linux/kernel/time.c
Roman Zippel 5ddcfa878d [PATCH] remove pps support
This removes the support for pps.  It's completely unused within the kernel
and is basically in the way for further cleanups.  It should be easier to
readd proper support for it after the rest has been converted to NTP4
(where the pps mechanisms are quite different from NTP3 anyway).

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:23:02 -08:00

661 lines
17 KiB
C

/*
* linux/kernel/time.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* This file contains the interface functions for the various
* time related system calls: time, stime, gettimeofday, settimeofday,
* adjtime
*/
/*
* Modification history kernel/time.c
*
* 1993-09-02 Philip Gladstone
* Created file with time related functions from sched.c and adjtimex()
* 1993-10-08 Torsten Duwe
* adjtime interface update and CMOS clock write code
* 1995-08-13 Torsten Duwe
* kernel PLL updated to 1994-12-13 specs (rfc-1589)
* 1999-01-16 Ulrich Windl
* Introduced error checking for many cases in adjtimex().
* Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
* Allow time_constant larger than MAXTC(6) for NTP v4 (MAXTC == 10)
* (Even though the technical memorandum forbids it)
* 2004-07-14 Christoph Lameter
* Added getnstimeofday to allow the posix timer functions to return
* with nanosecond accuracy
*/
#include <linux/module.h>
#include <linux/timex.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/security.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
/*
* The timezone where the local system is located. Used as a default by some
* programs who obtain this value by using gettimeofday.
*/
struct timezone sys_tz;
EXPORT_SYMBOL(sys_tz);
#ifdef __ARCH_WANT_SYS_TIME
/*
* sys_time() can be implemented in user-level using
* sys_gettimeofday(). Is this for backwards compatibility? If so,
* why not move it into the appropriate arch directory (for those
* architectures that need it).
*/
asmlinkage long sys_time(time_t __user * tloc)
{
time_t i;
struct timeval tv;
do_gettimeofday(&tv);
i = tv.tv_sec;
if (tloc) {
if (put_user(i,tloc))
i = -EFAULT;
}
return i;
}
/*
* sys_stime() can be implemented in user-level using
* sys_settimeofday(). Is this for backwards compatibility? If so,
* why not move it into the appropriate arch directory (for those
* architectures that need it).
*/
asmlinkage long sys_stime(time_t __user *tptr)
{
struct timespec tv;
int err;
if (get_user(tv.tv_sec, tptr))
return -EFAULT;
tv.tv_nsec = 0;
err = security_settime(&tv, NULL);
if (err)
return err;
do_settimeofday(&tv);
return 0;
}
#endif /* __ARCH_WANT_SYS_TIME */
asmlinkage long sys_gettimeofday(struct timeval __user *tv, struct timezone __user *tz)
{
if (likely(tv != NULL)) {
struct timeval ktv;
do_gettimeofday(&ktv);
if (copy_to_user(tv, &ktv, sizeof(ktv)))
return -EFAULT;
}
if (unlikely(tz != NULL)) {
if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
return -EFAULT;
}
return 0;
}
/*
* Adjust the time obtained from the CMOS to be UTC time instead of
* local time.
*
* This is ugly, but preferable to the alternatives. Otherwise we
* would either need to write a program to do it in /etc/rc (and risk
* confusion if the program gets run more than once; it would also be
* hard to make the program warp the clock precisely n hours) or
* compile in the timezone information into the kernel. Bad, bad....
*
* - TYT, 1992-01-01
*
* The best thing to do is to keep the CMOS clock in universal time (UTC)
* as real UNIX machines always do it. This avoids all headaches about
* daylight saving times and warping kernel clocks.
*/
static inline void warp_clock(void)
{
write_seqlock_irq(&xtime_lock);
wall_to_monotonic.tv_sec -= sys_tz.tz_minuteswest * 60;
xtime.tv_sec += sys_tz.tz_minuteswest * 60;
time_interpolator_reset();
write_sequnlock_irq(&xtime_lock);
clock_was_set();
}
/*
* In case for some reason the CMOS clock has not already been running
* in UTC, but in some local time: The first time we set the timezone,
* we will warp the clock so that it is ticking UTC time instead of
* local time. Presumably, if someone is setting the timezone then we
* are running in an environment where the programs understand about
* timezones. This should be done at boot time in the /etc/rc script,
* as soon as possible, so that the clock can be set right. Otherwise,
* various programs will get confused when the clock gets warped.
*/
int do_sys_settimeofday(struct timespec *tv, struct timezone *tz)
{
static int firsttime = 1;
int error = 0;
if (tv && !timespec_valid(tv))
return -EINVAL;
error = security_settime(tv, tz);
if (error)
return error;
if (tz) {
/* SMP safe, global irq locking makes it work. */
sys_tz = *tz;
if (firsttime) {
firsttime = 0;
if (!tv)
warp_clock();
}
}
if (tv)
{
/* SMP safe, again the code in arch/foo/time.c should
* globally block out interrupts when it runs.
*/
return do_settimeofday(tv);
}
return 0;
}
asmlinkage long sys_settimeofday(struct timeval __user *tv,
struct timezone __user *tz)
{
struct timeval user_tv;
struct timespec new_ts;
struct timezone new_tz;
if (tv) {
if (copy_from_user(&user_tv, tv, sizeof(*tv)))
return -EFAULT;
new_ts.tv_sec = user_tv.tv_sec;
new_ts.tv_nsec = user_tv.tv_usec * NSEC_PER_USEC;
}
if (tz) {
if (copy_from_user(&new_tz, tz, sizeof(*tz)))
return -EFAULT;
}
return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
}
/* we call this to notify the arch when the clock is being
* controlled. If no such arch routine, do nothing.
*/
void __attribute__ ((weak)) notify_arch_cmos_timer(void)
{
return;
}
/* adjtimex mainly allows reading (and writing, if superuser) of
* kernel time-keeping variables. used by xntpd.
*/
int do_adjtimex(struct timex *txc)
{
long ltemp, mtemp, save_adjust;
int result;
/* In order to modify anything, you gotta be super-user! */
if (txc->modes && !capable(CAP_SYS_TIME))
return -EPERM;
/* Now we validate the data before disabling interrupts */
if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
/* singleshot must not be used with any other mode bits */
if (txc->modes != ADJ_OFFSET_SINGLESHOT)
return -EINVAL;
if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
/* adjustment Offset limited to +- .512 seconds */
if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
return -EINVAL;
/* if the quartz is off by more than 10% something is VERY wrong ! */
if (txc->modes & ADJ_TICK)
if (txc->tick < 900000/USER_HZ ||
txc->tick > 1100000/USER_HZ)
return -EINVAL;
write_seqlock_irq(&xtime_lock);
result = time_state; /* mostly `TIME_OK' */
/* Save for later - semantics of adjtime is to return old value */
save_adjust = time_next_adjust ? time_next_adjust : time_adjust;
#if 0 /* STA_CLOCKERR is never set yet */
time_status &= ~STA_CLOCKERR; /* reset STA_CLOCKERR */
#endif
/* If there are input parameters, then process them */
if (txc->modes)
{
if (txc->modes & ADJ_STATUS) /* only set allowed bits */
time_status = (txc->status & ~STA_RONLY) |
(time_status & STA_RONLY);
if (txc->modes & ADJ_FREQUENCY) { /* p. 22 */
if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
result = -EINVAL;
goto leave;
}
time_freq = txc->freq;
}
if (txc->modes & ADJ_MAXERROR) {
if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
result = -EINVAL;
goto leave;
}
time_maxerror = txc->maxerror;
}
if (txc->modes & ADJ_ESTERROR) {
if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
result = -EINVAL;
goto leave;
}
time_esterror = txc->esterror;
}
if (txc->modes & ADJ_TIMECONST) { /* p. 24 */
if (txc->constant < 0) { /* NTP v4 uses values > 6 */
result = -EINVAL;
goto leave;
}
time_constant = txc->constant;
}
if (txc->modes & ADJ_OFFSET) { /* values checked earlier */
if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
/* adjtime() is independent from ntp_adjtime() */
if ((time_next_adjust = txc->offset) == 0)
time_adjust = 0;
}
else if (time_status & STA_PLL) {
ltemp = txc->offset;
/*
* Scale the phase adjustment and
* clamp to the operating range.
*/
if (ltemp > MAXPHASE)
time_offset = MAXPHASE << SHIFT_UPDATE;
else if (ltemp < -MAXPHASE)
time_offset = -(MAXPHASE << SHIFT_UPDATE);
else
time_offset = ltemp << SHIFT_UPDATE;
/*
* Select whether the frequency is to be controlled
* and in which mode (PLL or FLL). Clamp to the operating
* range. Ugly multiply/divide should be replaced someday.
*/
if (time_status & STA_FREQHOLD || time_reftime == 0)
time_reftime = xtime.tv_sec;
mtemp = xtime.tv_sec - time_reftime;
time_reftime = xtime.tv_sec;
if (time_status & STA_FLL) {
if (mtemp >= MINSEC) {
ltemp = (time_offset / mtemp) << (SHIFT_USEC -
SHIFT_UPDATE);
time_freq += shift_right(ltemp, SHIFT_KH);
} else /* calibration interval too short (p. 12) */
result = TIME_ERROR;
} else { /* PLL mode */
if (mtemp < MAXSEC) {
ltemp *= mtemp;
time_freq += shift_right(ltemp,(time_constant +
time_constant +
SHIFT_KF - SHIFT_USEC));
} else /* calibration interval too long (p. 12) */
result = TIME_ERROR;
}
time_freq = min(time_freq, time_tolerance);
time_freq = max(time_freq, -time_tolerance);
} /* STA_PLL */
} /* txc->modes & ADJ_OFFSET */
if (txc->modes & ADJ_TICK) {
tick_usec = txc->tick;
tick_nsec = TICK_USEC_TO_NSEC(tick_usec);
}
} /* txc->modes */
leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
result = TIME_ERROR;
if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
txc->offset = save_adjust;
else {
txc->offset = shift_right(time_offset, SHIFT_UPDATE);
}
txc->freq = time_freq;
txc->maxerror = time_maxerror;
txc->esterror = time_esterror;
txc->status = time_status;
txc->constant = time_constant;
txc->precision = time_precision;
txc->tolerance = time_tolerance;
txc->tick = tick_usec;
/* PPS is not implemented, so these are zero */
txc->ppsfreq = 0;
txc->jitter = 0;
txc->shift = 0;
txc->stabil = 0;
txc->jitcnt = 0;
txc->calcnt = 0;
txc->errcnt = 0;
txc->stbcnt = 0;
write_sequnlock_irq(&xtime_lock);
do_gettimeofday(&txc->time);
notify_arch_cmos_timer();
return(result);
}
asmlinkage long sys_adjtimex(struct timex __user *txc_p)
{
struct timex txc; /* Local copy of parameter */
int ret;
/* Copy the user data space into the kernel copy
* structure. But bear in mind that the structures
* may change
*/
if(copy_from_user(&txc, txc_p, sizeof(struct timex)))
return -EFAULT;
ret = do_adjtimex(&txc);
return copy_to_user(txc_p, &txc, sizeof(struct timex)) ? -EFAULT : ret;
}
inline struct timespec current_kernel_time(void)
{
struct timespec now;
unsigned long seq;
do {
seq = read_seqbegin(&xtime_lock);
now = xtime;
} while (read_seqretry(&xtime_lock, seq));
return now;
}
EXPORT_SYMBOL(current_kernel_time);
/**
* current_fs_time - Return FS time
* @sb: Superblock.
*
* Return the current time truncated to the time granuality supported by
* the fs.
*/
struct timespec current_fs_time(struct super_block *sb)
{
struct timespec now = current_kernel_time();
return timespec_trunc(now, sb->s_time_gran);
}
EXPORT_SYMBOL(current_fs_time);
/**
* timespec_trunc - Truncate timespec to a granuality
* @t: Timespec
* @gran: Granuality in ns.
*
* Truncate a timespec to a granuality. gran must be smaller than a second.
* Always rounds down.
*
* This function should be only used for timestamps returned by
* current_kernel_time() or CURRENT_TIME, not with do_gettimeofday() because
* it doesn't handle the better resolution of the later.
*/
struct timespec timespec_trunc(struct timespec t, unsigned gran)
{
/*
* Division is pretty slow so avoid it for common cases.
* Currently current_kernel_time() never returns better than
* jiffies resolution. Exploit that.
*/
if (gran <= jiffies_to_usecs(1) * 1000) {
/* nothing */
} else if (gran == 1000000000) {
t.tv_nsec = 0;
} else {
t.tv_nsec -= t.tv_nsec % gran;
}
return t;
}
EXPORT_SYMBOL(timespec_trunc);
#ifdef CONFIG_TIME_INTERPOLATION
void getnstimeofday (struct timespec *tv)
{
unsigned long seq,sec,nsec;
do {
seq = read_seqbegin(&xtime_lock);
sec = xtime.tv_sec;
nsec = xtime.tv_nsec+time_interpolator_get_offset();
} while (unlikely(read_seqretry(&xtime_lock, seq)));
while (unlikely(nsec >= NSEC_PER_SEC)) {
nsec -= NSEC_PER_SEC;
++sec;
}
tv->tv_sec = sec;
tv->tv_nsec = nsec;
}
EXPORT_SYMBOL_GPL(getnstimeofday);
int do_settimeofday (struct timespec *tv)
{
time_t wtm_sec, sec = tv->tv_sec;
long wtm_nsec, nsec = tv->tv_nsec;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
write_seqlock_irq(&xtime_lock);
{
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
time_adjust = 0; /* stop active adjtime() */
time_status |= STA_UNSYNC;
time_maxerror = NTP_PHASE_LIMIT;
time_esterror = NTP_PHASE_LIMIT;
time_interpolator_reset();
}
write_sequnlock_irq(&xtime_lock);
clock_was_set();
return 0;
}
EXPORT_SYMBOL(do_settimeofday);
void do_gettimeofday (struct timeval *tv)
{
unsigned long seq, nsec, usec, sec, offset;
do {
seq = read_seqbegin(&xtime_lock);
offset = time_interpolator_get_offset();
sec = xtime.tv_sec;
nsec = xtime.tv_nsec;
} while (unlikely(read_seqretry(&xtime_lock, seq)));
usec = (nsec + offset) / 1000;
while (unlikely(usec >= USEC_PER_SEC)) {
usec -= USEC_PER_SEC;
++sec;
}
tv->tv_sec = sec;
tv->tv_usec = usec;
}
EXPORT_SYMBOL(do_gettimeofday);
#else
/*
* Simulate gettimeofday using do_gettimeofday which only allows a timeval
* and therefore only yields usec accuracy
*/
void getnstimeofday(struct timespec *tv)
{
struct timeval x;
do_gettimeofday(&x);
tv->tv_sec = x.tv_sec;
tv->tv_nsec = x.tv_usec * NSEC_PER_USEC;
}
EXPORT_SYMBOL_GPL(getnstimeofday);
#endif
/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
* Assumes input in normal date format, i.e. 1980-12-31 23:59:59
* => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
*
* [For the Julian calendar (which was used in Russia before 1917,
* Britain & colonies before 1752, anywhere else before 1582,
* and is still in use by some communities) leave out the
* -year/100+year/400 terms, and add 10.]
*
* This algorithm was first published by Gauss (I think).
*
* WARNING: this function will overflow on 2106-02-07 06:28:16 on
* machines were long is 32-bit! (However, as time_t is signed, we
* will already get problems at other places on 2038-01-19 03:14:08)
*/
unsigned long
mktime(const unsigned int year0, const unsigned int mon0,
const unsigned int day, const unsigned int hour,
const unsigned int min, const unsigned int sec)
{
unsigned int mon = mon0, year = year0;
/* 1..12 -> 11,12,1..10 */
if (0 >= (int) (mon -= 2)) {
mon += 12; /* Puts Feb last since it has leap day */
year -= 1;
}
return ((((unsigned long)
(year/4 - year/100 + year/400 + 367*mon/12 + day) +
year*365 - 719499
)*24 + hour /* now have hours */
)*60 + min /* now have minutes */
)*60 + sec; /* finally seconds */
}
EXPORT_SYMBOL(mktime);
/**
* set_normalized_timespec - set timespec sec and nsec parts and normalize
*
* @ts: pointer to timespec variable to be set
* @sec: seconds to set
* @nsec: nanoseconds to set
*
* Set seconds and nanoseconds field of a timespec variable and
* normalize to the timespec storage format
*
* Note: The tv_nsec part is always in the range of
* 0 <= tv_nsec < NSEC_PER_SEC
* For negative values only the tv_sec field is negative !
*/
void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec)
{
while (nsec >= NSEC_PER_SEC) {
nsec -= NSEC_PER_SEC;
++sec;
}
while (nsec < 0) {
nsec += NSEC_PER_SEC;
--sec;
}
ts->tv_sec = sec;
ts->tv_nsec = nsec;
}
/**
* ns_to_timespec - Convert nanoseconds to timespec
* @nsec: the nanoseconds value to be converted
*
* Returns the timespec representation of the nsec parameter.
*/
struct timespec ns_to_timespec(const nsec_t nsec)
{
struct timespec ts;
if (!nsec)
return (struct timespec) {0, 0};
ts.tv_sec = div_long_long_rem_signed(nsec, NSEC_PER_SEC, &ts.tv_nsec);
if (unlikely(nsec < 0))
set_normalized_timespec(&ts, ts.tv_sec, ts.tv_nsec);
return ts;
}
/**
* ns_to_timeval - Convert nanoseconds to timeval
* @nsec: the nanoseconds value to be converted
*
* Returns the timeval representation of the nsec parameter.
*/
struct timeval ns_to_timeval(const nsec_t nsec)
{
struct timespec ts = ns_to_timespec(nsec);
struct timeval tv;
tv.tv_sec = ts.tv_sec;
tv.tv_usec = (suseconds_t) ts.tv_nsec / 1000;
return tv;
}
#if (BITS_PER_LONG < 64)
u64 get_jiffies_64(void)
{
unsigned long seq;
u64 ret;
do {
seq = read_seqbegin(&xtime_lock);
ret = jiffies_64;
} while (read_seqretry(&xtime_lock, seq));
return ret;
}
EXPORT_SYMBOL(get_jiffies_64);
#endif
EXPORT_SYMBOL(jiffies);