linux/fs/btrfs/tree-log.h
Filipe Manana 487781796d btrfs: make fast fsyncs wait only for writeback
Currently regardless of a full or a fast fsync we always wait for ordered
extents to complete, and then start logging the inode after that. However
for fast fsyncs we can just wait for the writeback to complete, we don't
need to wait for the ordered extents to complete since we use the list of
modified extents maps to figure out which extents we must log and we can
get their checksums directly from the ordered extents that are still in
flight, otherwise look them up from the checksums tree.

Until commit b5e6c3e170 ("btrfs: always wait on ordered extents at
fsync time"), for fast fsyncs, we used to start logging without even
waiting for the writeback to complete first, we would wait for it to
complete after logging, while holding a transaction open, which lead to
performance issues when using cgroups and probably for other cases too,
as wait for IO while holding a transaction handle should be avoided as
much as possible. After that, for fast fsyncs, we started to wait for
ordered extents to complete before starting to log, which adds some
latency to fsyncs and we even got at least one report about a performance
drop which bisected to that particular change:

https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/

This change makes fast fsyncs only wait for writeback to finish before
starting to log the inode, instead of waiting for both the writeback to
finish and for the ordered extents to complete. This brings back part of
the logic we had that extracts checksums from in flight ordered extents,
which are not yet in the checksums tree, and making sure transaction
commits wait for the completion of ordered extents previously logged
(by far most of the time they have already completed by the time a
transaction commit starts, resulting in no wait at all), to avoid any
data loss if an ordered extent completes after the transaction used to
log an inode is committed, followed by a power failure.

When there are no other tasks accessing the checksums and the subvolume
btrees, the ordered extent completion is pretty fast, typically taking
100 to 200 microseconds only in my observations. However when there are
other tasks accessing these btrees, ordered extent completion can take a
lot more time due to lock contention on nodes and leaves of these btrees.
I've seen cases over 2 milliseconds, which starts to be significant. In
particular when we do have concurrent fsyncs against different files there
is a lot of contention on the checksums btree, since we have many tasks
writing the checksums into the btree and other tasks that already started
the logging phase are doing lookups for checksums in the btree.

This change also turns all ranged fsyncs into full ranged fsyncs, which
is something we already did when not using the NO_HOLES features or when
doing a full fsync. This is to guarantee we never miss checksums due to
writeback having been triggered only for a part of an extent, and we end
up logging the full extent but only checksums for the written range, which
results in missing checksums after log replay. Allowing ranged fsyncs to
operate again only in the original range, when using the NO_HOLES feature
and doing a fast fsync is doable but requires some non trivial changes to
the writeback path, which can always be worked on later if needed, but I
don't think they are a very common use case.

Several tests were performed using fio for different numbers of concurrent
jobs, each writing and fsyncing its own file, for both sequential and
random file writes. The tests were run on bare metal, no virtualization,
on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device,
with a kernel configuration that is the default of typical distributions
(debian in this case), without debug options enabled (kasan, kmemleak,
slub debug, debug of page allocations, lock debugging, etc).

The following script that calls fio was used:

  $ cat test-fsync.sh
  #!/bin/bash

  DEV=/dev/nvme0n1
  MNT=/mnt/btrfs
  MOUNT_OPTIONS="-o ssd -o space_cache=v2"
  MKFS_OPTIONS="-d single -m single"

  if [ $# -ne 5 ]; then
    echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]"
    exit 1
  fi

  NUM_JOBS=$1
  FILE_SIZE=$2
  FSYNC_FREQ=$3
  BLOCK_SIZE=$4
  WRITE_MODE=$5

  if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then
    echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'"
    exit 1
  fi

  cat <<EOF > /tmp/fio-job.ini
  [writers]
  rw=$WRITE_MODE
  fsync=$FSYNC_FREQ
  fallocate=none
  group_reporting=1
  direct=0
  bs=$BLOCK_SIZE
  ioengine=sync
  size=$FILE_SIZE
  directory=$MNT
  numjobs=$NUM_JOBS
  EOF

  echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor

  echo
  echo "Using config:"
  echo
  cat /tmp/fio-job.ini
  echo

  umount $MNT &> /dev/null
  mkfs.btrfs -f $MKFS_OPTIONS $DEV
  mount $MOUNT_OPTIONS $DEV $MNT
  fio /tmp/fio-job.ini
  umount $MNT

The results were the following:

*************************
*** sequential writes ***
*************************

==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ====

Before patch:

WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec

After patch:

WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec
(+9.8%, -8.8% runtime)

==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ====

Before patch:

WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec

After patch:

WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec
(+21.5% throughput, -17.8% runtime)

==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ====

Before patch:

WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec

After patch:

WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec
(+28.7% throughput, -22.3% runtime)

==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ====

Before patch:

WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec

After patch:

WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec
(+35.6% throughput, -25.2% runtime)

==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ====

Before patch:

WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec

After patch:

WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec
(+34.1% throughput, -25.6% runtime)

==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ====

Before patch:

WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec

After patch:

WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec
(+19.1% throughput, -16.4% runtime)

==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ====

Before patch:

WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec

After patch:

WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec
(+23.1% throughput, -18.7% runtime)

************************
***   random writes  ***
************************

==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ====

Before patch:

WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec

After patch:

WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec
(+0.9% throughput, -1.7% runtime)

==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ====

Before patch:

WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec

After patch:

WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec
(+2.3% throughput, -2.0% runtime)

==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ====

Before patch:

WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec

After patch:

WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec
(+15.6% throughput, -13.3% runtime)

==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ====

Before patch:

WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec

After patch:

WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec
(+11.6% throughput, -10.7% runtime)

==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ====

Before patch:

WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec

After patch:

WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec
(+3.8% throughput, -3.8% runtime)

==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ====

Before patch:

WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec

After patch:

WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec
(+12.7% throughput, -11.2% runtime)

==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ====

Before patch:

WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec

After patch:

WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec
(+6.3% throughput, -6.0% runtime)

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:06:56 +02:00

91 lines
2.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2008 Oracle. All rights reserved.
*/
#ifndef BTRFS_TREE_LOG_H
#define BTRFS_TREE_LOG_H
#include "ctree.h"
#include "transaction.h"
/* return value for btrfs_log_dentry_safe that means we don't need to log it at all */
#define BTRFS_NO_LOG_SYNC 256
struct btrfs_log_ctx {
int log_ret;
int log_transid;
bool log_new_dentries;
bool logging_new_name;
struct inode *inode;
struct list_head list;
/* Only used for fast fsyncs. */
struct list_head ordered_extents;
};
static inline void btrfs_init_log_ctx(struct btrfs_log_ctx *ctx,
struct inode *inode)
{
ctx->log_ret = 0;
ctx->log_transid = 0;
ctx->log_new_dentries = false;
ctx->logging_new_name = false;
ctx->inode = inode;
INIT_LIST_HEAD(&ctx->list);
INIT_LIST_HEAD(&ctx->ordered_extents);
}
static inline void btrfs_release_log_ctx_extents(struct btrfs_log_ctx *ctx)
{
struct btrfs_ordered_extent *ordered;
struct btrfs_ordered_extent *tmp;
ASSERT(inode_is_locked(ctx->inode));
list_for_each_entry_safe(ordered, tmp, &ctx->ordered_extents, log_list) {
list_del_init(&ordered->log_list);
btrfs_put_ordered_extent(ordered);
}
}
static inline void btrfs_set_log_full_commit(struct btrfs_trans_handle *trans)
{
WRITE_ONCE(trans->fs_info->last_trans_log_full_commit, trans->transid);
}
static inline int btrfs_need_log_full_commit(struct btrfs_trans_handle *trans)
{
return READ_ONCE(trans->fs_info->last_trans_log_full_commit) ==
trans->transid;
}
int btrfs_sync_log(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_log_ctx *ctx);
int btrfs_free_log(struct btrfs_trans_handle *trans, struct btrfs_root *root);
int btrfs_free_log_root_tree(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info);
int btrfs_recover_log_trees(struct btrfs_root *tree_root);
int btrfs_log_dentry_safe(struct btrfs_trans_handle *trans,
struct dentry *dentry,
struct btrfs_log_ctx *ctx);
int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
const char *name, int name_len,
struct btrfs_inode *dir, u64 index);
int btrfs_del_inode_ref_in_log(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
const char *name, int name_len,
struct btrfs_inode *inode, u64 dirid);
void btrfs_end_log_trans(struct btrfs_root *root);
void btrfs_pin_log_trans(struct btrfs_root *root);
void btrfs_record_unlink_dir(struct btrfs_trans_handle *trans,
struct btrfs_inode *dir, struct btrfs_inode *inode,
int for_rename);
void btrfs_record_snapshot_destroy(struct btrfs_trans_handle *trans,
struct btrfs_inode *dir);
void btrfs_log_new_name(struct btrfs_trans_handle *trans,
struct btrfs_inode *inode, struct btrfs_inode *old_dir,
struct dentry *parent);
#endif