linux/drivers/regulator/max77826-regulator.c
Rob Herring 045a44d4c9
regulator: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174930.4063320-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-14 20:52:54 +01:00

302 lines
7.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
//
// max77826-regulator.c - regulator driver for Maxim MAX77826
//
// Author: Iskren Chernev <iskren.chernev@gmail.com>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
enum max77826_registers {
MAX77826_REG_INT_SRC = 0x00,
MAX77826_REG_SYS_INT,
MAX77826_REG_INT1,
MAX77826_REG_INT2,
MAX77826_REG_BB_INT,
MAX77826_REG_INT_SRC_M,
MAX77826_REG_TOPSYS_INT_M,
MAX77826_REG_INT1_M,
MAX77826_REG_INT2_M,
MAX77826_REG_BB_INT_M,
MAX77826_REG_TOPSYS_STAT,
MAX77826_REG_STAT1,
MAX77826_REG_STAT2,
MAX77826_REG_BB_STAT,
/* 0x0E - 0x0F: Reserved */
MAX77826_REG_LDO_OPMD1 = 0x10,
MAX77826_REG_LDO_OPMD2,
MAX77826_REG_LDO_OPMD3,
MAX77826_REG_LDO_OPMD4,
MAX77826_REG_B_BB_OPMD,
/* 0x15 - 0x1F: Reserved */
MAX77826_REG_LDO1_CFG = 0x20,
MAX77826_REG_LDO2_CFG,
MAX77826_REG_LDO3_CFG,
MAX77826_REG_LDO4_CFG,
MAX77826_REG_LDO5_CFG,
MAX77826_REG_LDO6_CFG,
MAX77826_REG_LDO7_CFG,
MAX77826_REG_LDO8_CFG,
MAX77826_REG_LDO9_CFG,
MAX77826_REG_LDO10_CFG,
MAX77826_REG_LDO11_CFG,
MAX77826_REG_LDO12_CFG,
MAX77826_REG_LDO13_CFG,
MAX77826_REG_LDO14_CFG,
MAX77826_REG_LDO15_CFG,
/* 0x2F: Reserved */
MAX77826_REG_BUCK_CFG = 0x30,
MAX77826_REG_BUCK_VOUT,
MAX77826_REG_BB_CFG,
MAX77826_REG_BB_VOUT,
/* 0x34 - 0x3F: Reserved */
MAX77826_REG_BUCK_SS_FREQ = 0x40,
MAX77826_REG_UVLO_FALL,
/* 0x42 - 0xCE: Reserved */
MAX77826_REG_DEVICE_ID = 0xCF,
};
enum max77826_regulators {
MAX77826_LDO1 = 0,
MAX77826_LDO2,
MAX77826_LDO3,
MAX77826_LDO4,
MAX77826_LDO5,
MAX77826_LDO6,
MAX77826_LDO7,
MAX77826_LDO8,
MAX77826_LDO9,
MAX77826_LDO10,
MAX77826_LDO11,
MAX77826_LDO12,
MAX77826_LDO13,
MAX77826_LDO14,
MAX77826_LDO15,
MAX77826_BUCK,
MAX77826_BUCKBOOST,
MAX77826_MAX_REGULATORS,
};
#define MAX77826_MASK_LDO 0x7f
#define MAX77826_MASK_BUCK 0xff
#define MAX77826_MASK_BUCKBOOST 0x7f
#define MAX77826_BUCK_RAMP_DELAY 12500
/* values in mV */
/* for LDO1-3 */
#define MAX77826_NMOS_LDO_VOLT_MIN 600000
#define MAX77826_NMOS_LDO_VOLT_MAX 2187500
#define MAX77826_NMOS_LDO_VOLT_STEP 12500
/* for LDO4-15 */
#define MAX77826_PMOS_LDO_VOLT_MIN 800000
#define MAX77826_PMOS_LDO_VOLT_MAX 3975000
#define MAX77826_PMOS_LDO_VOLT_STEP 25000
/* for BUCK */
#define MAX77826_BUCK_VOLT_MIN 500000
#define MAX77826_BUCK_VOLT_MAX 1800000
#define MAX77826_BUCK_VOLT_STEP 6250
/* for BUCKBOOST */
#define MAX77826_BUCKBOOST_VOLT_MIN 2600000
#define MAX77826_BUCKBOOST_VOLT_MAX 4187500
#define MAX77826_BUCKBOOST_VOLT_STEP 12500
#define MAX77826_VOLT_RANGE(_type) \
((MAX77826_ ## _type ## _VOLT_MAX - \
MAX77826_ ## _type ## _VOLT_MIN) / \
MAX77826_ ## _type ## _VOLT_STEP + 1)
#define MAX77826_LDO(_id, _type) \
[MAX77826_LDO ## _id] = { \
.id = MAX77826_LDO ## _id, \
.name = "LDO"#_id, \
.of_match = of_match_ptr("LDO"#_id), \
.regulators_node = "regulators", \
.ops = &max77826_most_ops, \
.min_uV = MAX77826_ ## _type ## _LDO_VOLT_MIN, \
.uV_step = MAX77826_ ## _type ## _LDO_VOLT_STEP, \
.n_voltages = MAX77826_VOLT_RANGE(_type ## _LDO), \
.enable_reg = MAX77826_REG_LDO_OPMD1 + (_id - 1) / 4, \
.enable_mask = BIT(((_id - 1) % 4) * 2 + 1), \
.vsel_reg = MAX77826_REG_LDO1_CFG + (_id - 1), \
.vsel_mask = MAX77826_MASK_LDO, \
.owner = THIS_MODULE, \
}
#define MAX77826_BUCK(_idx, _id, _ops) \
[MAX77826_ ## _id] = { \
.id = MAX77826_ ## _id, \
.name = #_id, \
.of_match = of_match_ptr(#_id), \
.regulators_node = "regulators", \
.ops = &_ops, \
.min_uV = MAX77826_ ## _id ## _VOLT_MIN, \
.uV_step = MAX77826_ ## _id ## _VOLT_STEP, \
.n_voltages = MAX77826_VOLT_RANGE(_id), \
.enable_reg = MAX77826_REG_B_BB_OPMD, \
.enable_mask = BIT(_idx * 2 + 1), \
.vsel_reg = MAX77826_REG_BUCK_VOUT + _idx * 2, \
.vsel_mask = MAX77826_MASK_ ## _id, \
.owner = THIS_MODULE, \
}
struct max77826_regulator_info {
struct regmap *regmap;
struct regulator_desc *rdesc;
};
static const struct regmap_config max77826_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = MAX77826_REG_DEVICE_ID,
};
static int max77826_set_voltage_time_sel(struct regulator_dev *,
unsigned int old_selector,
unsigned int new_selector);
static const struct regulator_ops max77826_most_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
static const struct regulator_ops max77826_buck_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = max77826_set_voltage_time_sel,
};
static struct regulator_desc max77826_regulators_desc[] = {
MAX77826_LDO(1, NMOS),
MAX77826_LDO(2, NMOS),
MAX77826_LDO(3, NMOS),
MAX77826_LDO(4, PMOS),
MAX77826_LDO(5, PMOS),
MAX77826_LDO(6, PMOS),
MAX77826_LDO(7, PMOS),
MAX77826_LDO(8, PMOS),
MAX77826_LDO(9, PMOS),
MAX77826_LDO(10, PMOS),
MAX77826_LDO(11, PMOS),
MAX77826_LDO(12, PMOS),
MAX77826_LDO(13, PMOS),
MAX77826_LDO(14, PMOS),
MAX77826_LDO(15, PMOS),
MAX77826_BUCK(0, BUCK, max77826_buck_ops),
MAX77826_BUCK(1, BUCKBOOST, max77826_most_ops),
};
static int max77826_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
if (new_selector > old_selector) {
return DIV_ROUND_UP(MAX77826_BUCK_VOLT_STEP *
(new_selector - old_selector),
MAX77826_BUCK_RAMP_DELAY);
}
return 0;
}
static int max77826_read_device_id(struct regmap *regmap, struct device *dev)
{
unsigned int device_id;
int res;
res = regmap_read(regmap, MAX77826_REG_DEVICE_ID, &device_id);
if (!res)
dev_dbg(dev, "DEVICE_ID: 0x%x\n", device_id);
return res;
}
static int max77826_i2c_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct max77826_regulator_info *info;
struct regulator_config config = {};
struct regulator_dev *rdev;
struct regmap *regmap;
int i;
info = devm_kzalloc(dev, sizeof(struct max77826_regulator_info),
GFP_KERNEL);
if (!info)
return -ENOMEM;
info->rdesc = max77826_regulators_desc;
regmap = devm_regmap_init_i2c(client, &max77826_regmap_config);
if (IS_ERR(regmap)) {
dev_err(dev, "Failed to allocate regmap!\n");
return PTR_ERR(regmap);
}
info->regmap = regmap;
i2c_set_clientdata(client, info);
config.dev = dev;
config.regmap = regmap;
config.driver_data = info;
for (i = 0; i < MAX77826_MAX_REGULATORS; i++) {
rdev = devm_regulator_register(dev,
&max77826_regulators_desc[i],
&config);
if (IS_ERR(rdev)) {
dev_err(dev, "Failed to register regulator!\n");
return PTR_ERR(rdev);
}
}
return max77826_read_device_id(regmap, dev);
}
static const struct of_device_id __maybe_unused max77826_of_match[] = {
{ .compatible = "maxim,max77826" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, max77826_of_match);
static const struct i2c_device_id max77826_id[] = {
{ "max77826-regulator" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, max77826_id);
static struct i2c_driver max77826_regulator_driver = {
.driver = {
.name = "max77826",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(max77826_of_match),
},
.probe = max77826_i2c_probe,
.id_table = max77826_id,
};
module_i2c_driver(max77826_regulator_driver);
MODULE_AUTHOR("Iskren Chernev <iskren.chernev@gmail.com>");
MODULE_DESCRIPTION("MAX77826 PMIC regulator driver");
MODULE_LICENSE("GPL");