprt_rdma_format_addresses6(xprt, sap);
		break;
	default:
		pr_err("rpcrdma: Unrecognized address family\n");
		return;
	}

	(void)rpc_ntop(sap, buf, sizeof(buf));
	xprt->address_strings[RPC_DISPLAY_ADDR] = kstrdup(buf, GFP_KERNEL);

	snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
	xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);

	snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
	xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);

	xprt->address_strings[RPC_DISPLAY_PROTO] = "rdma";
}

void
xprt_rdma_free_addresses(struct rpc_xprt *xprt)
{
	unsigned int i;

	for (i = 0; i < RPC_DISPLAY_MAX; i++)
		switch (i) {
		case RPC_DISPLAY_PROTO:
		case RPC_DISPLAY_NETID:
			continue;
		default:
			kfree(xprt->address_strings[i]);
		}
}

static void
xprt_rdma_connect_worker(struct work_struct *work)
{
	struct rpcrdma_xprt *r_xprt = container_of(work, struct rpcrdma_xprt,
						   rx_connect_worker.work);
	struct rpc_xprt *xprt = &r_xprt->rx_xprt;
	int rc = 0;

	xprt_clear_connected(xprt);

	dprintk("RPC:       %s: %sconnect\n", __func__,
			r_xprt->rx_ep.rep_connected != 0 ? "re" : "");
	rc = rpcrdma_ep_connect(&r_xprt->rx_ep, &r_xprt->rx_ia);
	if (rc)
		xprt_wake_pending_tasks(xprt, rc);

	dprintk("RPC:       %s: exit\n", __func__);
	xprt_clear_connecting(xprt);
}

static void
xprt_rdma_inject_disconnect(struct rpc_xprt *xprt)
{
	struct rpcrdma_xprt *r_xprt = container_of(xprt, struct rpcrdma_xprt,
						   rx_xprt);

	pr_info("rpcrdma: injecting transport disconnect on xprt=%p\n", xprt);
	rdma_disconnect(r_xprt->rx_ia.ri_id);
}

/*
 * xprt_rdma_destroy
 *
 * Destroy the xprt.
 * Free all memory associated with the object, including its own.
 * NOTE: none of the *destroy methods free memory for their top-level
 * objects, even though they may have allocated it (they do free
 * private memory). It's up to the caller to handle it. In this
 * case (RDMA transport), all structure memory is inlined with the
 * struct rpcrdma_xprt.
 */
static void
xprt_rdma_destroy(struct rpc_xprt *xprt)
{
	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);

	dprintk("RPC:       %s: called\n", __func__);

	cancel_delayed_work_sync(&r_xprt->rx_connect_worker);

	xprt_clear_connected(xprt);

	rpcrdma_ep_destroy(&r_xprt->rx_ep, &r_xprt->rx_ia);
	rpcrdma_buffer_destroy(&r_xprt->rx_buf);
	rpcrdma_ia_close(&r_xprt->rx_ia);

	xprt_rdma_free_addresses(xprt);

	xprt_free(xprt);

	dprintk("RPC:       %s: returning\n", __func__);

	module_put(THIS_MODULE);
}

static const struct rpc_timeout xprt_rdma_default_timeout = {
	.to_initval = 60 * HZ,
	.to_maxval = 60 * HZ,
};

/**
 * xprt_setup_rdma - Set up transport to use RDMA
 *
 * @args: rpc transport arguments
 */
static struct rpc_xprt *
xprt_setup_rdma(struct xprt_create *args)
{
	struct rpcrdma_create_data_internal cdata;
	struct rpc_xprt *xprt;
	struct rpcrdma_xprt *new_xprt;
	struct rpcrdma_ep *new_ep;
	struct sockaddr *sap;
	int rc;

	if (args->addrlen > sizeof(xprt->addr)) {
		dprintk("RPC:       %s: address too large\n", __func__);
		return ERR_PTR(-EBADF);
	}

	xprt = xprt_alloc(args->net, sizeof(struct rpcrdma_xprt),
			xprt_rdma_slot_table_entries,
			xprt_rdma_slot_table_entries);
	if (xprt == NULL) {
		dprintk("RPC:       %s: couldn't allocate rpcrdma_xprt\n",
			__func__);
		return ERR_PTR(-ENOMEM);
	}

	/* 60 second timeout, no retries */
	xprt->timeout = &xprt_rdma_default_timeout;
	xprt->bind_timeout = RPCRDMA_BIND_TO;
	xprt->reestablish_timeout = RPCRDMA_INIT_REEST_TO;
	xprt->idle_timeout = RPCRDMA_IDLE_DISC_TO;

	xprt->resvport = 0;		/* privileged port not needed */
	xprt->tsh_size = 0;		/* RPC-RDMA handles framing */
	xprt->ops = &xprt_rdma_procs;

	/*
	 * Set up RDMA-specific connect data.
	 */

	sap = (struct sockaddr *)&cdata.addr;
	memcpy(sap, args->dstaddr, args->addrlen);

	/* Ensure xprt->addr holds valid server TCP (not RDMA)
	 * address, for any side protocols which peek at it */
	xprt->prot = IPPROTO_TCP;
	xprt->addrlen = args->addrlen;
	memcpy(&xprt->addr, sap, xprt->addrlen);

	if (rpc_get_port(sap))
		xprt_set_bound(xprt);

	cdata.max_requests = xprt->max_reqs;

	cdata.rsize = RPCRDMA_MAX_SEGS * PAGE_SIZE; /* RDMA write max */
	cdata.wsize = RPCRDMA_MAX_SEGS * PAGE_SIZE; /* RDMA read max */

	cdata.inline_wsize = xprt_rdma_max_inline_write;
	if (cdata.inline_wsize > cdata.wsize)
		cdata.inline_wsize = cdata.wsize;

	cdata.inline_rsize = xprt_rdma_max_inline_read;
	if (cdata.inline_rsize > cdata.rsize)
		cdata.inline_rsize = cdata.rsize;

	cdata.padding = xprt_rdma_inline_write_padding;

	/*
	 * Create new transport instance, which includes initialized
	 *  o ia
	 *  o endpoint
	 *  o buffers
	 */

	new_xprt = rpcx_to_rdmax(xprt);

	rc = rpcrdma_ia_open(new_xprt, sap, xprt_rdma_memreg_strategy);
	if (rc)
		goto out1;

	/*
	 * initialize and create ep
	 */
	new_xprt->rx_data = cdata;
	new_ep = &new_xprt->rx_ep;
	new_ep->rep_remote_addr = cdata.addr;

	rc = rpcrdma_ep_create(&new_xprt->rx_ep,
				&new_xprt->rx_ia, &new_xprt->rx_data);
	if (rc)
		goto out2;

	/*
	 * Allocate pre-registered send and receive buffers for headers and
	 * any inline data. Also specify any padding which will be provided
	 * from a preregistered zero buffer.
	 */
	rc = rpcrdma_buffer_create(new_xprt);
	if (rc)
		goto out3;

	/*
	 * Register a callback for connection events. This is necessary because
	 * connection loss notification is async. We also catch connection loss
	 * when reaping receives.
	 */
	INIT_DELAYED_WORK(&new_xprt->rx_connect_worker,
			  xprt_rdma_connect_worker);

	xprt_rdma_format_addresses(xprt, sap);
	xprt->max_payload = new_xprt->rx_ia.ri_ops->ro_maxpages(new_xprt);
	if (xprt->max_payload == 0)
		goto out4;
	xprt->max_payload <<= PAGE_SHIFT;
	dprintk("RPC:       %s: transport data payload maximum: %zu bytes\n",
		__func__, xprt->max_payload);

	if (!try_module_get(THIS_MODULE))
		goto out4;

	dprintk("RPC:       %s: %s:%s\n", __func__,
		xprt->address_strings[RPC_DISPLAY_ADDR],
		xprt->address_strings[RPC_DISPLAY_PORT]);
	return xprt;

out4:
	xprt_rdma_free_addresses(xprt);
	rc = -EINVAL;
out3:
	rpcrdma_ep_destroy(new_ep, &new_xprt->rx_ia);
out2:
	rpcrdma_ia_close(&new_xprt->rx_ia);
out1:
	xprt_free(xprt);
	return ERR_PTR(rc);
}

/*
 * Close a connection, during shutdown or timeout/reconnect
 */
static void
xprt_rdma_close(struct rpc_xprt *xprt)
{
	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);

	dprintk("RPC:       %s: closing\n", __func__);
	if (r_xprt->rx_ep.rep_connected > 0)
		xprt->reestablish_timeout = 0;
	xprt_disconnect_done(xprt);
	rpcrdma_ep_disconnect(&r_xprt->rx_ep, &r_xprt->rx_ia);
}

static void
xprt_rdma_set_port(struct rpc_xprt *xprt, u16 port)
{
	struct sockaddr_in *sap;

	sap = (struct sockaddr_in *)&xprt->addr;
	sap->sin_port = htons(port);
	sap = (struct sockaddr_in *)&rpcx_to_rdmad(xprt).addr;
	sap->sin_port = htons(port);
	dprintk("RPC:       %s: %u\n", __func__, port);
}

static void
xprt_rdma_connect(struct rpc_xprt *xprt, struct rpc_task *task)
{
	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);

	if (r_xprt->rx_ep.rep_connected != 0) {
		/* Reconnect */
		schedule_delayed_work(&r_xprt->rx_connect_worker,
				      xprt->reestablish_timeout);
		xprt->reestablish_timeout <<= 1;
		if (xprt->reestablish_timeout > RPCRDMA_MAX_REEST_TO)
			xprt->reestablish_timeout = RPCRDMA_MAX_REEST_TO;
		else if (xprt->reestablish_timeout < RPCRDMA_INIT_REEST_TO)
			xprt->reestablish_timeout = RPCRDMA_INIT_REEST_TO;
	} else {
		schedule_delayed_work(&r_xprt->rx_connect_worker, 0);
		if (!RPC_IS_ASYNC(task))
			flush_delayed_work(&r_xprt->rx_connect_worker);
	}
}

/*
 * The RDMA allocate/free functions need the task structure as a place
 * to hide the struct rpcrdma_req, which is necessary for the actual send/recv
 * sequence.
 *
 * The RPC layer allocates both send and receive buffers in the same call
 * (rq_send_buf and rq_rcv_buf are both part of a single contiguous buffer).
 * We may register rq_rcv_buf when using reply chunks.
 */
static void *
xprt_rdma_allocate(struct rpc_task *task, size_t size)
{
	struct rpc_xprt *xprt = task->tk_rqstp->rq_xprt;
	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
	struct rpcrdma_regbuf *rb;
	struct rpcrdma_req *req;
	size_t min_size;
	gfp_t flags;

	req = rpcrdma_buffer_get(&r_xprt->rx_buf);
	if (req == NULL)
		return NULL;

	flags = RPCRDMA_DEF_GFP;
	if (RPC_IS_SWAPPER(task))
		flags = __GFP_MEMALLOC | GFP_NOWAIT | __GFP_NOWARN;

	if (req->rl_rdmabuf == NULL)
		goto out_rdmabuf;
	if (req->rl_sendbuf == NULL)
		goto out_sendbuf;
	if (size > req->rl_sendbuf->rg_size)
		goto out_sendbuf;

out:
	dprintk("RPC:       %s: size %zd, request 0x%p\n", __func__, size, req);
	req->rl_connect_cookie = 0;	/* our reserved value */
	return req->rl_sendbuf->rg_base;

out_rdmabuf:
	min_size = RPCRDMA_INLINE_WRITE_THRESHOLD(task->tk_rqstp);
	rb = rpcrdma_alloc_regbuf(&r_xprt->rx_ia, min_size, flags);
	if (IS_ERR(rb))
		goto out_fail;
	req->rl_rdmabuf = rb;

out_sendbuf:
	/* XDR encoding and RPC/RDMA marshaling of this request has not
	 * yet occurred. Thus a lower bound is needed to prevent buffer
	 * overrun during marshaling.
	 *
	 * RPC/RDMA marshaling may choose to send payload bearing ops
	 * inline, if the result is smaller than the inline threshold.
	 * The value of the "size" argument accounts for header
	 * requirements but not for the payload in these cases.
	 *
	 * Likewise, allocate enough space to receive a reply up to the
	 * size of the inline threshold.
	 *
	 * It's unlikely that both the send header and the received
	 * reply will be large, but slush is provided here to allow
	 * flexibility when marshaling.
	 */
	min_size = RPCRDMA_INLINE_READ_THRESHOLD(task->tk_rqstp);
	min_size += RPCRDMA_INLINE_WRITE_THRESHOLD(task->tk_rqstp);
	if (size < min_size)
		size = min_size;

	rb = rpcrdma_alloc_regbuf(&r_xprt->rx_ia, size, flags);
	if (IS_ERR(rb))
		goto out_fail;
	rb->rg_owner = req;

	r_xprt->rx_stats.hardway_register_count += size;
	rpcrdma_free_regbuf(&r_xprt->rx_ia, req->rl_sendbuf);
	req->rl_sendbuf = rb;
	goto out;

out_fail:
	rpcrdma_buffer_put(req);
	r_xprt->rx_stats.failed_marshal_count++;
	return NULL;
}

/*
 * This function returns all RDMA resources to the pool.
 */
static void
xprt_rdma_free(void *buffer)
{
	struct rpcrdma_req *req;
	struct rpcrdma_xprt *r_xprt;
	struct rpcrdma_regbuf *rb;
	int i;

	if (buffer == NULL)
		return;

	rb = container_of(buffer, struct rpcrdma_regbuf, rg_base[0]);
	req = rb->rg_owner;
	if (req->rl_backchannel)
		return;

	r_xprt = container_of(req->rl_buffer, struct rpcrdma_xprt, rx_buf);

	dprintk("RPC:       %s: called on 0x%p\n", __func__, req->rl_reply);

	for (i = 0; req->rl_nchunks;) {
		--req->rl_nchunks;
		i += r_xprt->rx_ia.ri_ops->ro_unmap(r_xprt,
						    &req->rl_segments[i]);
	}

	rpcrdma_buffer_put(req);
}

/*
 * send_request invokes the meat of RPC RDMA. It must do the following:
 *  1.  Marshal the RPC request into an RPC RDMA request, which means
 *	putting a header in front of data, and creating IOVs for RDMA
 *	from those in the request.
 *  2.  In marshaling, detect opportunities for RDMA, and use them.
 *  3.  Post a recv message to set up asynch completion, then send
 *	the request (rpcrdma_ep_post).
 *  4.  No partial sends are possible in the RPC-RDMA protocol (as in UDP).
 */

static int
xprt_rdma_send_request(struct rpc_task *task)
{
	struct rpc_rqst *rqst = task->tk_rqstp;
	struct rpc_xprt *xprt = rqst->rq_xprt;
	struct rpcrdma_req *req = rpcr_to_rdmar(rqst);
	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
	int rc = 0;

	rc = rpcrdma_marshal_req(rqst);
	if (rc < 0)
		goto failed_marshal;

	if (req->rl_reply == NULL) 		/* e.g. reconnection */
		rpcrdma_recv_buffer_get(req);

	/* Must suppress retransmit to maintain credits */
	if (req->rl_connect_cookie == xprt->connect_cookie)
		goto drop_connection;
	req->rl_connect_cookie = xprt->connect_cookie;

	if (rpcrdma_ep_post(&r_xprt->rx_ia, &r_xprt->rx_ep, req))
		goto drop_connection;

	rqst->rq_xmit_bytes_sent += rqst->rq_snd_buf.len;
	rqst->rq_bytes_sent = 0;
	return 0;

failed_marshal:
	r_xprt->rx_stats.failed_marshal_count++;
	dprintk("RPC:       %s: rpcrdma_marshal_req failed, status %i\n",
		__func__, rc);
	if (rc == -EIO)
		return -EIO;
drop_connection:
	xprt_disconnect_done(xprt);
	return -ENOTCONN;	/* implies disconnect */
}

void xprt_rdma_print_stats(struct rpc_xprt *xprt, struct seq_file *seq)
{
	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
	long idle_time = 0;

	if (xprt_connected(xprt))
		idle_time = (long)(jiffies - xprt->last_used) / HZ;

	seq_puts(seq, "\txprt:\trdma ");
	seq_printf(seq, "%u %lu %lu %lu %ld %lu %lu %lu %llu %llu ",
		   0,	/* need a local port? */
		   xprt->stat.bind_count,
		   xprt->stat.connect_count,
		   xprt->stat.connect_time,
		   idle_time,
		   xprt->stat.sends,
		   xprt->stat.recvs,
		   xprt->stat.bad_xids,
		   xprt->stat.req_u,
		   xprt->stat.bklog_u);
	seq_printf(seq, "%lu %lu %lu %llu %llu %llu %llu %lu %lu %lu %lu\n",
		   r_xprt->rx_stats.read_chunk_count,
		   r_xprt->rx_stats.write_chunk_count,
		   r_xprt->rx_stats.reply_chunk_count,
		   r_xprt->rx_stats.total_rdma_request,
		   r_xprt->rx_stats.total_rdma_reply,
		   r_xprt->rx_stats.pullup_copy_count,
		   r_xprt->rx_stats.fixup_copy_count,
		   r_xprt->rx_stats.hardway_register_count,
		   r_xprt->rx_stats.failed_marshal_count,
		   r_xprt->rx_stats.bad_reply_count,
		   r_xprt->rx_stats.nomsg_call_count);
}

static int
xprt_rdma_enable_swap(struct rpc_xprt *xprt)
{
	return 0;
}

static void
xprt_rdma_disable_swap(struct rpc_xprt *xprt)
{
}

/*
 * Plumbing for rpc transport switch and kernel module
 */

static struct rpc_xprt_ops xprt_rdma_procs = {
	.reserve_xprt		= xprt_reserve_xprt_cong,
	.release_xprt		= xprt_release_xprt_cong, /* sunrpc/xprt.c */
	.alloc_slot		= xprt_alloc_slot,
	.release_request	= xprt_release_rqst_cong,       /* ditto */
	.set_retrans_timeout	= xprt_set_retrans_timeout_def, /* ditto */
	.rpcbind		= rpcb_getport_async,	/* sunrpc/rpcb_clnt.c */
	.set_port		= xprt_rdma_set_port,
	.connect		= xprt_rdma_connect,
	.buf_alloc		= xprt_rdma_allocate,
	.buf_free		= xprt_rdma_free,
	.send_request		= xprt_rdma_send_request,
	.close			= xprt_rdma_close,
	.destroy		= xprt_rdma_destroy,
	.print_stats		= xprt_rdma_print_stats,
	.enable_swap		= xprt_rdma_enable_swap,
	.disable_swap		= xprt_rdma_disable_swap,
	.inject_disconnect	= xprt_rdma_inject_disconnect,
#if defined(CONFIG_SUNRPC_BACKCHANNEL)
	.bc_setup		= xprt_rdma_bc_setup,
	.bc_up			= xprt_rdma_bc_up,
	.bc_maxpayload		= xprt_rdma_bc_maxpayload,
	.bc_free_rqst		= xprt_rdma_bc_free_rqst,
	.bc_destroy		= xprt_rdma_bc_destroy,
#endif
};

static struct xprt_class xprt_rdma = {
	.list			= LIST_HEAD_INIT(xprt_rdma.list),
	.name			= "rdma",
	.owner			= THIS_MODULE,
	.ident			= XPRT_TRANSPORT_RDMA,
	.setup			= xprt_setup_rdma,
};

void xprt_rdma_cleanup(void)
{
	int rc;

	dprintk("RPCRDMA Module Removed, deregister RPC RDMA transport\n");
#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
	if (sunrpc_table_header) {
		unregister_sysctl_table(sunrpc_table_header);
		sunrpc_table_header = NULL;
	}
#endif
	rc = xprt_unregister_transport(&xprt_rdma);
	if (rc)
		dprintk("RPC:       %s: xprt_unregister returned %i\n",
			__func__, rc);

	rpcrdma_destroy_wq();
	frwr_destroy_recovery_wq();

	rc = xprt_unregister_transport(&xprt_rdma_bc);
	if (rc)
		dprintk("RPC:       %s: xprt_unregister(bc) returned %i\n",
			__func__, rc);
}

int xprt_rdma_init(void)
{
	int rc;

	rc = frwr_alloc_recovery_wq();
	if (rc)
		return rc;

	rc = rpcrdma_alloc_wq();
	if (rc) {
		frwr_destroy_recovery_wq();
		return rc;
	}

	rc = xprt_register_transport(&xprt_rdma);
	if (rc) {
		rpcrdma_destroy_wq();
		frwr_destroy_recovery_wq();
		return rc;
	}

	rc = xprt_register_transport(&xprt_rdma_bc);
	if (rc) {
		xprt_unregister_transport(&xprt_rdma);
		rpcrdma_destroy_wq();
		frwr_destroy_recovery_wq();
		return rc;
	}

	dprintk("RPCRDMA Module Init, register RPC RDMA transport\n");

	dprintk("Defaults:\n");
	dprintk("\tSlots %d\n"
		"\tMaxInlineRead %d\n\tMaxInlineWrite %d\n",
		xprt_rdma_slot_table_entries,
		xprt_rdma_max_inline_read, xprt_rdma_max_inline_write);
	dprintk("\tPadding %d\n\tMemreg %d\n",
		xprt_rdma_inline_write_padding, xprt_rdma_memreg_strategy);

#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
	if (!sunrpc_table_header)
		sunrpc_table_header = register_sysctl_table(sunrpc_table);
#endif
	return 0;
}