linux/drivers/iio/gyro/adis16080.c
Jonathan Cameron 227e8ef81d iio:gyro: drop assign iio_info.driver_module and iio_trigger_ops.owner
The equivalent of both of these are now done via macro magic when
the relevant register calls are made.  The actual structure
elements will shortly go away.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-22 21:28:56 +01:00

240 lines
5.4 KiB
C

/*
* ADIS16080/100 Yaw Rate Gyroscope with SPI driver
*
* Copyright 2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define ADIS16080_DIN_GYRO (0 << 10) /* Gyroscope output */
#define ADIS16080_DIN_TEMP (1 << 10) /* Temperature output */
#define ADIS16080_DIN_AIN1 (2 << 10)
#define ADIS16080_DIN_AIN2 (3 << 10)
/*
* 1: Write contents on DIN to control register.
* 0: No changes to control register.
*/
#define ADIS16080_DIN_WRITE (1 << 15)
struct adis16080_chip_info {
int scale_val;
int scale_val2;
};
/**
* struct adis16080_state - device instance specific data
* @us: actual spi_device to write data
* @info: chip specific parameters
* @buf: transmit or receive buffer
**/
struct adis16080_state {
struct spi_device *us;
const struct adis16080_chip_info *info;
__be16 buf ____cacheline_aligned;
};
static int adis16080_read_sample(struct iio_dev *indio_dev,
u16 addr, int *val)
{
struct adis16080_state *st = iio_priv(indio_dev);
int ret;
struct spi_transfer t[] = {
{
.tx_buf = &st->buf,
.len = 2,
.cs_change = 1,
}, {
.rx_buf = &st->buf,
.len = 2,
},
};
st->buf = cpu_to_be16(addr | ADIS16080_DIN_WRITE);
ret = spi_sync_transfer(st->us, t, ARRAY_SIZE(t));
if (ret == 0)
*val = sign_extend32(be16_to_cpu(st->buf), 11);
return ret;
}
static int adis16080_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long mask)
{
struct adis16080_state *st = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&indio_dev->mlock);
ret = adis16080_read_sample(indio_dev, chan->address, val);
mutex_unlock(&indio_dev->mlock);
return ret ? ret : IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_ANGL_VEL:
*val = st->info->scale_val;
*val2 = st->info->scale_val2;
return IIO_VAL_FRACTIONAL;
case IIO_VOLTAGE:
/* VREF = 5V, 12 bits */
*val = 5000;
*val2 = 12;
return IIO_VAL_FRACTIONAL_LOG2;
case IIO_TEMP:
/* 85 C = 585, 25 C = 0 */
*val = 85000 - 25000;
*val2 = 585;
return IIO_VAL_FRACTIONAL;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
switch (chan->type) {
case IIO_VOLTAGE:
/* 2.5 V = 0 */
*val = 2048;
return IIO_VAL_INT;
case IIO_TEMP:
/* 85 C = 585, 25 C = 0 */
*val = DIV_ROUND_CLOSEST(25 * 585, 85 - 25);
return IIO_VAL_INT;
default:
return -EINVAL;
}
default:
break;
}
return -EINVAL;
}
static const struct iio_chan_spec adis16080_channels[] = {
{
.type = IIO_ANGL_VEL,
.modified = 1,
.channel2 = IIO_MOD_Z,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
.address = ADIS16080_DIN_GYRO,
}, {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET),
.address = ADIS16080_DIN_AIN1,
}, {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET),
.address = ADIS16080_DIN_AIN2,
}, {
.type = IIO_TEMP,
.indexed = 1,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET),
.address = ADIS16080_DIN_TEMP,
}
};
static const struct iio_info adis16080_info = {
.read_raw = &adis16080_read_raw,
};
enum {
ID_ADIS16080,
ID_ADIS16100,
};
static const struct adis16080_chip_info adis16080_chip_info[] = {
[ID_ADIS16080] = {
/* 80 degree = 819, 819 rad = 46925 degree */
.scale_val = 80,
.scale_val2 = 46925,
},
[ID_ADIS16100] = {
/* 300 degree = 1230, 1230 rad = 70474 degree */
.scale_val = 300,
.scale_val2 = 70474,
},
};
static int adis16080_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct adis16080_state *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
/* Allocate the comms buffers */
st->us = spi;
st->info = &adis16080_chip_info[id->driver_data];
indio_dev->name = spi->dev.driver->name;
indio_dev->channels = adis16080_channels;
indio_dev->num_channels = ARRAY_SIZE(adis16080_channels);
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16080_info;
indio_dev->modes = INDIO_DIRECT_MODE;
return iio_device_register(indio_dev);
}
static int adis16080_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
return 0;
}
static const struct spi_device_id adis16080_ids[] = {
{ "adis16080", ID_ADIS16080 },
{ "adis16100", ID_ADIS16100 },
{},
};
MODULE_DEVICE_TABLE(spi, adis16080_ids);
static struct spi_driver adis16080_driver = {
.driver = {
.name = "adis16080",
},
.probe = adis16080_probe,
.remove = adis16080_remove,
.id_table = adis16080_ids,
};
module_spi_driver(adis16080_driver);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16080/100 Yaw Rate Gyroscope Driver");
MODULE_LICENSE("GPL v2");