linux/drivers/pci/hotplug/rpaphp_pci.c
Linas Vepstas 1b7c9fcaa1 pci hotplug: fix rpaphp directory naming
Fix presentation of the slot number in the /sys/bus/pci/slots
directory to match that used in the majority of other drivers.

> Greg said:
> How is anyone supposed to write sane managability tools in the
> presence
> of such anarchy?
>
> > ~ # cat /sys/bus/pci/slots/0000:00:02.2/phy_location
> > U787A.001.DNZ00Z5-P1-C2
>
> Right.  This should look like:
>
> # cat /sys/bus/pci/slots/U787A.001.DNZ00Z5-P1-C2/address
> 0000:00:02

This patch implements exactly what you describe. Boot tested.
I assume you really mean it -- if so, then please review and
ack the patch !?

I have absolutely no clue if this breaks any existing IBM tools.
I'm pretty sure it doesn't ... but attention Mike Strosaker! does it?

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: <strosake@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:22 -08:00

137 lines
3.6 KiB
C

/*
* PCI Hot Plug Controller Driver for RPA-compliant PPC64 platform.
* Copyright (C) 2003 Linda Xie <lxie@us.ibm.com>
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <lxie@us.ibm.com>
*
*/
#include <linux/pci.h>
#include <linux/string.h>
#include <asm/pci-bridge.h>
#include <asm/rtas.h>
#include <asm/machdep.h>
#include "../pci.h" /* for pci_add_new_bus */
#include "rpaphp.h"
int rpaphp_get_sensor_state(struct slot *slot, int *state)
{
int rc;
int setlevel;
rc = rtas_get_sensor(DR_ENTITY_SENSE, slot->index, state);
if (rc < 0) {
if (rc == -EFAULT || rc == -EEXIST) {
dbg("%s: slot must be power up to get sensor-state\n",
__FUNCTION__);
/* some slots have to be powered up
* before get-sensor will succeed.
*/
rc = rtas_set_power_level(slot->power_domain, POWER_ON,
&setlevel);
if (rc < 0) {
dbg("%s: power on slot[%s] failed rc=%d.\n",
__FUNCTION__, slot->name, rc);
} else {
rc = rtas_get_sensor(DR_ENTITY_SENSE,
slot->index, state);
}
} else if (rc == -ENODEV)
info("%s: slot is unusable\n", __FUNCTION__);
else
err("%s failed to get sensor state\n", __FUNCTION__);
}
return rc;
}
/**
* rpaphp_enable_slot - record slot state, config pci device
* @slot: target &slot
*
* Initialize values in the slot, and the hotplug_slot info
* structures to indicate if there is a pci card plugged into
* the slot. If the slot is not empty, run the pcibios routine
* to get pcibios stuff correctly set up.
*/
int rpaphp_enable_slot(struct slot *slot)
{
int rc, level, state;
struct pci_bus *bus;
struct hotplug_slot_info *info = slot->hotplug_slot->info;
info->adapter_status = NOT_VALID;
slot->state = EMPTY;
/* Find out if the power is turned on for the slot */
rc = rtas_get_power_level(slot->power_domain, &level);
if (rc)
return rc;
info->power_status = level;
/* Figure out if there is an adapter in the slot */
rc = rpaphp_get_sensor_state(slot, &state);
if (rc)
return rc;
bus = pcibios_find_pci_bus(slot->dn);
if (!bus) {
err("%s: no pci_bus for dn %s\n", __FUNCTION__, slot->dn->full_name);
return -EINVAL;
}
info->adapter_status = EMPTY;
slot->bus = bus;
slot->pci_devs = &bus->devices;
/* if there's an adapter in the slot, go add the pci devices */
if (state == PRESENT) {
info->adapter_status = NOT_CONFIGURED;
slot->state = NOT_CONFIGURED;
/* non-empty slot has to have child */
if (!slot->dn->child) {
err("%s: slot[%s]'s device_node doesn't have child for adapter\n",
__FUNCTION__, slot->name);
return -EINVAL;
}
if (list_empty(&bus->devices))
pcibios_add_pci_devices(bus);
if (!list_empty(&bus->devices)) {
info->adapter_status = CONFIGURED;
slot->state = CONFIGURED;
}
if (debug) {
struct pci_dev *dev;
dbg("%s: pci_devs of slot[%s]\n", __FUNCTION__, slot->dn->full_name);
list_for_each_entry (dev, &bus->devices, bus_list)
dbg("\t%s\n", pci_name(dev));
}
}
return 0;
}