linux/net/core/sysctl_net_core.c
Daniel Borkmann 4f3446bb80 bpf: add generic constant blinding for use in jits
This work adds a generic facility for use from eBPF JIT compilers
that allows for further hardening of JIT generated images through
blinding constants. In response to the original work on BPF JIT
spraying published by Keegan McAllister [1], most BPF JITs were
changed to make images read-only and start at a randomized offset
in the page, where the rest was filled with trap instructions. We
have this nowadays in x86, arm, arm64 and s390 JIT compilers.
Additionally, later work also made eBPF interpreter images read
only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86,
arm, arm64 and s390 archs as well currently. This is done by
default for mentioned JITs when JITing is enabled. Furthermore,
we had a generic and configurable constant blinding facility on our
todo for quite some time now to further make spraying harder, and
first implementation since around netconf 2016.

We found that for systems where untrusted users can load cBPF/eBPF
code where JIT is enabled, start offset randomization helps a bit
to make jumps into crafted payload harder, but in case where larger
programs that cross page boundary are injected, we again have some
part of the program opcodes at a page start offset. With improved
guessing and more reliable payload injection, chances can increase
to jump into such payload. Elena Reshetova recently wrote a test
case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which
can leave some more room for payloads. Note that for all this,
additional bugs in the kernel are still required to make the jump
(and of course to guess right, to not jump into a trap) and naturally
the JIT must be enabled, which is disabled by default.

For helping mitigation, the general idea is to provide an option
bpf_jit_harden that admins can tweak along with bpf_jit_enable, so
that for cases where JIT should be enabled for performance reasons,
the generated image can be further hardened with blinding constants
for unpriviledged users (bpf_jit_harden == 1), with trading off
performance for these, but not for privileged ones. We also added
the option of blinding for all users (bpf_jit_harden == 2), which
is quite helpful for testing f.e. with test_bpf.ko. There are no
further e.g. hardening levels of bpf_jit_harden switch intended,
rationale is to have it dead simple to use as on/off. Since this
functionality would need to be duplicated over and over for JIT
compilers to use, which are already complex enough, we provide a
generic eBPF byte-code level based blinding implementation, which is
then just transparently JITed. JIT compilers need to make only a few
changes to integrate this facility and can be migrated one by one.

This option is for eBPF JITs and will be used in x86, arm64, s390
without too much effort, and soon ppc64 JITs, thus that native eBPF
can be blinded as well as cBPF to eBPF migrations, so that both can
be covered with a single implementation. The rule for JITs is that
bpf_jit_blind_constants() must be called from bpf_int_jit_compile(),
and in case blinding is disabled, we follow normally with JITing the
passed program. In case blinding is enabled and we fail during the
process of blinding itself, we must return with the interpreter.
Similarly, in case the JITing process after the blinding failed, we
return normally to the interpreter with the non-blinded code. Meaning,
interpreter doesn't change in any way and operates on eBPF code as
usual. For doing this pre-JIT blinding step, we need to make use of
a helper/auxiliary register, here BPF_REG_AX. This is strictly internal
to the JIT and not in any way part of the eBPF architecture. Just like
in the same way as JITs internally make use of some helper registers
when emitting code, only that here the helper register is one
abstraction level higher in eBPF bytecode, but nevertheless in JIT
phase. That helper register is needed since f.e. manually written
program can issue loads to all registers of eBPF architecture.

The core concept with the additional register is: blind out all 32
and 64 bit constants by converting BPF_K based instructions into a
small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this
is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND,
and REG <OP> BPF_REG_AX, so actual operation on the target register
is translated from BPF_K into BPF_X one that is operating on
BPF_REG_AX's content. During rewriting phase when blinding, RND is
newly generated via prandom_u32() for each processed instruction.
64 bit loads are split into two 32 bit loads to make translation and
patching not too complex. Only basic thing required by JITs is to
call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other()
pair, and to map BPF_REG_AX into an unused register.

Small bpf_jit_disasm extract from [2] when applied to x86 JIT:

echo 0 > /proc/sys/net/core/bpf_jit_harden

  ffffffffa034f5e9 + <x>:
  [...]
  39:   mov    $0xa8909090,%eax
  3e:   mov    $0xa8909090,%eax
  43:   mov    $0xa8ff3148,%eax
  48:   mov    $0xa89081b4,%eax
  4d:   mov    $0xa8900bb0,%eax
  52:   mov    $0xa810e0c1,%eax
  57:   mov    $0xa8908eb4,%eax
  5c:   mov    $0xa89020b0,%eax
  [...]

echo 1 > /proc/sys/net/core/bpf_jit_harden

  ffffffffa034f1e5 + <x>:
  [...]
  39:   mov    $0xe1192563,%r10d
  3f:   xor    $0x4989b5f3,%r10d
  46:   mov    %r10d,%eax
  49:   mov    $0xb8296d93,%r10d
  4f:   xor    $0x10b9fd03,%r10d
  56:   mov    %r10d,%eax
  59:   mov    $0x8c381146,%r10d
  5f:   xor    $0x24c7200e,%r10d
  66:   mov    %r10d,%eax
  69:   mov    $0xeb2a830e,%r10d
  6f:   xor    $0x43ba02ba,%r10d
  76:   mov    %r10d,%eax
  79:   mov    $0xd9730af,%r10d
  7f:   xor    $0xa5073b1f,%r10d
  86:   mov    %r10d,%eax
  89:   mov    $0x9a45662b,%r10d
  8f:   xor    $0x325586ea,%r10d
  96:   mov    %r10d,%eax
  [...]

As can be seen, original constants that carry payload are hidden
when enabled, actual operations are transformed from constant-based
to register-based ones, making jumps into constants ineffective.
Above extract/example uses single BPF load instruction over and
over, but of course all instructions with constants are blinded.

Performance wise, JIT with blinding performs a bit slower than just
JIT and faster than interpreter case. This is expected, since we
still get all the performance benefits from JITing and in normal
use-cases not every single instruction needs to be blinded. Summing
up all 296 test cases averaged over multiple runs from test_bpf.ko
suite, interpreter was 55% slower than JIT only and JIT with blinding
was 8% slower than JIT only. Since there are also some extremes in
the test suite, I expect for ordinary workloads that the performance
for the JIT with blinding case is even closer to JIT only case,
f.e. nmap test case from suite has averaged timings in ns 29 (JIT),
35 (+ blinding), and 151 (interpreter).

BPF test suite, seccomp test suite, eBPF sample code and various
bigger networking eBPF programs have been tested with this and were
running fine. For testing purposes, I also adapted interpreter and
redirected blinded eBPF image to interpreter and also here all tests
pass.

  [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html
  [2] https://github.com/01org/jit-spray-poc-for-ksp/
  [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Elena Reshetova <elena.reshetova@intel.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16 13:49:32 -04:00

483 lines
11 KiB
C

/* -*- linux-c -*-
* sysctl_net_core.c: sysctl interface to net core subsystem.
*
* Begun April 1, 1996, Mike Shaver.
* Added /proc/sys/net/core directory entry (empty =) ). [MS]
*/
#include <linux/mm.h>
#include <linux/sysctl.h>
#include <linux/module.h>
#include <linux/socket.h>
#include <linux/netdevice.h>
#include <linux/ratelimit.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/kmemleak.h>
#include <net/ip.h>
#include <net/sock.h>
#include <net/net_ratelimit.h>
#include <net/busy_poll.h>
#include <net/pkt_sched.h>
static int zero = 0;
static int one = 1;
static int min_sndbuf = SOCK_MIN_SNDBUF;
static int min_rcvbuf = SOCK_MIN_RCVBUF;
static int max_skb_frags = MAX_SKB_FRAGS;
static int net_msg_warn; /* Unused, but still a sysctl */
#ifdef CONFIG_RPS
static int rps_sock_flow_sysctl(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
unsigned int orig_size, size;
int ret, i;
struct ctl_table tmp = {
.data = &size,
.maxlen = sizeof(size),
.mode = table->mode
};
struct rps_sock_flow_table *orig_sock_table, *sock_table;
static DEFINE_MUTEX(sock_flow_mutex);
mutex_lock(&sock_flow_mutex);
orig_sock_table = rcu_dereference_protected(rps_sock_flow_table,
lockdep_is_held(&sock_flow_mutex));
size = orig_size = orig_sock_table ? orig_sock_table->mask + 1 : 0;
ret = proc_dointvec(&tmp, write, buffer, lenp, ppos);
if (write) {
if (size) {
if (size > 1<<29) {
/* Enforce limit to prevent overflow */
mutex_unlock(&sock_flow_mutex);
return -EINVAL;
}
size = roundup_pow_of_two(size);
if (size != orig_size) {
sock_table =
vmalloc(RPS_SOCK_FLOW_TABLE_SIZE(size));
if (!sock_table) {
mutex_unlock(&sock_flow_mutex);
return -ENOMEM;
}
rps_cpu_mask = roundup_pow_of_two(nr_cpu_ids) - 1;
sock_table->mask = size - 1;
} else
sock_table = orig_sock_table;
for (i = 0; i < size; i++)
sock_table->ents[i] = RPS_NO_CPU;
} else
sock_table = NULL;
if (sock_table != orig_sock_table) {
rcu_assign_pointer(rps_sock_flow_table, sock_table);
if (sock_table)
static_key_slow_inc(&rps_needed);
if (orig_sock_table) {
static_key_slow_dec(&rps_needed);
synchronize_rcu();
vfree(orig_sock_table);
}
}
}
mutex_unlock(&sock_flow_mutex);
return ret;
}
#endif /* CONFIG_RPS */
#ifdef CONFIG_NET_FLOW_LIMIT
static DEFINE_MUTEX(flow_limit_update_mutex);
static int flow_limit_cpu_sysctl(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
struct sd_flow_limit *cur;
struct softnet_data *sd;
cpumask_var_t mask;
int i, len, ret = 0;
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
return -ENOMEM;
if (write) {
ret = cpumask_parse_user(buffer, *lenp, mask);
if (ret)
goto done;
mutex_lock(&flow_limit_update_mutex);
len = sizeof(*cur) + netdev_flow_limit_table_len;
for_each_possible_cpu(i) {
sd = &per_cpu(softnet_data, i);
cur = rcu_dereference_protected(sd->flow_limit,
lockdep_is_held(&flow_limit_update_mutex));
if (cur && !cpumask_test_cpu(i, mask)) {
RCU_INIT_POINTER(sd->flow_limit, NULL);
synchronize_rcu();
kfree(cur);
} else if (!cur && cpumask_test_cpu(i, mask)) {
cur = kzalloc_node(len, GFP_KERNEL,
cpu_to_node(i));
if (!cur) {
/* not unwinding previous changes */
ret = -ENOMEM;
goto write_unlock;
}
cur->num_buckets = netdev_flow_limit_table_len;
rcu_assign_pointer(sd->flow_limit, cur);
}
}
write_unlock:
mutex_unlock(&flow_limit_update_mutex);
} else {
char kbuf[128];
if (*ppos || !*lenp) {
*lenp = 0;
goto done;
}
cpumask_clear(mask);
rcu_read_lock();
for_each_possible_cpu(i) {
sd = &per_cpu(softnet_data, i);
if (rcu_dereference(sd->flow_limit))
cpumask_set_cpu(i, mask);
}
rcu_read_unlock();
len = min(sizeof(kbuf) - 1, *lenp);
len = scnprintf(kbuf, len, "%*pb", cpumask_pr_args(mask));
if (!len) {
*lenp = 0;
goto done;
}
if (len < *lenp)
kbuf[len++] = '\n';
if (copy_to_user(buffer, kbuf, len)) {
ret = -EFAULT;
goto done;
}
*lenp = len;
*ppos += len;
}
done:
free_cpumask_var(mask);
return ret;
}
static int flow_limit_table_len_sysctl(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
unsigned int old, *ptr;
int ret;
mutex_lock(&flow_limit_update_mutex);
ptr = table->data;
old = *ptr;
ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (!ret && write && !is_power_of_2(*ptr)) {
*ptr = old;
ret = -EINVAL;
}
mutex_unlock(&flow_limit_update_mutex);
return ret;
}
#endif /* CONFIG_NET_FLOW_LIMIT */
#ifdef CONFIG_NET_SCHED
static int set_default_qdisc(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char id[IFNAMSIZ];
struct ctl_table tbl = {
.data = id,
.maxlen = IFNAMSIZ,
};
int ret;
qdisc_get_default(id, IFNAMSIZ);
ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
if (write && ret == 0)
ret = qdisc_set_default(id);
return ret;
}
#endif
static int proc_do_rss_key(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table fake_table;
char buf[NETDEV_RSS_KEY_LEN * 3];
snprintf(buf, sizeof(buf), "%*phC", NETDEV_RSS_KEY_LEN, netdev_rss_key);
fake_table.data = buf;
fake_table.maxlen = sizeof(buf);
return proc_dostring(&fake_table, write, buffer, lenp, ppos);
}
static struct ctl_table net_core_table[] = {
#ifdef CONFIG_NET
{
.procname = "wmem_max",
.data = &sysctl_wmem_max,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_sndbuf,
},
{
.procname = "rmem_max",
.data = &sysctl_rmem_max,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_rcvbuf,
},
{
.procname = "wmem_default",
.data = &sysctl_wmem_default,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_sndbuf,
},
{
.procname = "rmem_default",
.data = &sysctl_rmem_default,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_rcvbuf,
},
{
.procname = "dev_weight",
.data = &weight_p,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
{
.procname = "netdev_max_backlog",
.data = &netdev_max_backlog,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
{
.procname = "netdev_rss_key",
.data = &netdev_rss_key,
.maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_do_rss_key,
},
#ifdef CONFIG_BPF_JIT
{
.procname = "bpf_jit_enable",
.data = &bpf_jit_enable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
# ifdef CONFIG_HAVE_EBPF_JIT
{
.procname = "bpf_jit_harden",
.data = &bpf_jit_harden,
.maxlen = sizeof(int),
.mode = 0600,
.proc_handler = proc_dointvec,
},
# endif
#endif
{
.procname = "netdev_tstamp_prequeue",
.data = &netdev_tstamp_prequeue,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
{
.procname = "message_cost",
.data = &net_ratelimit_state.interval,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
},
{
.procname = "message_burst",
.data = &net_ratelimit_state.burst,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "optmem_max",
.data = &sysctl_optmem_max,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
{
.procname = "tstamp_allow_data",
.data = &sysctl_tstamp_allow_data,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &zero,
.extra2 = &one
},
#ifdef CONFIG_RPS
{
.procname = "rps_sock_flow_entries",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = rps_sock_flow_sysctl
},
#endif
#ifdef CONFIG_NET_FLOW_LIMIT
{
.procname = "flow_limit_cpu_bitmap",
.mode = 0644,
.proc_handler = flow_limit_cpu_sysctl
},
{
.procname = "flow_limit_table_len",
.data = &netdev_flow_limit_table_len,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = flow_limit_table_len_sysctl
},
#endif /* CONFIG_NET_FLOW_LIMIT */
#ifdef CONFIG_NET_RX_BUSY_POLL
{
.procname = "busy_poll",
.data = &sysctl_net_busy_poll,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec
},
{
.procname = "busy_read",
.data = &sysctl_net_busy_read,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec
},
#endif
#ifdef CONFIG_NET_SCHED
{
.procname = "default_qdisc",
.mode = 0644,
.maxlen = IFNAMSIZ,
.proc_handler = set_default_qdisc
},
#endif
#endif /* CONFIG_NET */
{
.procname = "netdev_budget",
.data = &netdev_budget,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
{
.procname = "warnings",
.data = &net_msg_warn,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
{
.procname = "max_skb_frags",
.data = &sysctl_max_skb_frags,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &one,
.extra2 = &max_skb_frags,
},
{ }
};
static struct ctl_table netns_core_table[] = {
{
.procname = "somaxconn",
.data = &init_net.core.sysctl_somaxconn,
.maxlen = sizeof(int),
.mode = 0644,
.extra1 = &zero,
.proc_handler = proc_dointvec_minmax
},
{ }
};
static __net_init int sysctl_core_net_init(struct net *net)
{
struct ctl_table *tbl;
net->core.sysctl_somaxconn = SOMAXCONN;
tbl = netns_core_table;
if (!net_eq(net, &init_net)) {
tbl = kmemdup(tbl, sizeof(netns_core_table), GFP_KERNEL);
if (tbl == NULL)
goto err_dup;
tbl[0].data = &net->core.sysctl_somaxconn;
/* Don't export any sysctls to unprivileged users */
if (net->user_ns != &init_user_ns) {
tbl[0].procname = NULL;
}
}
net->core.sysctl_hdr = register_net_sysctl(net, "net/core", tbl);
if (net->core.sysctl_hdr == NULL)
goto err_reg;
return 0;
err_reg:
if (tbl != netns_core_table)
kfree(tbl);
err_dup:
return -ENOMEM;
}
static __net_exit void sysctl_core_net_exit(struct net *net)
{
struct ctl_table *tbl;
tbl = net->core.sysctl_hdr->ctl_table_arg;
unregister_net_sysctl_table(net->core.sysctl_hdr);
BUG_ON(tbl == netns_core_table);
kfree(tbl);
}
static __net_initdata struct pernet_operations sysctl_core_ops = {
.init = sysctl_core_net_init,
.exit = sysctl_core_net_exit,
};
static __init int sysctl_core_init(void)
{
register_net_sysctl(&init_net, "net/core", net_core_table);
return register_pernet_subsys(&sysctl_core_ops);
}
fs_initcall(sysctl_core_init);