linux/drivers/thermal/thermal_core.c
Linus Torvalds 1ee2dcc224 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Mostly these are fixes for fallout due to merge window changes, as
  well as cures for problems that have been with us for a much longer
  period of time"

 1) Johannes Berg noticed two major deficiencies in our genetlink
    registration.  Some genetlink protocols we passing in constant
    counts for their ops array rather than something like
    ARRAY_SIZE(ops) or similar.  Also, some genetlink protocols were
    using fixed IDs for their multicast groups.

    We have to retain these fixed IDs to keep existing userland tools
    working, but reserve them so that other multicast groups used by
    other protocols can not possibly conflict.

    In dealing with these two problems, we actually now use less state
    management for genetlink operations and multicast groups.

 2) When configuring interface hardware timestamping, fix several
    drivers that simply do not validate that the hwtstamp_config value
    is one the driver actually supports.  From Ben Hutchings.

 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar.

 4) In dev_forward_skb(), set the skb->protocol in the right order
    relative to skb_scrub_packet().  From Alexei Starovoitov.

 5) Bridge erroneously fails to use the proper wrapper functions to make
    calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid.  Fix from Toshiaki
    Makita.

 6) When detaching a bridge port, make sure to flush all VLAN IDs to
    prevent them from leaking, also from Toshiaki Makita.

 7) Put in a compromise for TCP Small Queues so that deep queued devices
    that delay TX reclaim non-trivially don't have such a performance
    decrease.  One particularly problematic area is 802.11 AMPDU in
    wireless.  From Eric Dumazet.

 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts
    here.  Fix from Eric Dumzaet, reported by Dave Jones.

 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn.

10) When computing mergeable buffer sizes, virtio-net fails to take the
    virtio-net header into account.  From Michael Dalton.

11) Fix seqlock deadlock in ip4_datagram_connect() wrt.  statistic
    bumping, this one has been with us for a while.  From Eric Dumazet.

12) Fix NULL deref in the new TIPC fragmentation handling, from Erik
    Hugne.

13) 6lowpan bit used for traffic classification was wrong, from Jukka
    Rissanen.

14) macvlan has the same issue as normal vlans did wrt.  propagating LRO
    disabling down to the real device, fix it the same way.  From Michal
    Kubecek.

15) CPSW driver needs to soft reset all slaves during suspend, from
    Daniel Mack.

16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet.

17) The xen-netfront RX buffer refill timer isn't properly scheduled on
    partial RX allocation success, from Ma JieYue.

18) When ipv6 ping protocol support was added, the AF_INET6 protocol
    initialization cleanup path on failure was borked a little.  Fix
    from Vlad Yasevich.

19) If a socket disconnects during a read/recvmsg/recvfrom/etc that
    blocks we can do the wrong thing with the msg_name we write back to
    userspace.  From Hannes Frederic Sowa.  There is another fix in the
    works from Hannes which will prevent future problems of this nature.

20) Fix route leak in VTI tunnel transmit, from Fan Du.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
  genetlink: make multicast groups const, prevent abuse
  genetlink: pass family to functions using groups
  genetlink: add and use genl_set_err()
  genetlink: remove family pointer from genl_multicast_group
  genetlink: remove genl_unregister_mc_group()
  hsr: don't call genl_unregister_mc_group()
  quota/genetlink: use proper genetlink multicast APIs
  drop_monitor/genetlink: use proper genetlink multicast APIs
  genetlink: only pass array to genl_register_family_with_ops()
  tcp: don't update snd_nxt, when a socket is switched from repair mode
  atm: idt77252: fix dev refcnt leak
  xfrm: Release dst if this dst is improper for vti tunnel
  netlink: fix documentation typo in netlink_set_err()
  be2net: Delete secondary unicast MAC addresses during be_close
  be2net: Fix unconditional enabling of Rx interface options
  net, virtio_net: replace the magic value
  ping: prevent NULL pointer dereference on write to msg_name
  bnx2x: Prevent "timeout waiting for state X"
  bnx2x: prevent CFC attention
  bnx2x: Prevent panic during DMAE timeout
  ...
2013-11-19 15:50:47 -08:00

1772 lines
44 KiB
C

/*
* thermal.c - Generic Thermal Management Sysfs support.
*
* Copyright (C) 2008 Intel Corp
* Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
* Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/kdev_t.h>
#include <linux/idr.h>
#include <linux/thermal.h>
#include <linux/reboot.h>
#include <linux/string.h>
#include <net/netlink.h>
#include <net/genetlink.h>
#include "thermal_core.h"
#include "thermal_hwmon.h"
MODULE_AUTHOR("Zhang Rui");
MODULE_DESCRIPTION("Generic thermal management sysfs support");
MODULE_LICENSE("GPL v2");
static DEFINE_IDR(thermal_tz_idr);
static DEFINE_IDR(thermal_cdev_idr);
static DEFINE_MUTEX(thermal_idr_lock);
static LIST_HEAD(thermal_tz_list);
static LIST_HEAD(thermal_cdev_list);
static LIST_HEAD(thermal_governor_list);
static DEFINE_MUTEX(thermal_list_lock);
static DEFINE_MUTEX(thermal_governor_lock);
static struct thermal_governor *__find_governor(const char *name)
{
struct thermal_governor *pos;
list_for_each_entry(pos, &thermal_governor_list, governor_list)
if (!strnicmp(name, pos->name, THERMAL_NAME_LENGTH))
return pos;
return NULL;
}
int thermal_register_governor(struct thermal_governor *governor)
{
int err;
const char *name;
struct thermal_zone_device *pos;
if (!governor)
return -EINVAL;
mutex_lock(&thermal_governor_lock);
err = -EBUSY;
if (__find_governor(governor->name) == NULL) {
err = 0;
list_add(&governor->governor_list, &thermal_governor_list);
}
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_tz_list, node) {
if (pos->governor)
continue;
if (pos->tzp)
name = pos->tzp->governor_name;
else
name = DEFAULT_THERMAL_GOVERNOR;
if (!strnicmp(name, governor->name, THERMAL_NAME_LENGTH))
pos->governor = governor;
}
mutex_unlock(&thermal_list_lock);
mutex_unlock(&thermal_governor_lock);
return err;
}
void thermal_unregister_governor(struct thermal_governor *governor)
{
struct thermal_zone_device *pos;
if (!governor)
return;
mutex_lock(&thermal_governor_lock);
if (__find_governor(governor->name) == NULL)
goto exit;
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_tz_list, node) {
if (!strnicmp(pos->governor->name, governor->name,
THERMAL_NAME_LENGTH))
pos->governor = NULL;
}
mutex_unlock(&thermal_list_lock);
list_del(&governor->governor_list);
exit:
mutex_unlock(&thermal_governor_lock);
return;
}
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
int ret;
if (lock)
mutex_lock(lock);
ret = idr_alloc(idr, NULL, 0, 0, GFP_KERNEL);
if (lock)
mutex_unlock(lock);
if (unlikely(ret < 0))
return ret;
*id = ret;
return 0;
}
static void release_idr(struct idr *idr, struct mutex *lock, int id)
{
if (lock)
mutex_lock(lock);
idr_remove(idr, id);
if (lock)
mutex_unlock(lock);
}
int get_tz_trend(struct thermal_zone_device *tz, int trip)
{
enum thermal_trend trend;
if (tz->emul_temperature || !tz->ops->get_trend ||
tz->ops->get_trend(tz, trip, &trend)) {
if (tz->temperature > tz->last_temperature)
trend = THERMAL_TREND_RAISING;
else if (tz->temperature < tz->last_temperature)
trend = THERMAL_TREND_DROPPING;
else
trend = THERMAL_TREND_STABLE;
}
return trend;
}
EXPORT_SYMBOL(get_tz_trend);
struct thermal_instance *get_thermal_instance(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev, int trip)
{
struct thermal_instance *pos = NULL;
struct thermal_instance *target_instance = NULL;
mutex_lock(&tz->lock);
mutex_lock(&cdev->lock);
list_for_each_entry(pos, &tz->thermal_instances, tz_node) {
if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
target_instance = pos;
break;
}
}
mutex_unlock(&cdev->lock);
mutex_unlock(&tz->lock);
return target_instance;
}
EXPORT_SYMBOL(get_thermal_instance);
static void print_bind_err_msg(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev, int ret)
{
dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n",
tz->type, cdev->type, ret);
}
static void __bind(struct thermal_zone_device *tz, int mask,
struct thermal_cooling_device *cdev,
unsigned long *limits)
{
int i, ret;
for (i = 0; i < tz->trips; i++) {
if (mask & (1 << i)) {
unsigned long upper, lower;
upper = THERMAL_NO_LIMIT;
lower = THERMAL_NO_LIMIT;
if (limits) {
lower = limits[i * 2];
upper = limits[i * 2 + 1];
}
ret = thermal_zone_bind_cooling_device(tz, i, cdev,
upper, lower);
if (ret)
print_bind_err_msg(tz, cdev, ret);
}
}
}
static void __unbind(struct thermal_zone_device *tz, int mask,
struct thermal_cooling_device *cdev)
{
int i;
for (i = 0; i < tz->trips; i++)
if (mask & (1 << i))
thermal_zone_unbind_cooling_device(tz, i, cdev);
}
static void bind_cdev(struct thermal_cooling_device *cdev)
{
int i, ret;
const struct thermal_zone_params *tzp;
struct thermal_zone_device *pos = NULL;
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_tz_list, node) {
if (!pos->tzp && !pos->ops->bind)
continue;
if (pos->ops->bind) {
ret = pos->ops->bind(pos, cdev);
if (ret)
print_bind_err_msg(pos, cdev, ret);
continue;
}
tzp = pos->tzp;
if (!tzp || !tzp->tbp)
continue;
for (i = 0; i < tzp->num_tbps; i++) {
if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
continue;
if (tzp->tbp[i].match(pos, cdev))
continue;
tzp->tbp[i].cdev = cdev;
__bind(pos, tzp->tbp[i].trip_mask, cdev,
tzp->tbp[i].binding_limits);
}
}
mutex_unlock(&thermal_list_lock);
}
static void bind_tz(struct thermal_zone_device *tz)
{
int i, ret;
struct thermal_cooling_device *pos = NULL;
const struct thermal_zone_params *tzp = tz->tzp;
if (!tzp && !tz->ops->bind)
return;
mutex_lock(&thermal_list_lock);
/* If there is ops->bind, try to use ops->bind */
if (tz->ops->bind) {
list_for_each_entry(pos, &thermal_cdev_list, node) {
ret = tz->ops->bind(tz, pos);
if (ret)
print_bind_err_msg(tz, pos, ret);
}
goto exit;
}
if (!tzp || !tzp->tbp)
goto exit;
list_for_each_entry(pos, &thermal_cdev_list, node) {
for (i = 0; i < tzp->num_tbps; i++) {
if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
continue;
if (tzp->tbp[i].match(tz, pos))
continue;
tzp->tbp[i].cdev = pos;
__bind(tz, tzp->tbp[i].trip_mask, pos,
tzp->tbp[i].binding_limits);
}
}
exit:
mutex_unlock(&thermal_list_lock);
}
static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
int delay)
{
if (delay > 1000)
mod_delayed_work(system_freezable_wq, &tz->poll_queue,
round_jiffies(msecs_to_jiffies(delay)));
else if (delay)
mod_delayed_work(system_freezable_wq, &tz->poll_queue,
msecs_to_jiffies(delay));
else
cancel_delayed_work(&tz->poll_queue);
}
static void monitor_thermal_zone(struct thermal_zone_device *tz)
{
mutex_lock(&tz->lock);
if (tz->passive)
thermal_zone_device_set_polling(tz, tz->passive_delay);
else if (tz->polling_delay)
thermal_zone_device_set_polling(tz, tz->polling_delay);
else
thermal_zone_device_set_polling(tz, 0);
mutex_unlock(&tz->lock);
}
static void handle_non_critical_trips(struct thermal_zone_device *tz,
int trip, enum thermal_trip_type trip_type)
{
if (tz->governor)
tz->governor->throttle(tz, trip);
}
static void handle_critical_trips(struct thermal_zone_device *tz,
int trip, enum thermal_trip_type trip_type)
{
long trip_temp;
tz->ops->get_trip_temp(tz, trip, &trip_temp);
/* If we have not crossed the trip_temp, we do not care. */
if (tz->temperature < trip_temp)
return;
if (tz->ops->notify)
tz->ops->notify(tz, trip, trip_type);
if (trip_type == THERMAL_TRIP_CRITICAL) {
dev_emerg(&tz->device,
"critical temperature reached(%d C),shutting down\n",
tz->temperature / 1000);
orderly_poweroff(true);
}
}
static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
{
enum thermal_trip_type type;
tz->ops->get_trip_type(tz, trip, &type);
if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
handle_critical_trips(tz, trip, type);
else
handle_non_critical_trips(tz, trip, type);
/*
* Alright, we handled this trip successfully.
* So, start monitoring again.
*/
monitor_thermal_zone(tz);
}
/**
* thermal_zone_get_temp() - returns its the temperature of thermal zone
* @tz: a valid pointer to a struct thermal_zone_device
* @temp: a valid pointer to where to store the resulting temperature.
*
* When a valid thermal zone reference is passed, it will fetch its
* temperature and fill @temp.
*
* Return: On success returns 0, an error code otherwise
*/
int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
{
int ret = -EINVAL;
#ifdef CONFIG_THERMAL_EMULATION
int count;
unsigned long crit_temp = -1UL;
enum thermal_trip_type type;
#endif
if (!tz || IS_ERR(tz))
goto exit;
mutex_lock(&tz->lock);
ret = tz->ops->get_temp(tz, temp);
#ifdef CONFIG_THERMAL_EMULATION
if (!tz->emul_temperature)
goto skip_emul;
for (count = 0; count < tz->trips; count++) {
ret = tz->ops->get_trip_type(tz, count, &type);
if (!ret && type == THERMAL_TRIP_CRITICAL) {
ret = tz->ops->get_trip_temp(tz, count, &crit_temp);
break;
}
}
if (ret)
goto skip_emul;
if (*temp < crit_temp)
*temp = tz->emul_temperature;
skip_emul:
#endif
mutex_unlock(&tz->lock);
exit:
return ret;
}
EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
static void update_temperature(struct thermal_zone_device *tz)
{
long temp;
int ret;
ret = thermal_zone_get_temp(tz, &temp);
if (ret) {
dev_warn(&tz->device, "failed to read out thermal zone %d\n",
tz->id);
return;
}
mutex_lock(&tz->lock);
tz->last_temperature = tz->temperature;
tz->temperature = temp;
mutex_unlock(&tz->lock);
}
void thermal_zone_device_update(struct thermal_zone_device *tz)
{
int count;
update_temperature(tz);
for (count = 0; count < tz->trips; count++)
handle_thermal_trip(tz, count);
}
EXPORT_SYMBOL_GPL(thermal_zone_device_update);
static void thermal_zone_device_check(struct work_struct *work)
{
struct thermal_zone_device *tz = container_of(work, struct
thermal_zone_device,
poll_queue.work);
thermal_zone_device_update(tz);
}
/* sys I/F for thermal zone */
#define to_thermal_zone(_dev) \
container_of(_dev, struct thermal_zone_device, device)
static ssize_t
type_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%s\n", tz->type);
}
static ssize_t
temp_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
long temperature;
int ret;
ret = thermal_zone_get_temp(tz, &temperature);
if (ret)
return ret;
return sprintf(buf, "%ld\n", temperature);
}
static ssize_t
mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_device_mode mode;
int result;
if (!tz->ops->get_mode)
return -EPERM;
result = tz->ops->get_mode(tz, &mode);
if (result)
return result;
return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
: "disabled");
}
static ssize_t
mode_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int result;
if (!tz->ops->set_mode)
return -EPERM;
if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
else
result = -EINVAL;
if (result)
return result;
return count;
}
static ssize_t
trip_point_type_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_trip_type type;
int trip, result;
if (!tz->ops->get_trip_type)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
return -EINVAL;
result = tz->ops->get_trip_type(tz, trip, &type);
if (result)
return result;
switch (type) {
case THERMAL_TRIP_CRITICAL:
return sprintf(buf, "critical\n");
case THERMAL_TRIP_HOT:
return sprintf(buf, "hot\n");
case THERMAL_TRIP_PASSIVE:
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active\n");
default:
return sprintf(buf, "unknown\n");
}
}
static ssize_t
trip_point_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
unsigned long temperature;
if (!tz->ops->set_trip_temp)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
return -EINVAL;
if (kstrtoul(buf, 10, &temperature))
return -EINVAL;
ret = tz->ops->set_trip_temp(tz, trip, temperature);
return ret ? ret : count;
}
static ssize_t
trip_point_temp_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
long temperature;
if (!tz->ops->get_trip_temp)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
return -EINVAL;
ret = tz->ops->get_trip_temp(tz, trip, &temperature);
if (ret)
return ret;
return sprintf(buf, "%ld\n", temperature);
}
static ssize_t
trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
unsigned long temperature;
if (!tz->ops->set_trip_hyst)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
return -EINVAL;
if (kstrtoul(buf, 10, &temperature))
return -EINVAL;
/*
* We are not doing any check on the 'temperature' value
* here. The driver implementing 'set_trip_hyst' has to
* take care of this.
*/
ret = tz->ops->set_trip_hyst(tz, trip, temperature);
return ret ? ret : count;
}
static ssize_t
trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
unsigned long temperature;
if (!tz->ops->get_trip_hyst)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
return -EINVAL;
ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
return ret ? ret : sprintf(buf, "%ld\n", temperature);
}
static ssize_t
passive_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
struct thermal_cooling_device *cdev = NULL;
int state;
if (!sscanf(buf, "%d\n", &state))
return -EINVAL;
/* sanity check: values below 1000 millicelcius don't make sense
* and can cause the system to go into a thermal heart attack
*/
if (state && state < 1000)
return -EINVAL;
if (state && !tz->forced_passive) {
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
if (!strncmp("Processor", cdev->type,
sizeof("Processor")))
thermal_zone_bind_cooling_device(tz,
THERMAL_TRIPS_NONE, cdev,
THERMAL_NO_LIMIT,
THERMAL_NO_LIMIT);
}
mutex_unlock(&thermal_list_lock);
if (!tz->passive_delay)
tz->passive_delay = 1000;
} else if (!state && tz->forced_passive) {
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
if (!strncmp("Processor", cdev->type,
sizeof("Processor")))
thermal_zone_unbind_cooling_device(tz,
THERMAL_TRIPS_NONE,
cdev);
}
mutex_unlock(&thermal_list_lock);
tz->passive_delay = 0;
}
tz->forced_passive = state;
thermal_zone_device_update(tz);
return count;
}
static ssize_t
passive_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%d\n", tz->forced_passive);
}
static ssize_t
policy_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int ret = -EINVAL;
struct thermal_zone_device *tz = to_thermal_zone(dev);
struct thermal_governor *gov;
char name[THERMAL_NAME_LENGTH];
snprintf(name, sizeof(name), "%s", buf);
mutex_lock(&thermal_governor_lock);
gov = __find_governor(strim(name));
if (!gov)
goto exit;
tz->governor = gov;
ret = count;
exit:
mutex_unlock(&thermal_governor_lock);
return ret;
}
static ssize_t
policy_show(struct device *dev, struct device_attribute *devattr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%s\n", tz->governor->name);
}
#ifdef CONFIG_THERMAL_EMULATION
static ssize_t
emul_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int ret = 0;
unsigned long temperature;
if (kstrtoul(buf, 10, &temperature))
return -EINVAL;
if (!tz->ops->set_emul_temp) {
mutex_lock(&tz->lock);
tz->emul_temperature = temperature;
mutex_unlock(&tz->lock);
} else {
ret = tz->ops->set_emul_temp(tz, temperature);
}
return ret ? ret : count;
}
static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store);
#endif/*CONFIG_THERMAL_EMULATION*/
static DEVICE_ATTR(type, 0444, type_show, NULL);
static DEVICE_ATTR(temp, 0444, temp_show, NULL);
static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store);
static DEVICE_ATTR(policy, S_IRUGO | S_IWUSR, policy_show, policy_store);
/* sys I/F for cooling device */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
static ssize_t
thermal_cooling_device_type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
return sprintf(buf, "%s\n", cdev->type);
}
static ssize_t
thermal_cooling_device_max_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
ret = cdev->ops->get_max_state(cdev, &state);
if (ret)
return ret;
return sprintf(buf, "%ld\n", state);
}
static ssize_t
thermal_cooling_device_cur_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
ret = cdev->ops->get_cur_state(cdev, &state);
if (ret)
return ret;
return sprintf(buf, "%ld\n", state);
}
static ssize_t
thermal_cooling_device_cur_state_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int result;
if (!sscanf(buf, "%ld\n", &state))
return -EINVAL;
if ((long)state < 0)
return -EINVAL;
result = cdev->ops->set_cur_state(cdev, state);
if (result)
return result;
return count;
}
static struct device_attribute dev_attr_cdev_type =
__ATTR(type, 0444, thermal_cooling_device_type_show, NULL);
static DEVICE_ATTR(max_state, 0444,
thermal_cooling_device_max_state_show, NULL);
static DEVICE_ATTR(cur_state, 0644,
thermal_cooling_device_cur_state_show,
thermal_cooling_device_cur_state_store);
static ssize_t
thermal_cooling_device_trip_point_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_instance *instance;
instance =
container_of(attr, struct thermal_instance, attr);
if (instance->trip == THERMAL_TRIPS_NONE)
return sprintf(buf, "-1\n");
else
return sprintf(buf, "%d\n", instance->trip);
}
/* Device management */
/**
* thermal_zone_bind_cooling_device() - bind a cooling device to a thermal zone
* @tz: pointer to struct thermal_zone_device
* @trip: indicates which trip point the cooling devices is
* associated with in this thermal zone.
* @cdev: pointer to struct thermal_cooling_device
* @upper: the Maximum cooling state for this trip point.
* THERMAL_NO_LIMIT means no upper limit,
* and the cooling device can be in max_state.
* @lower: the Minimum cooling state can be used for this trip point.
* THERMAL_NO_LIMIT means no lower limit,
* and the cooling device can be in cooling state 0.
*
* This interface function bind a thermal cooling device to the certain trip
* point of a thermal zone device.
* This function is usually called in the thermal zone device .bind callback.
*
* Return: 0 on success, the proper error value otherwise.
*/
int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
int trip,
struct thermal_cooling_device *cdev,
unsigned long upper, unsigned long lower)
{
struct thermal_instance *dev;
struct thermal_instance *pos;
struct thermal_zone_device *pos1;
struct thermal_cooling_device *pos2;
unsigned long max_state;
int result;
if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
return -EINVAL;
list_for_each_entry(pos1, &thermal_tz_list, node) {
if (pos1 == tz)
break;
}
list_for_each_entry(pos2, &thermal_cdev_list, node) {
if (pos2 == cdev)
break;
}
if (tz != pos1 || cdev != pos2)
return -EINVAL;
cdev->ops->get_max_state(cdev, &max_state);
/* lower default 0, upper default max_state */
lower = lower == THERMAL_NO_LIMIT ? 0 : lower;
upper = upper == THERMAL_NO_LIMIT ? max_state : upper;
if (lower > upper || upper > max_state)
return -EINVAL;
dev =
kzalloc(sizeof(struct thermal_instance), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->tz = tz;
dev->cdev = cdev;
dev->trip = trip;
dev->upper = upper;
dev->lower = lower;
dev->target = THERMAL_NO_TARGET;
result = get_idr(&tz->idr, &tz->lock, &dev->id);
if (result)
goto free_mem;
sprintf(dev->name, "cdev%d", dev->id);
result =
sysfs_create_link(&tz->device.kobj, &cdev->device.kobj, dev->name);
if (result)
goto release_idr;
sprintf(dev->attr_name, "cdev%d_trip_point", dev->id);
sysfs_attr_init(&dev->attr.attr);
dev->attr.attr.name = dev->attr_name;
dev->attr.attr.mode = 0444;
dev->attr.show = thermal_cooling_device_trip_point_show;
result = device_create_file(&tz->device, &dev->attr);
if (result)
goto remove_symbol_link;
mutex_lock(&tz->lock);
mutex_lock(&cdev->lock);
list_for_each_entry(pos, &tz->thermal_instances, tz_node)
if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
result = -EEXIST;
break;
}
if (!result) {
list_add_tail(&dev->tz_node, &tz->thermal_instances);
list_add_tail(&dev->cdev_node, &cdev->thermal_instances);
}
mutex_unlock(&cdev->lock);
mutex_unlock(&tz->lock);
if (!result)
return 0;
device_remove_file(&tz->device, &dev->attr);
remove_symbol_link:
sysfs_remove_link(&tz->device.kobj, dev->name);
release_idr:
release_idr(&tz->idr, &tz->lock, dev->id);
free_mem:
kfree(dev);
return result;
}
EXPORT_SYMBOL_GPL(thermal_zone_bind_cooling_device);
/**
* thermal_zone_unbind_cooling_device() - unbind a cooling device from a
* thermal zone.
* @tz: pointer to a struct thermal_zone_device.
* @trip: indicates which trip point the cooling devices is
* associated with in this thermal zone.
* @cdev: pointer to a struct thermal_cooling_device.
*
* This interface function unbind a thermal cooling device from the certain
* trip point of a thermal zone device.
* This function is usually called in the thermal zone device .unbind callback.
*
* Return: 0 on success, the proper error value otherwise.
*/
int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
int trip,
struct thermal_cooling_device *cdev)
{
struct thermal_instance *pos, *next;
mutex_lock(&tz->lock);
mutex_lock(&cdev->lock);
list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) {
if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
list_del(&pos->tz_node);
list_del(&pos->cdev_node);
mutex_unlock(&cdev->lock);
mutex_unlock(&tz->lock);
goto unbind;
}
}
mutex_unlock(&cdev->lock);
mutex_unlock(&tz->lock);
return -ENODEV;
unbind:
device_remove_file(&tz->device, &pos->attr);
sysfs_remove_link(&tz->device.kobj, pos->name);
release_idr(&tz->idr, &tz->lock, pos->id);
kfree(pos);
return 0;
}
EXPORT_SYMBOL_GPL(thermal_zone_unbind_cooling_device);
static void thermal_release(struct device *dev)
{
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
if (!strncmp(dev_name(dev), "thermal_zone",
sizeof("thermal_zone") - 1)) {
tz = to_thermal_zone(dev);
kfree(tz);
} else if(!strncmp(dev_name(dev), "cooling_device",
sizeof("cooling_device") - 1)){
cdev = to_cooling_device(dev);
kfree(cdev);
}
}
static struct class thermal_class = {
.name = "thermal",
.dev_release = thermal_release,
};
/**
* thermal_cooling_device_register() - register a new thermal cooling device
* @type: the thermal cooling device type.
* @devdata: device private data.
* @ops: standard thermal cooling devices callbacks.
*
* This interface function adds a new thermal cooling device (fan/processor/...)
* to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
* to all the thermal zone devices registered at the same time.
*
* Return: a pointer to the created struct thermal_cooling_device or an
* ERR_PTR. Caller must check return value with IS_ERR*() helpers.
*/
struct thermal_cooling_device *
thermal_cooling_device_register(char *type, void *devdata,
const struct thermal_cooling_device_ops *ops)
{
struct thermal_cooling_device *cdev;
int result;
if (type && strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
if (!ops || !ops->get_max_state || !ops->get_cur_state ||
!ops->set_cur_state)
return ERR_PTR(-EINVAL);
cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL);
if (!cdev)
return ERR_PTR(-ENOMEM);
result = get_idr(&thermal_cdev_idr, &thermal_idr_lock, &cdev->id);
if (result) {
kfree(cdev);
return ERR_PTR(result);
}
strlcpy(cdev->type, type ? : "", sizeof(cdev->type));
mutex_init(&cdev->lock);
INIT_LIST_HEAD(&cdev->thermal_instances);
cdev->ops = ops;
cdev->updated = true;
cdev->device.class = &thermal_class;
cdev->devdata = devdata;
dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
result = device_register(&cdev->device);
if (result) {
release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
kfree(cdev);
return ERR_PTR(result);
}
/* sys I/F */
if (type) {
result = device_create_file(&cdev->device, &dev_attr_cdev_type);
if (result)
goto unregister;
}
result = device_create_file(&cdev->device, &dev_attr_max_state);
if (result)
goto unregister;
result = device_create_file(&cdev->device, &dev_attr_cur_state);
if (result)
goto unregister;
/* Add 'this' new cdev to the global cdev list */
mutex_lock(&thermal_list_lock);
list_add(&cdev->node, &thermal_cdev_list);
mutex_unlock(&thermal_list_lock);
/* Update binding information for 'this' new cdev */
bind_cdev(cdev);
return cdev;
unregister:
release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
device_unregister(&cdev->device);
return ERR_PTR(result);
}
EXPORT_SYMBOL_GPL(thermal_cooling_device_register);
/**
* thermal_cooling_device_unregister - removes the registered thermal cooling device
* @cdev: the thermal cooling device to remove.
*
* thermal_cooling_device_unregister() must be called when the device is no
* longer needed.
*/
void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
{
int i;
const struct thermal_zone_params *tzp;
struct thermal_zone_device *tz;
struct thermal_cooling_device *pos = NULL;
if (!cdev)
return;
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_cdev_list, node)
if (pos == cdev)
break;
if (pos != cdev) {
/* thermal cooling device not found */
mutex_unlock(&thermal_list_lock);
return;
}
list_del(&cdev->node);
/* Unbind all thermal zones associated with 'this' cdev */
list_for_each_entry(tz, &thermal_tz_list, node) {
if (tz->ops->unbind) {
tz->ops->unbind(tz, cdev);
continue;
}
if (!tz->tzp || !tz->tzp->tbp)
continue;
tzp = tz->tzp;
for (i = 0; i < tzp->num_tbps; i++) {
if (tzp->tbp[i].cdev == cdev) {
__unbind(tz, tzp->tbp[i].trip_mask, cdev);
tzp->tbp[i].cdev = NULL;
}
}
}
mutex_unlock(&thermal_list_lock);
if (cdev->type[0])
device_remove_file(&cdev->device, &dev_attr_cdev_type);
device_remove_file(&cdev->device, &dev_attr_max_state);
device_remove_file(&cdev->device, &dev_attr_cur_state);
release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
device_unregister(&cdev->device);
return;
}
EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister);
void thermal_cdev_update(struct thermal_cooling_device *cdev)
{
struct thermal_instance *instance;
unsigned long target = 0;
/* cooling device is updated*/
if (cdev->updated)
return;
mutex_lock(&cdev->lock);
/* Make sure cdev enters the deepest cooling state */
list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
if (instance->target == THERMAL_NO_TARGET)
continue;
if (instance->target > target)
target = instance->target;
}
mutex_unlock(&cdev->lock);
cdev->ops->set_cur_state(cdev, target);
cdev->updated = true;
}
EXPORT_SYMBOL(thermal_cdev_update);
/**
* thermal_notify_framework - Sensor drivers use this API to notify framework
* @tz: thermal zone device
* @trip: indicates which trip point has been crossed
*
* This function handles the trip events from sensor drivers. It starts
* throttling the cooling devices according to the policy configured.
* For CRITICAL and HOT trip points, this notifies the respective drivers,
* and does actual throttling for other trip points i.e ACTIVE and PASSIVE.
* The throttling policy is based on the configured platform data; if no
* platform data is provided, this uses the step_wise throttling policy.
*/
void thermal_notify_framework(struct thermal_zone_device *tz, int trip)
{
handle_thermal_trip(tz, trip);
}
EXPORT_SYMBOL_GPL(thermal_notify_framework);
/**
* create_trip_attrs() - create attributes for trip points
* @tz: the thermal zone device
* @mask: Writeable trip point bitmap.
*
* helper function to instantiate sysfs entries for every trip
* point and its properties of a struct thermal_zone_device.
*
* Return: 0 on success, the proper error value otherwise.
*/
static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
{
int indx;
int size = sizeof(struct thermal_attr) * tz->trips;
tz->trip_type_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_type_attrs)
return -ENOMEM;
tz->trip_temp_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_temp_attrs) {
kfree(tz->trip_type_attrs);
return -ENOMEM;
}
if (tz->ops->get_trip_hyst) {
tz->trip_hyst_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_hyst_attrs) {
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
return -ENOMEM;
}
}
for (indx = 0; indx < tz->trips; indx++) {
/* create trip type attribute */
snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_type", indx);
sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
tz->trip_type_attrs[indx].attr.attr.name =
tz->trip_type_attrs[indx].name;
tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
device_create_file(&tz->device,
&tz->trip_type_attrs[indx].attr);
/* create trip temp attribute */
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_temp", indx);
sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
tz->trip_temp_attrs[indx].attr.attr.name =
tz->trip_temp_attrs[indx].name;
tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
if (mask & (1 << indx)) {
tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_temp_attrs[indx].attr.store =
trip_point_temp_store;
}
device_create_file(&tz->device,
&tz->trip_temp_attrs[indx].attr);
/* create Optional trip hyst attribute */
if (!tz->ops->get_trip_hyst)
continue;
snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_hyst", indx);
sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
tz->trip_hyst_attrs[indx].attr.attr.name =
tz->trip_hyst_attrs[indx].name;
tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
if (tz->ops->set_trip_hyst) {
tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_hyst_attrs[indx].attr.store =
trip_point_hyst_store;
}
device_create_file(&tz->device,
&tz->trip_hyst_attrs[indx].attr);
}
return 0;
}
static void remove_trip_attrs(struct thermal_zone_device *tz)
{
int indx;
for (indx = 0; indx < tz->trips; indx++) {
device_remove_file(&tz->device,
&tz->trip_type_attrs[indx].attr);
device_remove_file(&tz->device,
&tz->trip_temp_attrs[indx].attr);
if (tz->ops->get_trip_hyst)
device_remove_file(&tz->device,
&tz->trip_hyst_attrs[indx].attr);
}
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
kfree(tz->trip_hyst_attrs);
}
/**
* thermal_zone_device_register() - register a new thermal zone device
* @type: the thermal zone device type
* @trips: the number of trip points the thermal zone support
* @mask: a bit string indicating the writeablility of trip points
* @devdata: private device data
* @ops: standard thermal zone device callbacks
* @tzp: thermal zone platform parameters
* @passive_delay: number of milliseconds to wait between polls when
* performing passive cooling
* @polling_delay: number of milliseconds to wait between polls when checking
* whether trip points have been crossed (0 for interrupt
* driven systems)
*
* This interface function adds a new thermal zone device (sensor) to
* /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
* thermal cooling devices registered at the same time.
* thermal_zone_device_unregister() must be called when the device is no
* longer needed. The passive cooling depends on the .get_trend() return value.
*
* Return: a pointer to the created struct thermal_zone_device or an
* in case of error, an ERR_PTR. Caller must check return value with
* IS_ERR*() helpers.
*/
struct thermal_zone_device *thermal_zone_device_register(const char *type,
int trips, int mask, void *devdata,
const struct thermal_zone_device_ops *ops,
const struct thermal_zone_params *tzp,
int passive_delay, int polling_delay)
{
struct thermal_zone_device *tz;
enum thermal_trip_type trip_type;
int result;
int count;
int passive = 0;
if (type && strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips)
return ERR_PTR(-EINVAL);
if (!ops || !ops->get_temp)
return ERR_PTR(-EINVAL);
if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
return ERR_PTR(-EINVAL);
tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL);
if (!tz)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&tz->thermal_instances);
idr_init(&tz->idr);
mutex_init(&tz->lock);
result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id);
if (result) {
kfree(tz);
return ERR_PTR(result);
}
strlcpy(tz->type, type ? : "", sizeof(tz->type));
tz->ops = ops;
tz->tzp = tzp;
tz->device.class = &thermal_class;
tz->devdata = devdata;
tz->trips = trips;
tz->passive_delay = passive_delay;
tz->polling_delay = polling_delay;
dev_set_name(&tz->device, "thermal_zone%d", tz->id);
result = device_register(&tz->device);
if (result) {
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
kfree(tz);
return ERR_PTR(result);
}
/* sys I/F */
if (type) {
result = device_create_file(&tz->device, &dev_attr_type);
if (result)
goto unregister;
}
result = device_create_file(&tz->device, &dev_attr_temp);
if (result)
goto unregister;
if (ops->get_mode) {
result = device_create_file(&tz->device, &dev_attr_mode);
if (result)
goto unregister;
}
result = create_trip_attrs(tz, mask);
if (result)
goto unregister;
for (count = 0; count < trips; count++) {
tz->ops->get_trip_type(tz, count, &trip_type);
if (trip_type == THERMAL_TRIP_PASSIVE)
passive = 1;
}
if (!passive) {
result = device_create_file(&tz->device, &dev_attr_passive);
if (result)
goto unregister;
}
#ifdef CONFIG_THERMAL_EMULATION
result = device_create_file(&tz->device, &dev_attr_emul_temp);
if (result)
goto unregister;
#endif
/* Create policy attribute */
result = device_create_file(&tz->device, &dev_attr_policy);
if (result)
goto unregister;
/* Update 'this' zone's governor information */
mutex_lock(&thermal_governor_lock);
if (tz->tzp)
tz->governor = __find_governor(tz->tzp->governor_name);
else
tz->governor = __find_governor(DEFAULT_THERMAL_GOVERNOR);
mutex_unlock(&thermal_governor_lock);
if (!tz->tzp || !tz->tzp->no_hwmon) {
result = thermal_add_hwmon_sysfs(tz);
if (result)
goto unregister;
}
mutex_lock(&thermal_list_lock);
list_add_tail(&tz->node, &thermal_tz_list);
mutex_unlock(&thermal_list_lock);
/* Bind cooling devices for this zone */
bind_tz(tz);
INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
thermal_zone_device_update(tz);
if (!result)
return tz;
unregister:
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
device_unregister(&tz->device);
return ERR_PTR(result);
}
EXPORT_SYMBOL_GPL(thermal_zone_device_register);
/**
* thermal_device_unregister - removes the registered thermal zone device
* @tz: the thermal zone device to remove
*/
void thermal_zone_device_unregister(struct thermal_zone_device *tz)
{
int i;
const struct thermal_zone_params *tzp;
struct thermal_cooling_device *cdev;
struct thermal_zone_device *pos = NULL;
if (!tz)
return;
tzp = tz->tzp;
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_tz_list, node)
if (pos == tz)
break;
if (pos != tz) {
/* thermal zone device not found */
mutex_unlock(&thermal_list_lock);
return;
}
list_del(&tz->node);
/* Unbind all cdevs associated with 'this' thermal zone */
list_for_each_entry(cdev, &thermal_cdev_list, node) {
if (tz->ops->unbind) {
tz->ops->unbind(tz, cdev);
continue;
}
if (!tzp || !tzp->tbp)
break;
for (i = 0; i < tzp->num_tbps; i++) {
if (tzp->tbp[i].cdev == cdev) {
__unbind(tz, tzp->tbp[i].trip_mask, cdev);
tzp->tbp[i].cdev = NULL;
}
}
}
mutex_unlock(&thermal_list_lock);
thermal_zone_device_set_polling(tz, 0);
if (tz->type[0])
device_remove_file(&tz->device, &dev_attr_type);
device_remove_file(&tz->device, &dev_attr_temp);
if (tz->ops->get_mode)
device_remove_file(&tz->device, &dev_attr_mode);
device_remove_file(&tz->device, &dev_attr_policy);
remove_trip_attrs(tz);
tz->governor = NULL;
thermal_remove_hwmon_sysfs(tz);
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
idr_destroy(&tz->idr);
mutex_destroy(&tz->lock);
device_unregister(&tz->device);
return;
}
EXPORT_SYMBOL_GPL(thermal_zone_device_unregister);
/**
* thermal_zone_get_zone_by_name() - search for a zone and returns its ref
* @name: thermal zone name to fetch the temperature
*
* When only one zone is found with the passed name, returns a reference to it.
*
* Return: On success returns a reference to an unique thermal zone with
* matching name equals to @name, an ERR_PTR otherwise (-EINVAL for invalid
* paramenters, -ENODEV for not found and -EEXIST for multiple matches).
*/
struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name)
{
struct thermal_zone_device *pos = NULL, *ref = ERR_PTR(-EINVAL);
unsigned int found = 0;
if (!name)
goto exit;
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_tz_list, node)
if (!strnicmp(name, pos->type, THERMAL_NAME_LENGTH)) {
found++;
ref = pos;
}
mutex_unlock(&thermal_list_lock);
/* nothing has been found, thus an error code for it */
if (found == 0)
ref = ERR_PTR(-ENODEV);
else if (found > 1)
/* Success only when an unique zone is found */
ref = ERR_PTR(-EEXIST);
exit:
return ref;
}
EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name);
#ifdef CONFIG_NET
static const struct genl_multicast_group thermal_event_mcgrps[] = {
{ .name = THERMAL_GENL_MCAST_GROUP_NAME, },
};
static struct genl_family thermal_event_genl_family = {
.id = GENL_ID_GENERATE,
.name = THERMAL_GENL_FAMILY_NAME,
.version = THERMAL_GENL_VERSION,
.maxattr = THERMAL_GENL_ATTR_MAX,
.mcgrps = thermal_event_mcgrps,
.n_mcgrps = ARRAY_SIZE(thermal_event_mcgrps),
};
int thermal_generate_netlink_event(struct thermal_zone_device *tz,
enum events event)
{
struct sk_buff *skb;
struct nlattr *attr;
struct thermal_genl_event *thermal_event;
void *msg_header;
int size;
int result;
static unsigned int thermal_event_seqnum;
if (!tz)
return -EINVAL;
/* allocate memory */
size = nla_total_size(sizeof(struct thermal_genl_event)) +
nla_total_size(0);
skb = genlmsg_new(size, GFP_ATOMIC);
if (!skb)
return -ENOMEM;
/* add the genetlink message header */
msg_header = genlmsg_put(skb, 0, thermal_event_seqnum++,
&thermal_event_genl_family, 0,
THERMAL_GENL_CMD_EVENT);
if (!msg_header) {
nlmsg_free(skb);
return -ENOMEM;
}
/* fill the data */
attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT,
sizeof(struct thermal_genl_event));
if (!attr) {
nlmsg_free(skb);
return -EINVAL;
}
thermal_event = nla_data(attr);
if (!thermal_event) {
nlmsg_free(skb);
return -EINVAL;
}
memset(thermal_event, 0, sizeof(struct thermal_genl_event));
thermal_event->orig = tz->id;
thermal_event->event = event;
/* send multicast genetlink message */
result = genlmsg_end(skb, msg_header);
if (result < 0) {
nlmsg_free(skb);
return result;
}
result = genlmsg_multicast(&thermal_event_genl_family, skb, 0,
0, GFP_ATOMIC);
if (result)
dev_err(&tz->device, "Failed to send netlink event:%d", result);
return result;
}
EXPORT_SYMBOL_GPL(thermal_generate_netlink_event);
static int genetlink_init(void)
{
return genl_register_family(&thermal_event_genl_family);
}
static void genetlink_exit(void)
{
genl_unregister_family(&thermal_event_genl_family);
}
#else /* !CONFIG_NET */
static inline int genetlink_init(void) { return 0; }
static inline void genetlink_exit(void) {}
#endif /* !CONFIG_NET */
static int __init thermal_register_governors(void)
{
int result;
result = thermal_gov_step_wise_register();
if (result)
return result;
result = thermal_gov_fair_share_register();
if (result)
return result;
return thermal_gov_user_space_register();
}
static void thermal_unregister_governors(void)
{
thermal_gov_step_wise_unregister();
thermal_gov_fair_share_unregister();
thermal_gov_user_space_unregister();
}
static int __init thermal_init(void)
{
int result;
result = thermal_register_governors();
if (result)
goto error;
result = class_register(&thermal_class);
if (result)
goto unregister_governors;
result = genetlink_init();
if (result)
goto unregister_class;
return 0;
unregister_governors:
thermal_unregister_governors();
unregister_class:
class_unregister(&thermal_class);
error:
idr_destroy(&thermal_tz_idr);
idr_destroy(&thermal_cdev_idr);
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
mutex_destroy(&thermal_governor_lock);
return result;
}
static void __exit thermal_exit(void)
{
genetlink_exit();
class_unregister(&thermal_class);
thermal_unregister_governors();
idr_destroy(&thermal_tz_idr);
idr_destroy(&thermal_cdev_idr);
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
mutex_destroy(&thermal_governor_lock);
}
fs_initcall(thermal_init);
module_exit(thermal_exit);