linux/arch/x86/kernel/dumpstack.c
Linus Torvalds da9803dfd3 This feature enhances the current guest memory encryption support
called SEV by also encrypting the guest register state, making the
 registers inaccessible to the hypervisor by en-/decrypting them on world
 switches. Thus, it adds additional protection to Linux guests against
 exfiltration, control flow and rollback attacks.
 
 With SEV-ES, the guest is in full control of what registers the
 hypervisor can access. This is provided by a guest-host exchange
 mechanism based on a new exception vector called VMM Communication
 Exception (#VC), a new instruction called VMGEXIT and a shared
 Guest-Host Communication Block which is a decrypted page shared between
 the guest and the hypervisor.
 
 Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest so
 in order for that exception mechanism to work, the early x86 init code
 needed to be made able to handle exceptions, which, in itself, brings
 a bunch of very nice cleanups and improvements to the early boot code
 like an early page fault handler, allowing for on-demand building of the
 identity mapping. With that, !KASLR configurations do not use the EFI
 page table anymore but switch to a kernel-controlled one.
 
 The main part of this series adds the support for that new exchange
 mechanism. The goal has been to keep this as much as possibly
 separate from the core x86 code by concentrating the machinery in two
 SEV-ES-specific files:
 
  arch/x86/kernel/sev-es-shared.c
  arch/x86/kernel/sev-es.c
 
 Other interaction with core x86 code has been kept at minimum and behind
 static keys to minimize the performance impact on !SEV-ES setups.
 
 Work by Joerg Roedel and Thomas Lendacky and others.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl+FiKYACgkQEsHwGGHe
 VUqS5BAAlh5mKwtxXMyFyAIHa5tpsgDjbecFzy1UVmZyxN0JHLlM3NLmb+K52drY
 PiWjNNMi/cFMFazkuLFHuY0poBWrZml8zRS/mExKgUJC6EtguS9FQnRE9xjDBoWQ
 gOTSGJWEzT5wnFqo8qHwlC2CDCSF1hfL8ks3cUFW2tCWus4F9pyaMSGfFqD224rg
 Lh/8+arDMSIKE4uH0cm7iSuyNpbobId0l5JNDfCEFDYRigQZ6pZsQ9pbmbEpncs4
 rmjDvBA5eHDlNMXq0ukqyrjxWTX4ZLBOBvuLhpyssSXnnu2T+Tcxg09+ZSTyJAe0
 LyC9Wfo0v78JASXMAdeH9b1d1mRYNMqjvnBItNQoqweoqUXWz7kvgxCOp6b/G4xp
 cX5YhB6BprBW2DXL45frMRT/zX77UkEKYc5+0IBegV2xfnhRsjqQAQaWLIksyEaX
 nz9/C6+1Sr2IAv271yykeJtY6gtlRjg/usTlYpev+K0ghvGvTmuilEiTltjHrso1
 XAMbfWHQGSd61LNXofvx/GLNfGBisS6dHVHwtkayinSjXNdWxI6w9fhbWVjQ+y2V
 hOF05lmzaJSG5kPLrsFHFqm2YcxOmsWkYYDBHvtmBkMZSf5B+9xxDv97Uy9NETcr
 eSYk//TEkKQqVazfCQS/9LSm0MllqKbwNO25sl0Tw2k6PnheO2g=
 =toqi
 -----END PGP SIGNATURE-----

Merge tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 SEV-ES support from Borislav Petkov:
 "SEV-ES enhances the current guest memory encryption support called SEV
  by also encrypting the guest register state, making the registers
  inaccessible to the hypervisor by en-/decrypting them on world
  switches. Thus, it adds additional protection to Linux guests against
  exfiltration, control flow and rollback attacks.

  With SEV-ES, the guest is in full control of what registers the
  hypervisor can access. This is provided by a guest-host exchange
  mechanism based on a new exception vector called VMM Communication
  Exception (#VC), a new instruction called VMGEXIT and a shared
  Guest-Host Communication Block which is a decrypted page shared
  between the guest and the hypervisor.

  Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest
  so in order for that exception mechanism to work, the early x86 init
  code needed to be made able to handle exceptions, which, in itself,
  brings a bunch of very nice cleanups and improvements to the early
  boot code like an early page fault handler, allowing for on-demand
  building of the identity mapping. With that, !KASLR configurations do
  not use the EFI page table anymore but switch to a kernel-controlled
  one.

  The main part of this series adds the support for that new exchange
  mechanism. The goal has been to keep this as much as possibly separate
  from the core x86 code by concentrating the machinery in two
  SEV-ES-specific files:

    arch/x86/kernel/sev-es-shared.c
    arch/x86/kernel/sev-es.c

  Other interaction with core x86 code has been kept at minimum and
  behind static keys to minimize the performance impact on !SEV-ES
  setups.

  Work by Joerg Roedel and Thomas Lendacky and others"

* tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer
  x86/sev-es: Check required CPU features for SEV-ES
  x86/efi: Add GHCB mappings when SEV-ES is active
  x86/sev-es: Handle NMI State
  x86/sev-es: Support CPU offline/online
  x86/head/64: Don't call verify_cpu() on starting APs
  x86/smpboot: Load TSS and getcpu GDT entry before loading IDT
  x86/realmode: Setup AP jump table
  x86/realmode: Add SEV-ES specific trampoline entry point
  x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES
  x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES
  x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES
  x86/sev-es: Handle #DB Events
  x86/sev-es: Handle #AC Events
  x86/sev-es: Handle VMMCALL Events
  x86/sev-es: Handle MWAIT/MWAITX Events
  x86/sev-es: Handle MONITOR/MONITORX Events
  x86/sev-es: Handle INVD Events
  x86/sev-es: Handle RDPMC Events
  x86/sev-es: Handle RDTSC(P) Events
  ...
2020-10-14 10:21:34 -07:00

462 lines
13 KiB
C

/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
*/
#include <linux/kallsyms.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/utsname.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
#include <linux/module.h>
#include <linux/ptrace.h>
#include <linux/sched/debug.h>
#include <linux/sched/task_stack.h>
#include <linux/ftrace.h>
#include <linux/kexec.h>
#include <linux/bug.h>
#include <linux/nmi.h>
#include <linux/sysfs.h>
#include <linux/kasan.h>
#include <asm/cpu_entry_area.h>
#include <asm/stacktrace.h>
#include <asm/unwind.h>
int panic_on_unrecovered_nmi;
int panic_on_io_nmi;
static int die_counter;
static struct pt_regs exec_summary_regs;
bool noinstr in_task_stack(unsigned long *stack, struct task_struct *task,
struct stack_info *info)
{
unsigned long *begin = task_stack_page(task);
unsigned long *end = task_stack_page(task) + THREAD_SIZE;
if (stack < begin || stack >= end)
return false;
info->type = STACK_TYPE_TASK;
info->begin = begin;
info->end = end;
info->next_sp = NULL;
return true;
}
/* Called from get_stack_info_noinstr - so must be noinstr too */
bool noinstr in_entry_stack(unsigned long *stack, struct stack_info *info)
{
struct entry_stack *ss = cpu_entry_stack(smp_processor_id());
void *begin = ss;
void *end = ss + 1;
if ((void *)stack < begin || (void *)stack >= end)
return false;
info->type = STACK_TYPE_ENTRY;
info->begin = begin;
info->end = end;
info->next_sp = NULL;
return true;
}
static void printk_stack_address(unsigned long address, int reliable,
const char *log_lvl)
{
touch_nmi_watchdog();
printk("%s %s%pB\n", log_lvl, reliable ? "" : "? ", (void *)address);
}
static int copy_code(struct pt_regs *regs, u8 *buf, unsigned long src,
unsigned int nbytes)
{
if (!user_mode(regs))
return copy_from_kernel_nofault(buf, (u8 *)src, nbytes);
/*
* Make sure userspace isn't trying to trick us into dumping kernel
* memory by pointing the userspace instruction pointer at it.
*/
if (__chk_range_not_ok(src, nbytes, TASK_SIZE_MAX))
return -EINVAL;
return copy_from_user_nmi(buf, (void __user *)src, nbytes);
}
/*
* There are a couple of reasons for the 2/3rd prologue, courtesy of Linus:
*
* In case where we don't have the exact kernel image (which, if we did, we can
* simply disassemble and navigate to the RIP), the purpose of the bigger
* prologue is to have more context and to be able to correlate the code from
* the different toolchains better.
*
* In addition, it helps in recreating the register allocation of the failing
* kernel and thus make sense of the register dump.
*
* What is more, the additional complication of a variable length insn arch like
* x86 warrants having longer byte sequence before rIP so that the disassembler
* can "sync" up properly and find instruction boundaries when decoding the
* opcode bytes.
*
* Thus, the 2/3rds prologue and 64 byte OPCODE_BUFSIZE is just a random
* guesstimate in attempt to achieve all of the above.
*/
void show_opcodes(struct pt_regs *regs, const char *loglvl)
{
#define PROLOGUE_SIZE 42
#define EPILOGUE_SIZE 21
#define OPCODE_BUFSIZE (PROLOGUE_SIZE + 1 + EPILOGUE_SIZE)
u8 opcodes[OPCODE_BUFSIZE];
unsigned long prologue = regs->ip - PROLOGUE_SIZE;
if (copy_code(regs, opcodes, prologue, sizeof(opcodes))) {
printk("%sCode: Unable to access opcode bytes at RIP 0x%lx.\n",
loglvl, prologue);
} else {
printk("%sCode: %" __stringify(PROLOGUE_SIZE) "ph <%02x> %"
__stringify(EPILOGUE_SIZE) "ph\n", loglvl, opcodes,
opcodes[PROLOGUE_SIZE], opcodes + PROLOGUE_SIZE + 1);
}
}
void show_ip(struct pt_regs *regs, const char *loglvl)
{
#ifdef CONFIG_X86_32
printk("%sEIP: %pS\n", loglvl, (void *)regs->ip);
#else
printk("%sRIP: %04x:%pS\n", loglvl, (int)regs->cs, (void *)regs->ip);
#endif
show_opcodes(regs, loglvl);
}
void show_iret_regs(struct pt_regs *regs, const char *log_lvl)
{
show_ip(regs, log_lvl);
printk("%sRSP: %04x:%016lx EFLAGS: %08lx", log_lvl, (int)regs->ss,
regs->sp, regs->flags);
}
static void show_regs_if_on_stack(struct stack_info *info, struct pt_regs *regs,
bool partial, const char *log_lvl)
{
/*
* These on_stack() checks aren't strictly necessary: the unwind code
* has already validated the 'regs' pointer. The checks are done for
* ordering reasons: if the registers are on the next stack, we don't
* want to print them out yet. Otherwise they'll be shown as part of
* the wrong stack. Later, when show_trace_log_lvl() switches to the
* next stack, this function will be called again with the same regs so
* they can be printed in the right context.
*/
if (!partial && on_stack(info, regs, sizeof(*regs))) {
__show_regs(regs, SHOW_REGS_SHORT, log_lvl);
} else if (partial && on_stack(info, (void *)regs + IRET_FRAME_OFFSET,
IRET_FRAME_SIZE)) {
/*
* When an interrupt or exception occurs in entry code, the
* full pt_regs might not have been saved yet. In that case
* just print the iret frame.
*/
show_iret_regs(regs, log_lvl);
}
}
void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, const char *log_lvl)
{
struct unwind_state state;
struct stack_info stack_info = {0};
unsigned long visit_mask = 0;
int graph_idx = 0;
bool partial = false;
printk("%sCall Trace:\n", log_lvl);
unwind_start(&state, task, regs, stack);
stack = stack ? : get_stack_pointer(task, regs);
regs = unwind_get_entry_regs(&state, &partial);
/*
* Iterate through the stacks, starting with the current stack pointer.
* Each stack has a pointer to the next one.
*
* x86-64 can have several stacks:
* - task stack
* - interrupt stack
* - HW exception stacks (double fault, nmi, debug, mce)
* - entry stack
*
* x86-32 can have up to four stacks:
* - task stack
* - softirq stack
* - hardirq stack
* - entry stack
*/
for ( ; stack; stack = PTR_ALIGN(stack_info.next_sp, sizeof(long))) {
const char *stack_name;
if (get_stack_info(stack, task, &stack_info, &visit_mask)) {
/*
* We weren't on a valid stack. It's possible that
* we overflowed a valid stack into a guard page.
* See if the next page up is valid so that we can
* generate some kind of backtrace if this happens.
*/
stack = (unsigned long *)PAGE_ALIGN((unsigned long)stack);
if (get_stack_info(stack, task, &stack_info, &visit_mask))
break;
}
stack_name = stack_type_name(stack_info.type);
if (stack_name)
printk("%s <%s>\n", log_lvl, stack_name);
if (regs)
show_regs_if_on_stack(&stack_info, regs, partial, log_lvl);
/*
* Scan the stack, printing any text addresses we find. At the
* same time, follow proper stack frames with the unwinder.
*
* Addresses found during the scan which are not reported by
* the unwinder are considered to be additional clues which are
* sometimes useful for debugging and are prefixed with '?'.
* This also serves as a failsafe option in case the unwinder
* goes off in the weeds.
*/
for (; stack < stack_info.end; stack++) {
unsigned long real_addr;
int reliable = 0;
unsigned long addr = READ_ONCE_NOCHECK(*stack);
unsigned long *ret_addr_p =
unwind_get_return_address_ptr(&state);
if (!__kernel_text_address(addr))
continue;
/*
* Don't print regs->ip again if it was already printed
* by show_regs_if_on_stack().
*/
if (regs && stack == &regs->ip)
goto next;
if (stack == ret_addr_p)
reliable = 1;
/*
* When function graph tracing is enabled for a
* function, its return address on the stack is
* replaced with the address of an ftrace handler
* (return_to_handler). In that case, before printing
* the "real" address, we want to print the handler
* address as an "unreliable" hint that function graph
* tracing was involved.
*/
real_addr = ftrace_graph_ret_addr(task, &graph_idx,
addr, stack);
if (real_addr != addr)
printk_stack_address(addr, 0, log_lvl);
printk_stack_address(real_addr, reliable, log_lvl);
if (!reliable)
continue;
next:
/*
* Get the next frame from the unwinder. No need to
* check for an error: if anything goes wrong, the rest
* of the addresses will just be printed as unreliable.
*/
unwind_next_frame(&state);
/* if the frame has entry regs, print them */
regs = unwind_get_entry_regs(&state, &partial);
if (regs)
show_regs_if_on_stack(&stack_info, regs, partial, log_lvl);
}
if (stack_name)
printk("%s </%s>\n", log_lvl, stack_name);
}
}
void show_stack(struct task_struct *task, unsigned long *sp,
const char *loglvl)
{
task = task ? : current;
/*
* Stack frames below this one aren't interesting. Don't show them
* if we're printing for %current.
*/
if (!sp && task == current)
sp = get_stack_pointer(current, NULL);
show_trace_log_lvl(task, NULL, sp, loglvl);
}
void show_stack_regs(struct pt_regs *regs)
{
show_trace_log_lvl(current, regs, NULL, KERN_DEFAULT);
}
static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED;
static int die_owner = -1;
static unsigned int die_nest_count;
unsigned long oops_begin(void)
{
int cpu;
unsigned long flags;
oops_enter();
/* racy, but better than risking deadlock. */
raw_local_irq_save(flags);
cpu = smp_processor_id();
if (!arch_spin_trylock(&die_lock)) {
if (cpu == die_owner)
/* nested oops. should stop eventually */;
else
arch_spin_lock(&die_lock);
}
die_nest_count++;
die_owner = cpu;
console_verbose();
bust_spinlocks(1);
return flags;
}
NOKPROBE_SYMBOL(oops_begin);
void __noreturn rewind_stack_do_exit(int signr);
void oops_end(unsigned long flags, struct pt_regs *regs, int signr)
{
if (regs && kexec_should_crash(current))
crash_kexec(regs);
bust_spinlocks(0);
die_owner = -1;
add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
die_nest_count--;
if (!die_nest_count)
/* Nest count reaches zero, release the lock. */
arch_spin_unlock(&die_lock);
raw_local_irq_restore(flags);
oops_exit();
/* Executive summary in case the oops scrolled away */
__show_regs(&exec_summary_regs, SHOW_REGS_ALL, KERN_DEFAULT);
if (!signr)
return;
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
/*
* We're not going to return, but we might be on an IST stack or
* have very little stack space left. Rewind the stack and kill
* the task.
* Before we rewind the stack, we have to tell KASAN that we're going to
* reuse the task stack and that existing poisons are invalid.
*/
kasan_unpoison_task_stack(current);
rewind_stack_do_exit(signr);
}
NOKPROBE_SYMBOL(oops_end);
static void __die_header(const char *str, struct pt_regs *regs, long err)
{
const char *pr = "";
/* Save the regs of the first oops for the executive summary later. */
if (!die_counter)
exec_summary_regs = *regs;
if (IS_ENABLED(CONFIG_PREEMPTION))
pr = IS_ENABLED(CONFIG_PREEMPT_RT) ? " PREEMPT_RT" : " PREEMPT";
printk(KERN_DEFAULT
"%s: %04lx [#%d]%s%s%s%s%s\n", str, err & 0xffff, ++die_counter,
pr,
IS_ENABLED(CONFIG_SMP) ? " SMP" : "",
debug_pagealloc_enabled() ? " DEBUG_PAGEALLOC" : "",
IS_ENABLED(CONFIG_KASAN) ? " KASAN" : "",
IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION) ?
(boot_cpu_has(X86_FEATURE_PTI) ? " PTI" : " NOPTI") : "");
}
NOKPROBE_SYMBOL(__die_header);
static int __die_body(const char *str, struct pt_regs *regs, long err)
{
show_regs(regs);
print_modules();
if (notify_die(DIE_OOPS, str, regs, err,
current->thread.trap_nr, SIGSEGV) == NOTIFY_STOP)
return 1;
return 0;
}
NOKPROBE_SYMBOL(__die_body);
int __die(const char *str, struct pt_regs *regs, long err)
{
__die_header(str, regs, err);
return __die_body(str, regs, err);
}
NOKPROBE_SYMBOL(__die);
/*
* This is gone through when something in the kernel has done something bad
* and is about to be terminated:
*/
void die(const char *str, struct pt_regs *regs, long err)
{
unsigned long flags = oops_begin();
int sig = SIGSEGV;
if (__die(str, regs, err))
sig = 0;
oops_end(flags, regs, sig);
}
void die_addr(const char *str, struct pt_regs *regs, long err, long gp_addr)
{
unsigned long flags = oops_begin();
int sig = SIGSEGV;
__die_header(str, regs, err);
if (gp_addr)
kasan_non_canonical_hook(gp_addr);
if (__die_body(str, regs, err))
sig = 0;
oops_end(flags, regs, sig);
}
void show_regs(struct pt_regs *regs)
{
enum show_regs_mode print_kernel_regs;
show_regs_print_info(KERN_DEFAULT);
print_kernel_regs = user_mode(regs) ? SHOW_REGS_USER : SHOW_REGS_ALL;
__show_regs(regs, print_kernel_regs, KERN_DEFAULT);
/*
* When in-kernel, we also print out the stack at the time of the fault..
*/
if (!user_mode(regs))
show_trace_log_lvl(current, regs, NULL, KERN_DEFAULT);
}