mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
3d5134ee83
This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
153 lines
4.7 KiB
C
153 lines
4.7 KiB
C
/*
|
|
* c 2001 PPC 64 Team, IBM Corp
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
#ifndef _ASM_POWERPC_PPC_PCI_H
|
|
#define _ASM_POWERPC_PPC_PCI_H
|
|
#ifdef __KERNEL__
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
#include <linux/pci.h>
|
|
#include <asm/pci-bridge.h>
|
|
|
|
extern unsigned long isa_io_base;
|
|
|
|
extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
|
|
extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
|
|
|
|
|
|
extern struct list_head hose_list;
|
|
extern int global_phb_number;
|
|
|
|
extern void find_and_init_phbs(void);
|
|
|
|
extern struct pci_dev *isa_bridge_pcidev; /* may be NULL if no ISA bus */
|
|
|
|
/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */
|
|
#define BUID_HI(buid) ((buid) >> 32)
|
|
#define BUID_LO(buid) ((buid) & 0xffffffff)
|
|
|
|
/* PCI device_node operations */
|
|
struct device_node;
|
|
typedef void *(*traverse_func)(struct device_node *me, void *data);
|
|
void *traverse_pci_devices(struct device_node *start, traverse_func pre,
|
|
void *data);
|
|
|
|
extern void pci_devs_phb_init(void);
|
|
extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
|
|
extern void scan_phb(struct pci_controller *hose);
|
|
|
|
/* From rtas_pci.h */
|
|
extern void init_pci_config_tokens (void);
|
|
extern unsigned long get_phb_buid (struct device_node *);
|
|
extern int rtas_setup_phb(struct pci_controller *phb);
|
|
|
|
/* From iSeries PCI */
|
|
extern void iSeries_pcibios_init(void);
|
|
|
|
extern unsigned long pci_probe_only;
|
|
|
|
/* ---- EEH internal-use-only related routines ---- */
|
|
#ifdef CONFIG_EEH
|
|
|
|
void pci_addr_cache_insert_device(struct pci_dev *dev);
|
|
void pci_addr_cache_remove_device(struct pci_dev *dev);
|
|
void pci_addr_cache_build(void);
|
|
struct pci_dev *pci_get_device_by_addr(unsigned long addr);
|
|
|
|
/**
|
|
* eeh_slot_error_detail -- record and EEH error condition to the log
|
|
* @pdn: pci device node
|
|
* @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
|
|
*
|
|
* Obtains the EEH error details from the RTAS subsystem,
|
|
* and then logs these details with the RTAS error log system.
|
|
*/
|
|
#define EEH_LOG_TEMP_FAILURE 1
|
|
#define EEH_LOG_PERM_FAILURE 2
|
|
void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
|
|
|
|
/**
|
|
* rtas_pci_enable - enable IO transfers for this slot
|
|
* @pdn: pci device node
|
|
* @function: either EEH_THAW_MMIO or EEH_THAW_DMA
|
|
*
|
|
* Enable I/O transfers to this slot
|
|
*/
|
|
#define EEH_THAW_MMIO 2
|
|
#define EEH_THAW_DMA 3
|
|
int rtas_pci_enable(struct pci_dn *pdn, int function);
|
|
|
|
/**
|
|
* rtas_set_slot_reset -- unfreeze a frozen slot
|
|
* @pdn: pci device node
|
|
*
|
|
* Clear the EEH-frozen condition on a slot. This routine
|
|
* does this by asserting the PCI #RST line for 1/8th of
|
|
* a second; this routine will sleep while the adapter is
|
|
* being reset.
|
|
*
|
|
* Returns a non-zero value if the reset failed.
|
|
*/
|
|
int rtas_set_slot_reset (struct pci_dn *);
|
|
int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
|
|
|
|
/**
|
|
* eeh_restore_bars - Restore device configuration info.
|
|
* @pdn: pci device node
|
|
*
|
|
* A reset of a PCI device will clear out its config space.
|
|
* This routines will restore the config space for this
|
|
* device, and is children, to values previously obtained
|
|
* from the firmware.
|
|
*/
|
|
void eeh_restore_bars(struct pci_dn *);
|
|
|
|
/**
|
|
* rtas_configure_bridge -- firmware initialization of pci bridge
|
|
* @pdn: pci device node
|
|
*
|
|
* Ask the firmware to configure all PCI bridges devices
|
|
* located behind the indicated node. Required after a
|
|
* pci device reset. Does essentially the same hing as
|
|
* eeh_restore_bars, but for brdges, and lets firmware
|
|
* do the work.
|
|
*/
|
|
void rtas_configure_bridge(struct pci_dn *);
|
|
|
|
int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
|
|
int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
|
|
|
|
/**
|
|
* eeh_mark_slot -- set mode flags for pertition endpoint
|
|
* @pdn: pci device node
|
|
*
|
|
* mark and clear slots: find "partition endpoint" PE and set or
|
|
* clear the flags for each subnode of the PE.
|
|
*/
|
|
void eeh_mark_slot (struct device_node *dn, int mode_flag);
|
|
void eeh_clear_slot (struct device_node *dn, int mode_flag);
|
|
|
|
/**
|
|
* find_device_pe -- Find the associated "Partiationable Endpoint" PE
|
|
* @pdn: pci device node
|
|
*/
|
|
struct device_node * find_device_pe(struct device_node *dn);
|
|
|
|
void eeh_sysfs_add_device(struct pci_dev *pdev);
|
|
void eeh_sysfs_remove_device(struct pci_dev *pdev);
|
|
|
|
#endif /* CONFIG_EEH */
|
|
|
|
#else /* CONFIG_PCI */
|
|
static inline void find_and_init_phbs(void) { }
|
|
static inline void init_pci_config_tokens(void) { }
|
|
#endif /* !CONFIG_PCI */
|
|
|
|
#endif /* __KERNEL__ */
|
|
#endif /* _ASM_POWERPC_PPC_PCI_H */
|