linux/drivers/ide/ide-lib.c
Bartlomiej Zolnierkiewicz 22aa4b32a1 ide: remove ide_task_t typedef
While at it:
- rename struct ide_task_s to struct ide_cmd
- remove stale comments from idedisk_{read_native,set}_max_address()
- drop unused 'cmd' argument from ide_{cmd,task}_ioctl()
- drop unused 'task' argument from tx4939ide_tf_load_fixup()
- rename ide_complete_task() to ide_complete_cmd()
- use consistent naming for struct ide_cmd variables

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:37 +01:00

184 lines
4.6 KiB
C

#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/ide.h>
#include <linux/bitops.h>
/**
* ide_toggle_bounce - handle bounce buffering
* @drive: drive to update
* @on: on/off boolean
*
* Enable or disable bounce buffering for the device. Drives move
* between PIO and DMA and that changes the rules we need.
*/
void ide_toggle_bounce(ide_drive_t *drive, int on)
{
u64 addr = BLK_BOUNCE_HIGH; /* dma64_addr_t */
if (!PCI_DMA_BUS_IS_PHYS) {
addr = BLK_BOUNCE_ANY;
} else if (on && drive->media == ide_disk) {
struct device *dev = drive->hwif->dev;
if (dev && dev->dma_mask)
addr = *dev->dma_mask;
}
if (drive->queue)
blk_queue_bounce_limit(drive->queue, addr);
}
static void ide_dump_opcode(ide_drive_t *drive)
{
struct request *rq = drive->hwif->rq;
struct ide_cmd *cmd = NULL;
if (!rq)
return;
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
cmd = rq->special;
printk(KERN_ERR "ide: failed opcode was: ");
if (cmd == NULL)
printk(KERN_CONT "unknown\n");
else
printk(KERN_CONT "0x%02x\n", cmd->tf.command);
}
u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48)
{
u32 high, low;
if (lba48)
high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) |
tf->hob_lbal;
else
high = tf->device & 0xf;
low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal;
return ((u64)high << 24) | low;
}
EXPORT_SYMBOL_GPL(ide_get_lba_addr);
static void ide_dump_sector(ide_drive_t *drive)
{
struct ide_cmd cmd;
struct ide_taskfile *tf = &cmd.tf;
u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
memset(&cmd, 0, sizeof(cmd));
if (lba48)
cmd.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_HOB_LBA |
IDE_TFLAG_LBA48;
else
cmd.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE;
drive->hwif->tp_ops->tf_read(drive, &cmd);
if (lba48 || (tf->device & ATA_LBA))
printk(KERN_CONT ", LBAsect=%llu",
(unsigned long long)ide_get_lba_addr(tf, lba48));
else
printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam,
tf->device & 0xf, tf->lbal);
}
static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
{
printk(KERN_ERR "{ ");
if (err & ATA_ABORTED)
printk(KERN_CONT "DriveStatusError ");
if (err & ATA_ICRC)
printk(KERN_CONT "%s",
(err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
if (err & ATA_UNC)
printk(KERN_CONT "UncorrectableError ");
if (err & ATA_IDNF)
printk(KERN_CONT "SectorIdNotFound ");
if (err & ATA_TRK0NF)
printk(KERN_CONT "TrackZeroNotFound ");
if (err & ATA_AMNF)
printk(KERN_CONT "AddrMarkNotFound ");
printk(KERN_CONT "}");
if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK ||
(err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) {
struct request *rq = drive->hwif->rq;
ide_dump_sector(drive);
if (rq)
printk(KERN_CONT ", sector=%llu",
(unsigned long long)rq->sector);
}
printk(KERN_CONT "\n");
}
static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
{
printk(KERN_ERR "{ ");
if (err & ATAPI_ILI)
printk(KERN_CONT "IllegalLengthIndication ");
if (err & ATAPI_EOM)
printk(KERN_CONT "EndOfMedia ");
if (err & ATA_ABORTED)
printk(KERN_CONT "AbortedCommand ");
if (err & ATA_MCR)
printk(KERN_CONT "MediaChangeRequested ");
if (err & ATAPI_LFS)
printk(KERN_CONT "LastFailedSense=0x%02x ",
(err & ATAPI_LFS) >> 4);
printk(KERN_CONT "}\n");
}
/**
* ide_dump_status - translate ATA/ATAPI error
* @drive: drive that status applies to
* @msg: text message to print
* @stat: status byte to decode
*
* Error reporting, in human readable form (luxurious, but a memory hog).
* Combines the drive name, message and status byte to provide a
* user understandable explanation of the device error.
*/
u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
{
u8 err = 0;
printk(KERN_ERR "%s: %s: status=0x%02x { ", drive->name, msg, stat);
if (stat & ATA_BUSY)
printk(KERN_CONT "Busy ");
else {
if (stat & ATA_DRDY)
printk(KERN_CONT "DriveReady ");
if (stat & ATA_DF)
printk(KERN_CONT "DeviceFault ");
if (stat & ATA_DSC)
printk(KERN_CONT "SeekComplete ");
if (stat & ATA_DRQ)
printk(KERN_CONT "DataRequest ");
if (stat & ATA_CORR)
printk(KERN_CONT "CorrectedError ");
if (stat & ATA_IDX)
printk(KERN_CONT "Index ");
if (stat & ATA_ERR)
printk(KERN_CONT "Error ");
}
printk(KERN_CONT "}\n");
if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) {
err = ide_read_error(drive);
printk(KERN_ERR "%s: %s: error=0x%02x ", drive->name, msg, err);
if (drive->media == ide_disk)
ide_dump_ata_error(drive, err);
else
ide_dump_atapi_error(drive, err);
}
ide_dump_opcode(drive);
return err;
}
EXPORT_SYMBOL(ide_dump_status);