linux/sound/soc/codecs/wm2000.c
Linus Torvalds f5a246eab9 Sound updates for 3.7-rc1
This contains pretty many small commits covering fairly large range of
 files in sound/ directory.  Partly because of additional API support
 and partly because of constantly developed ASoC and ARM stuff.
 
 Some highlights:
 
 - Introduced the helper function and documentation for exposing the
   channel map via control API, as discussed in Plumbers; most of PCI
   drivers are covered, will follow more drivers later
 
 - Most of drivers have been replaced with the new PM callbacks (if
   the bus is supported)
 
 - HD-audio controller got the support of runtime PM and the support of
   D3 clock-stop.  Also changing the power_save option in sysfs kicks
   off immediately to enable / disable the power-save mode.
 
 - Another significant code change in HD-audio is the rewrite of
   firmware loading code.  Other than that, most of changes in HD-audio
   are continued cleanups and standardization for the generic auto
   parser and bug fixes (HBR, device-specific fixups), in addition to
   the support of channel-map API.
 
 - Addition of ASoC bindings for the compressed API, used by the
   mid-x86 drivers.
 
 - Lots of cleanups and API refreshes for ASoC codec drivers and
   DaVinci.
 
 - Conversion of OMAP to dmaengine.
 
 - New machine driver for Wolfson Microelectronics Bells.
 
 - New CODEC driver for Wolfson Microelectronics WM0010.
 
 - Enhancements to the ux500 and wm2000 drivers
 
 - A new driver for DA9055 and the support for regulator bypass mode.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQcpeWAAoJEGwxgFQ9KSmkpi4P/2etDDz5aEkEHNa1l4xEmFcm
 ymiGTgjaalqpUAVbM/gYx9G59EFMEbzUl1BHAqE5La4wO/v9lNPb+VrdUo+B+NZ7
 WSxIPWcNqdinSuoSqyYPjoPMVnhs3EMtNOqmf4jm1JOvdqA+4rO29xQVAqK/5Gfu
 LpMOyPiRi5ODnbQ1BOIWwpKICioY/mLwGJudK3z0i/fYVA7gLub20f+w+sOjKIA4
 wmwQAMTjAR798Cg/tVy4fQmf4SLw+c2nIgGe/PD+2gVlGXLNKBrJfMonHPTbmwKu
 lmJO/EtnijNOnpbn6up7ryUQ9cSoZAUZOfdIOgmAeQgQ/LWR0f+zf2IQehSPwrul
 g6hqOnQI2DNN7ugT3cYVbYnsh56TjyhnxhhxZgkapqh706QkqHGyKJNMRetzuXmP
 1O//MnZJrFQWd6sOKLlTL2ZzRvnxEJcNVGaE6bbwZTfQMtPeo9l1842uIq1dLUtG
 VxZb/svKUkMXv4is1dwUYUkpDsKxsgMEmabmuovceGf2N7jj/irkXgqxf6LWkaY1
 JQ7ZFWUJyDzEMXRaFfzdGO15T532CfB84wvFX5xoPMwMste2AA7QuybFBVstXhKu
 AtKNDgRJFUTlnLIxydpPBWdWH3UJdEaFwwsSfuNKI8OmmGKhWC/aP83k4hzueu9H
 KYLvY/0ObMSMqiwh/ndQ
 =uNqD
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This contains pretty many small commits covering fairly large range of
  files in sound/ directory.  Partly because of additional API support
  and partly because of constantly developed ASoC and ARM stuff.

  Some highlights:

   - Introduced the helper function and documentation for exposing the
     channel map via control API, as discussed in Plumbers; most of PCI
     drivers are covered, will follow more drivers later

   - Most of drivers have been replaced with the new PM callbacks (if
     the bus is supported)

   - HD-audio controller got the support of runtime PM and the support
     of D3 clock-stop.  Also changing the power_save option in sysfs
     kicks off immediately to enable / disable the power-save mode.

   - Another significant code change in HD-audio is the rewrite of
     firmware loading code.  Other than that, most of changes in
     HD-audio are continued cleanups and standardization for the generic
     auto parser and bug fixes (HBR, device-specific fixups), in
     addition to the support of channel-map API.

   - Addition of ASoC bindings for the compressed API, used by the
     mid-x86 drivers.

   - Lots of cleanups and API refreshes for ASoC codec drivers and
     DaVinci.

   - Conversion of OMAP to dmaengine.

   - New machine driver for Wolfson Microelectronics Bells.

   - New CODEC driver for Wolfson Microelectronics WM0010.

   - Enhancements to the ux500 and wm2000 drivers

   - A new driver for DA9055 and the support for regulator bypass mode."

Fix up various arm soc header file reorg conflicts.

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits)
  ALSA: hda - Add new codec ALC283 ALC290 support
  ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls
  ALSA: hda - fix indices on boost volume on Conexant
  ALSA: aloop - add locking to timer access
  ALSA: hda - Fix hang caused by race during suspend.
  sound: Remove unnecessary semicolon
  ALSA: hda/realtek - Fix detection of ALC271X codec
  ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310
  ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event
  ALSA: hda - make a generic unsol event handler
  ASoC: codecs: Add DA9055 codec driver
  ASoC: eukrea-tlv320: Convert it to platform driver
  ALSA: ASoC: add DT bindings for CS4271
  ASoC: wm_hubs: Ensure volume updates are handled during class W startup
  ASoC: wm5110: Adding missing volume update bits
  ASoC: wm5110: Add OUT3R support
  ASoC: wm5110: Add AEC loopback support
  ASoC: wm5110: Rename EPOUT to HPOUT3
  ASoC: arizona: Add more clock rates
  ASoC: arizona: Add more DSP options for mixer input muxes
  ...
2012-10-09 07:07:14 +09:00

902 lines
22 KiB
C

/*
* wm2000.c -- WM2000 ALSA Soc Audio driver
*
* Copyright 2008-2011 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The download image for the WM2000 will be requested as
* 'wm2000_anc.bin' by default (overridable via platform data) at
* runtime and is expected to be in flat binary format. This is
* generated by Wolfson configuration tools and includes
* system-specific callibration information. If supplied as a
* sequence of ASCII-encoded hexidecimal bytes this can be converted
* into a flat binary with a command such as this on the command line:
*
* perl -e 'while (<>) { s/[\r\n]+// ; printf("%c", hex($_)); }'
* < file > wm2000_anc.bin
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/debugfs.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/wm2000.h>
#include "wm2000.h"
#define WM2000_NUM_SUPPLIES 3
static const char *wm2000_supplies[WM2000_NUM_SUPPLIES] = {
"SPKVDD",
"DBVDD",
"DCVDD",
};
enum wm2000_anc_mode {
ANC_ACTIVE = 0,
ANC_BYPASS = 1,
ANC_STANDBY = 2,
ANC_OFF = 3,
};
struct wm2000_priv {
struct i2c_client *i2c;
struct regmap *regmap;
struct regulator_bulk_data supplies[WM2000_NUM_SUPPLIES];
enum wm2000_anc_mode anc_mode;
unsigned int anc_active:1;
unsigned int anc_eng_ena:1;
unsigned int spk_ena:1;
unsigned int mclk_div:1;
unsigned int speech_clarity:1;
int anc_download_size;
char *anc_download;
};
static int wm2000_write(struct i2c_client *i2c, unsigned int reg,
unsigned int value)
{
struct wm2000_priv *wm2000 = i2c_get_clientdata(i2c);
return regmap_write(wm2000->regmap, reg, value);
}
static unsigned int wm2000_read(struct i2c_client *i2c, unsigned int r)
{
struct wm2000_priv *wm2000 = i2c_get_clientdata(i2c);
unsigned int val;
int ret;
ret = regmap_read(wm2000->regmap, r, &val);
if (ret < 0)
return -1;
return val;
}
static void wm2000_reset(struct wm2000_priv *wm2000)
{
struct i2c_client *i2c = wm2000->i2c;
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_CLR);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR);
wm2000_write(i2c, WM2000_REG_ID1, 0);
wm2000->anc_mode = ANC_OFF;
}
static int wm2000_poll_bit(struct i2c_client *i2c,
unsigned int reg, u8 mask)
{
int timeout = 4000;
int val;
val = wm2000_read(i2c, reg);
while (!(val & mask) && --timeout) {
msleep(1);
val = wm2000_read(i2c, reg);
}
if (timeout == 0)
return 0;
else
return 1;
}
static int wm2000_power_up(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
int ret;
BUG_ON(wm2000->anc_mode != ANC_OFF);
dev_dbg(&i2c->dev, "Beginning power up\n");
ret = regulator_bulk_enable(WM2000_NUM_SUPPLIES, wm2000->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
if (!wm2000->mclk_div) {
dev_dbg(&i2c->dev, "Disabling MCLK divider\n");
wm2000_write(i2c, WM2000_REG_SYS_CTL2,
WM2000_MCLK_DIV2_ENA_CLR);
} else {
dev_dbg(&i2c->dev, "Enabling MCLK divider\n");
wm2000_write(i2c, WM2000_REG_SYS_CTL2,
WM2000_MCLK_DIV2_ENA_SET);
}
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_CLR);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_SET);
/* Wait for ANC engine to become ready */
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "ANC engine failed to reset\n");
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_BOOT_COMPLETE)) {
dev_err(&i2c->dev, "ANC engine failed to initialise\n");
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -ETIMEDOUT;
}
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET);
/* Open code download of the data since it is the only bulk
* write we do. */
dev_dbg(&i2c->dev, "Downloading %d bytes\n",
wm2000->anc_download_size - 2);
ret = i2c_master_send(i2c, wm2000->anc_download,
wm2000->anc_download_size);
if (ret < 0) {
dev_err(&i2c->dev, "i2c_transfer() failed: %d\n", ret);
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return ret;
}
if (ret != wm2000->anc_download_size) {
dev_err(&i2c->dev, "i2c_transfer() failed, %d != %d\n",
ret, wm2000->anc_download_size);
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -EIO;
}
dev_dbg(&i2c->dev, "Download complete\n");
if (analogue) {
wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
}
ret = wm2000_read(i2c, WM2000_REG_SPEECH_CLARITY);
if (wm2000->speech_clarity)
ret &= ~WM2000_SPEECH_CLARITY;
else
ret |= WM2000_SPEECH_CLARITY;
wm2000_write(i2c, WM2000_REG_SPEECH_CLARITY, ret);
wm2000_write(i2c, WM2000_REG_SYS_START0, 0x33);
wm2000_write(i2c, WM2000_REG_SYS_START1, 0x02);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for device\n");
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -ETIMEDOUT;
}
dev_dbg(&i2c->dev, "ANC active\n");
if (analogue)
dev_dbg(&i2c->dev, "Analogue active\n");
wm2000->anc_mode = ANC_ACTIVE;
return 0;
}
static int wm2000_power_down(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
if (analogue) {
wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_POWER_DOWN);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_POWER_DOWN);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_POWER_DOWN_COMPLETE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC power down\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
dev_dbg(&i2c->dev, "powered off\n");
wm2000->anc_mode = ANC_OFF;
return 0;
}
static int wm2000_enter_bypass(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
BUG_ON(wm2000->anc_mode != ANC_ACTIVE);
if (analogue) {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_BYPASS_ENTRY);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_BYPASS_ENTRY);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev, "Timeout waiting for ANC disable\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
wm2000_write(i2c, WM2000_REG_SYS_CTL1, WM2000_SYS_STBY);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR);
wm2000->anc_mode = ANC_BYPASS;
dev_dbg(&i2c->dev, "bypass enabled\n");
return 0;
}
static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
BUG_ON(wm2000->anc_mode != ANC_BYPASS);
wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
if (analogue) {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
}
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
wm2000->anc_mode = ANC_ACTIVE;
dev_dbg(&i2c->dev, "MOUSE active\n");
return 0;
}
static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
BUG_ON(wm2000->anc_mode != ANC_ACTIVE);
if (analogue) {
wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev,
"Timed out waiting for ANC disable after 1ms\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev,
"Timed out waiting for standby\n");
return -ETIMEDOUT;
}
wm2000_write(i2c, WM2000_REG_SYS_CTL1, WM2000_SYS_STBY);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR);
wm2000->anc_mode = ANC_STANDBY;
dev_dbg(&i2c->dev, "standby\n");
if (analogue)
dev_dbg(&i2c->dev, "Analogue disabled\n");
return 0;
}
static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
BUG_ON(wm2000->anc_mode != ANC_STANDBY);
wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
if (analogue) {
wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
}
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
wm2000->anc_mode = ANC_ACTIVE;
dev_dbg(&i2c->dev, "MOUSE active\n");
if (analogue)
dev_dbg(&i2c->dev, "Analogue enabled\n");
return 0;
}
typedef int (*wm2000_mode_fn)(struct i2c_client *i2c, int analogue);
static struct {
enum wm2000_anc_mode source;
enum wm2000_anc_mode dest;
int analogue;
wm2000_mode_fn step[2];
} anc_transitions[] = {
{
.source = ANC_OFF,
.dest = ANC_ACTIVE,
.analogue = 1,
.step = {
wm2000_power_up,
},
},
{
.source = ANC_OFF,
.dest = ANC_STANDBY,
.step = {
wm2000_power_up,
wm2000_enter_standby,
},
},
{
.source = ANC_OFF,
.dest = ANC_BYPASS,
.analogue = 1,
.step = {
wm2000_power_up,
wm2000_enter_bypass,
},
},
{
.source = ANC_ACTIVE,
.dest = ANC_BYPASS,
.analogue = 1,
.step = {
wm2000_enter_bypass,
},
},
{
.source = ANC_ACTIVE,
.dest = ANC_STANDBY,
.analogue = 1,
.step = {
wm2000_enter_standby,
},
},
{
.source = ANC_ACTIVE,
.dest = ANC_OFF,
.analogue = 1,
.step = {
wm2000_power_down,
},
},
{
.source = ANC_BYPASS,
.dest = ANC_ACTIVE,
.analogue = 1,
.step = {
wm2000_exit_bypass,
},
},
{
.source = ANC_BYPASS,
.dest = ANC_STANDBY,
.analogue = 1,
.step = {
wm2000_exit_bypass,
wm2000_enter_standby,
},
},
{
.source = ANC_BYPASS,
.dest = ANC_OFF,
.step = {
wm2000_exit_bypass,
wm2000_power_down,
},
},
{
.source = ANC_STANDBY,
.dest = ANC_ACTIVE,
.analogue = 1,
.step = {
wm2000_exit_standby,
},
},
{
.source = ANC_STANDBY,
.dest = ANC_BYPASS,
.analogue = 1,
.step = {
wm2000_exit_standby,
wm2000_enter_bypass,
},
},
{
.source = ANC_STANDBY,
.dest = ANC_OFF,
.step = {
wm2000_exit_standby,
wm2000_power_down,
},
},
};
static int wm2000_anc_transition(struct wm2000_priv *wm2000,
enum wm2000_anc_mode mode)
{
struct i2c_client *i2c = wm2000->i2c;
int i, j;
int ret;
if (wm2000->anc_mode == mode)
return 0;
for (i = 0; i < ARRAY_SIZE(anc_transitions); i++)
if (anc_transitions[i].source == wm2000->anc_mode &&
anc_transitions[i].dest == mode)
break;
if (i == ARRAY_SIZE(anc_transitions)) {
dev_err(&i2c->dev, "No transition for %d->%d\n",
wm2000->anc_mode, mode);
return -EINVAL;
}
for (j = 0; j < ARRAY_SIZE(anc_transitions[j].step); j++) {
if (!anc_transitions[i].step[j])
break;
ret = anc_transitions[i].step[j](i2c,
anc_transitions[i].analogue);
if (ret != 0)
return ret;
}
return 0;
}
static int wm2000_anc_set_mode(struct wm2000_priv *wm2000)
{
struct i2c_client *i2c = wm2000->i2c;
enum wm2000_anc_mode mode;
if (wm2000->anc_eng_ena && wm2000->spk_ena)
if (wm2000->anc_active)
mode = ANC_ACTIVE;
else
mode = ANC_BYPASS;
else
mode = ANC_STANDBY;
dev_dbg(&i2c->dev, "Set mode %d (enabled %d, mute %d, active %d)\n",
mode, wm2000->anc_eng_ena, !wm2000->spk_ena,
wm2000->anc_active);
return wm2000_anc_transition(wm2000, mode);
}
static int wm2000_anc_mode_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
ucontrol->value.enumerated.item[0] = wm2000->anc_active;
return 0;
}
static int wm2000_anc_mode_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
int anc_active = ucontrol->value.enumerated.item[0];
if (anc_active > 1)
return -EINVAL;
wm2000->anc_active = anc_active;
return wm2000_anc_set_mode(wm2000);
}
static int wm2000_speaker_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
ucontrol->value.enumerated.item[0] = wm2000->spk_ena;
return 0;
}
static int wm2000_speaker_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
int val = ucontrol->value.enumerated.item[0];
if (val > 1)
return -EINVAL;
wm2000->spk_ena = val;
return wm2000_anc_set_mode(wm2000);
}
static const struct snd_kcontrol_new wm2000_controls[] = {
SOC_SINGLE_BOOL_EXT("WM2000 ANC Switch", 0,
wm2000_anc_mode_get,
wm2000_anc_mode_put),
SOC_SINGLE_BOOL_EXT("WM2000 Switch", 0,
wm2000_speaker_get,
wm2000_speaker_put),
};
static int wm2000_anc_power_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
if (SND_SOC_DAPM_EVENT_ON(event))
wm2000->anc_eng_ena = 1;
if (SND_SOC_DAPM_EVENT_OFF(event))
wm2000->anc_eng_ena = 0;
return wm2000_anc_set_mode(wm2000);
}
static const struct snd_soc_dapm_widget wm2000_dapm_widgets[] = {
/* Externally visible pins */
SND_SOC_DAPM_OUTPUT("SPKN"),
SND_SOC_DAPM_OUTPUT("SPKP"),
SND_SOC_DAPM_INPUT("LINN"),
SND_SOC_DAPM_INPUT("LINP"),
SND_SOC_DAPM_PGA_E("ANC Engine", SND_SOC_NOPM, 0, 0, NULL, 0,
wm2000_anc_power_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
};
/* Target, Path, Source */
static const struct snd_soc_dapm_route wm2000_audio_map[] = {
{ "SPKN", NULL, "ANC Engine" },
{ "SPKP", NULL, "ANC Engine" },
{ "ANC Engine", NULL, "LINN" },
{ "ANC Engine", NULL, "LINP" },
};
#ifdef CONFIG_PM
static int wm2000_suspend(struct snd_soc_codec *codec)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
return wm2000_anc_transition(wm2000, ANC_OFF);
}
static int wm2000_resume(struct snd_soc_codec *codec)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
return wm2000_anc_set_mode(wm2000);
}
#else
#define wm2000_suspend NULL
#define wm2000_resume NULL
#endif
static bool wm2000_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM2000_REG_SYS_START:
case WM2000_REG_SPEECH_CLARITY:
case WM2000_REG_SYS_WATCHDOG:
case WM2000_REG_ANA_VMID_PD_TIME:
case WM2000_REG_ANA_VMID_PU_TIME:
case WM2000_REG_CAT_FLTR_INDX:
case WM2000_REG_CAT_GAIN_0:
case WM2000_REG_SYS_STATUS:
case WM2000_REG_SYS_MODE_CNTRL:
case WM2000_REG_SYS_START0:
case WM2000_REG_SYS_START1:
case WM2000_REG_ID1:
case WM2000_REG_ID2:
case WM2000_REG_REVISON:
case WM2000_REG_SYS_CTL1:
case WM2000_REG_SYS_CTL2:
case WM2000_REG_ANC_STAT:
case WM2000_REG_IF_CTL:
return true;
default:
return false;
}
}
static const struct regmap_config wm2000_regmap = {
.reg_bits = 16,
.val_bits = 8,
.max_register = WM2000_REG_IF_CTL,
.readable_reg = wm2000_readable_reg,
};
static int wm2000_probe(struct snd_soc_codec *codec)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
/* This will trigger a transition to standby mode by default */
wm2000_anc_set_mode(wm2000);
return 0;
}
static int wm2000_remove(struct snd_soc_codec *codec)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
return wm2000_anc_transition(wm2000, ANC_OFF);
}
static struct snd_soc_codec_driver soc_codec_dev_wm2000 = {
.probe = wm2000_probe,
.remove = wm2000_remove,
.suspend = wm2000_suspend,
.resume = wm2000_resume,
.dapm_widgets = wm2000_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm2000_dapm_widgets),
.dapm_routes = wm2000_audio_map,
.num_dapm_routes = ARRAY_SIZE(wm2000_audio_map),
.controls = wm2000_controls,
.num_controls = ARRAY_SIZE(wm2000_controls),
};
static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *i2c_id)
{
struct wm2000_priv *wm2000;
struct wm2000_platform_data *pdata;
const char *filename;
const struct firmware *fw = NULL;
int ret, i;
int reg;
u16 id;
wm2000 = devm_kzalloc(&i2c->dev, sizeof(struct wm2000_priv),
GFP_KERNEL);
if (wm2000 == NULL) {
dev_err(&i2c->dev, "Unable to allocate private data\n");
return -ENOMEM;
}
dev_set_drvdata(&i2c->dev, wm2000);
wm2000->regmap = devm_regmap_init_i2c(i2c, &wm2000_regmap);
if (IS_ERR(wm2000->regmap)) {
ret = PTR_ERR(wm2000->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
goto out;
}
for (i = 0; i < WM2000_NUM_SUPPLIES; i++)
wm2000->supplies[i].supply = wm2000_supplies[i];
ret = devm_regulator_bulk_get(&i2c->dev, WM2000_NUM_SUPPLIES,
wm2000->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to get supplies: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(WM2000_NUM_SUPPLIES, wm2000->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
/* Verify that this is a WM2000 */
reg = wm2000_read(i2c, WM2000_REG_ID1);
id = reg << 8;
reg = wm2000_read(i2c, WM2000_REG_ID2);
id |= reg & 0xff;
if (id != 0x2000) {
dev_err(&i2c->dev, "Device is not a WM2000 - ID %x\n", id);
ret = -ENODEV;
goto err_supplies;
}
reg = wm2000_read(i2c, WM2000_REG_REVISON);
dev_info(&i2c->dev, "revision %c\n", reg + 'A');
filename = "wm2000_anc.bin";
pdata = dev_get_platdata(&i2c->dev);
if (pdata) {
wm2000->mclk_div = pdata->mclkdiv2;
wm2000->speech_clarity = !pdata->speech_enh_disable;
if (pdata->download_file)
filename = pdata->download_file;
}
ret = request_firmware(&fw, filename, &i2c->dev);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret);
goto err_supplies;
}
/* Pre-cook the concatenation of the register address onto the image */
wm2000->anc_download_size = fw->size + 2;
wm2000->anc_download = devm_kzalloc(&i2c->dev,
wm2000->anc_download_size,
GFP_KERNEL);
if (wm2000->anc_download == NULL) {
dev_err(&i2c->dev, "Out of memory\n");
ret = -ENOMEM;
goto err_supplies;
}
wm2000->anc_download[0] = 0x80;
wm2000->anc_download[1] = 0x00;
memcpy(wm2000->anc_download + 2, fw->data, fw->size);
wm2000->anc_eng_ena = 1;
wm2000->anc_active = 1;
wm2000->spk_ena = 1;
wm2000->i2c = i2c;
wm2000_reset(wm2000);
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0);
err_supplies:
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
out:
release_firmware(fw);
return ret;
}
static __devexit int wm2000_i2c_remove(struct i2c_client *i2c)
{
snd_soc_unregister_codec(&i2c->dev);
return 0;
}
static const struct i2c_device_id wm2000_i2c_id[] = {
{ "wm2000", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm2000_i2c_id);
static struct i2c_driver wm2000_i2c_driver = {
.driver = {
.name = "wm2000",
.owner = THIS_MODULE,
},
.probe = wm2000_i2c_probe,
.remove = __devexit_p(wm2000_i2c_remove),
.id_table = wm2000_i2c_id,
};
module_i2c_driver(wm2000_i2c_driver);
MODULE_DESCRIPTION("ASoC WM2000 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfonmicro.com>");
MODULE_LICENSE("GPL");