linux/arch/arm/plat-samsung/s5p-irq-gpioint.c
Eunki Kim 453e2dd768 ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip
When a device uses GPIO interrupt, its driver assumes that GPIO
should be INPUT mode. However, GPIO of SAMSUNG SoC is sepated to
INPUT mode and INTERRUPT mode. They are set by 0x0 and 0xF in GPIO
control register. If the register is set to INPUT mode, the
interrupt never occur. Therefore, it's necessary to set INTERRUPT
mode instead of INPUT mode when the pin is used for GPIO interrupt.

This patch inserts the bitmap_gpio_int member in struct samsung_
gpio_chip in order to represent use of GPIO interrupt for each pin
and sets the related bit when s5p_register_gpio_interrupt function
is called.

Signed-off-by: Eunki Kim <eunki_kim@samsung.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-23 22:39:33 +09:00

220 lines
5.5 KiB
C

/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Author: Kyungmin Park <kyungmin.park@samsung.com>
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
* Author: Marek Szyprowski <m.szyprowski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <mach/map.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <asm/mach/irq.h>
#define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u))
#define CON_OFFSET 0x700
#define MASK_OFFSET 0x900
#define PEND_OFFSET 0xA00
#define REG_OFFSET(x) ((x) << 2)
struct s5p_gpioint_bank {
struct list_head list;
int start;
int nr_groups;
int irq;
struct samsung_gpio_chip **chips;
void (*handler)(unsigned int, struct irq_desc *);
};
static LIST_HEAD(banks);
static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct irq_chip_type *ct = gc->chip_types;
unsigned int shift = (d->irq - gc->irq_base) << 2;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
type = S5P_IRQ_TYPE_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
type = S5P_IRQ_TYPE_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
type = S5P_IRQ_TYPE_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_HIGH:
type = S5P_IRQ_TYPE_LEVEL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
type = S5P_IRQ_TYPE_LEVEL_LOW;
break;
case IRQ_TYPE_NONE:
default:
printk(KERN_WARNING "No irq type\n");
return -EINVAL;
}
gc->type_cache &= ~(0x7 << shift);
gc->type_cache |= type << shift;
writel(gc->type_cache, gc->reg_base + ct->regs.type);
return 0;
}
static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
{
struct s5p_gpioint_bank *bank = irq_get_handler_data(irq);
int group, pend_offset, mask_offset;
unsigned int pend, mask;
struct irq_chip *chip = irq_get_chip(irq);
chained_irq_enter(chip, desc);
for (group = 0; group < bank->nr_groups; group++) {
struct samsung_gpio_chip *chip = bank->chips[group];
if (!chip)
continue;
pend_offset = REG_OFFSET(group);
pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset);
if (!pend)
continue;
mask_offset = REG_OFFSET(group);
mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset);
pend &= ~mask;
while (pend) {
int offset = fls(pend) - 1;
int real_irq = chip->irq_base + offset;
generic_handle_irq(real_irq);
pend &= ~BIT(offset);
}
}
chained_irq_exit(chip, desc);
}
static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
{
static int used_gpioint_groups = 0;
int group = chip->group;
struct s5p_gpioint_bank *b, *bank = NULL;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
return -ENOMEM;
list_for_each_entry(b, &banks, list) {
if (group >= b->start && group < b->start + b->nr_groups) {
bank = b;
break;
}
}
if (!bank)
return -EINVAL;
if (!bank->handler) {
bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
bank->nr_groups, GFP_KERNEL);
if (!bank->chips)
return -ENOMEM;
irq_set_chained_handler(bank->irq, s5p_gpioint_handler);
irq_set_handler_data(bank->irq, bank);
bank->handler = s5p_gpioint_handler;
printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n",
bank->irq);
}
/*
* chained GPIO irq has been successfully registered, allocate new gpio
* int group and assign irq nubmers
*/
chip->irq_base = S5P_GPIOINT_BASE +
used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
used_gpioint_groups++;
bank->chips[group - bank->start] = chip;
gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
GPIO_BASE(chip),
handle_level_irq);
if (!gc)
return -ENOMEM;
ct = gc->chip_types;
ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = s5p_gpioint_set_type,
ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
return 0;
}
int __init s5p_register_gpio_interrupt(int pin)
{
struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
int offset, group;
int ret;
if (!my_chip)
return -EINVAL;
offset = pin - my_chip->chip.base;
group = my_chip->group;
/* check if the group has been already registered */
if (my_chip->irq_base)
goto success;
/* register gpio group */
ret = s5p_gpioint_add(my_chip);
if (ret == 0) {
my_chip->chip.to_irq = samsung_gpiolib_to_irq;
printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
group);
goto success;
}
return ret;
success:
my_chip->bitmap_gpio_int |= BIT(offset);
return my_chip->irq_base + offset;
}
int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups)
{
struct s5p_gpioint_bank *bank;
bank = kzalloc(sizeof(*bank), GFP_KERNEL);
if (!bank)
return -ENOMEM;
bank->start = start;
bank->nr_groups = nr_groups;
bank->irq = chain_irq;
list_add_tail(&bank->list, &banks);
return 0;
}