linux/arch/powerpc/boot/main.c
Nathan Chancellor df4232d96e powerpc/boot: Use address-of operator on section symbols
Clang warns:

arch/powerpc/boot/main.c:107:18: warning: array comparison always
evaluates to a constant [-Wtautological-compare]
        if (_initrd_end > _initrd_start) {
                        ^
arch/powerpc/boot/main.c:155:20: warning: array comparison always
evaluates to a constant [-Wtautological-compare]
        if (_esm_blob_end <= _esm_blob_start)
                          ^
2 warnings generated.

These are not true arrays, they are linker defined symbols, which are
just addresses.  Using the address of operator silences the warning
and does not change the resulting assembly with either clang/ld.lld
or gcc/ld (tested with diff + objdump -Dr).

Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624035920.835571-1-natechancellor@gmail.com
2020-06-30 14:38:00 +10:00

285 lines
8.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) Paul Mackerras 1997.
*
* Updates for PPC64 by Todd Inglett, Dave Engebretsen & Peter Bergner.
*/
#include <stdarg.h>
#include <stddef.h>
#include "elf.h"
#include "page.h"
#include "string.h"
#include "stdio.h"
#include "ops.h"
#include "reg.h"
struct addr_range {
void *addr;
unsigned long size;
};
#undef DEBUG
static struct addr_range prep_kernel(void)
{
char elfheader[256];
unsigned char *vmlinuz_addr = (unsigned char *)_vmlinux_start;
unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
void *addr = 0;
struct elf_info ei;
long len;
int uncompressed_image = 0;
len = partial_decompress(vmlinuz_addr, vmlinuz_size,
elfheader, sizeof(elfheader), 0);
/* assume uncompressed data if -1 is returned */
if (len == -1) {
uncompressed_image = 1;
memcpy(elfheader, vmlinuz_addr, sizeof(elfheader));
printf("No valid compressed data found, assume uncompressed data\n\r");
}
if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei))
fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
if (platform_ops.image_hdr)
platform_ops.image_hdr(elfheader);
/* We need to alloc the memsize: gzip will expand the kernel
* text/data, then possible rubbish we don't care about. But
* the kernel bss must be claimed (it will be zero'd by the
* kernel itself)
*/
printf("Allocating 0x%lx bytes for kernel...\n\r", ei.memsize);
if (platform_ops.vmlinux_alloc) {
addr = platform_ops.vmlinux_alloc(ei.memsize);
} else {
/*
* Check if the kernel image (without bss) would overwrite the
* bootwrapper. The device tree has been moved in fdt_init()
* to an area allocated with malloc() (somewhere past _end).
*/
if ((unsigned long)_start < ei.loadsize)
fatal("Insufficient memory for kernel at address 0!"
" (_start=%p, uncompressed size=%08lx)\n\r",
_start, ei.loadsize);
if ((unsigned long)_end < ei.memsize)
fatal("The final kernel image would overwrite the "
"device tree\n\r");
}
if (uncompressed_image) {
memcpy(addr, vmlinuz_addr + ei.elfoffset, ei.loadsize);
printf("0x%lx bytes of uncompressed data copied\n\r",
ei.loadsize);
goto out;
}
/* Finally, decompress the kernel */
printf("Decompressing (0x%p <- 0x%p:0x%p)...\n\r", addr,
vmlinuz_addr, vmlinuz_addr+vmlinuz_size);
len = partial_decompress(vmlinuz_addr, vmlinuz_size,
addr, ei.loadsize, ei.elfoffset);
if (len < 0)
fatal("Decompression failed with error code %ld\n\r", len);
if (len != ei.loadsize)
fatal("Decompression error: got 0x%lx bytes, expected 0x%lx.\n\r",
len, ei.loadsize);
printf("Done! Decompressed 0x%lx bytes\n\r", len);
out:
flush_cache(addr, ei.loadsize);
return (struct addr_range){addr, ei.memsize};
}
static struct addr_range prep_initrd(struct addr_range vmlinux, void *chosen,
unsigned long initrd_addr,
unsigned long initrd_size)
{
/* If we have an image attached to us, it overrides anything
* supplied by the loader. */
if (&_initrd_end > &_initrd_start) {
printf("Attached initrd image at 0x%p-0x%p\n\r",
_initrd_start, _initrd_end);
initrd_addr = (unsigned long)_initrd_start;
initrd_size = _initrd_end - _initrd_start;
} else if (initrd_size > 0) {
printf("Using loader supplied ramdisk at 0x%lx-0x%lx\n\r",
initrd_addr, initrd_addr + initrd_size);
}
/* If there's no initrd at all, we're done */
if (! initrd_size)
return (struct addr_range){0, 0};
/*
* If the initrd is too low it will be clobbered when the
* kernel relocates to its final location. In this case,
* allocate a safer place and move it.
*/
if (initrd_addr < vmlinux.size) {
void *old_addr = (void *)initrd_addr;
printf("Allocating 0x%lx bytes for initrd ...\n\r",
initrd_size);
initrd_addr = (unsigned long)malloc(initrd_size);
if (! initrd_addr)
fatal("Can't allocate memory for initial "
"ramdisk !\n\r");
printf("Relocating initrd 0x%lx <- 0x%p (0x%lx bytes)\n\r",
initrd_addr, old_addr, initrd_size);
memmove((void *)initrd_addr, old_addr, initrd_size);
}
printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd_addr));
/* Tell the kernel initrd address via device tree */
setprop_val(chosen, "linux,initrd-start", (u32)(initrd_addr));
setprop_val(chosen, "linux,initrd-end", (u32)(initrd_addr+initrd_size));
return (struct addr_range){(void *)initrd_addr, initrd_size};
}
#ifdef __powerpc64__
static void prep_esm_blob(struct addr_range vmlinux, void *chosen)
{
unsigned long esm_blob_addr, esm_blob_size;
/* Do we have an ESM (Enter Secure Mode) blob? */
if (&_esm_blob_end <= &_esm_blob_start)
return;
printf("Attached ESM blob at 0x%p-0x%p\n\r",
_esm_blob_start, _esm_blob_end);
esm_blob_addr = (unsigned long)_esm_blob_start;
esm_blob_size = _esm_blob_end - _esm_blob_start;
/*
* If the ESM blob is too low it will be clobbered when the
* kernel relocates to its final location. In this case,
* allocate a safer place and move it.
*/
if (esm_blob_addr < vmlinux.size) {
void *old_addr = (void *)esm_blob_addr;
printf("Allocating 0x%lx bytes for esm_blob ...\n\r",
esm_blob_size);
esm_blob_addr = (unsigned long)malloc(esm_blob_size);
if (!esm_blob_addr)
fatal("Can't allocate memory for ESM blob !\n\r");
printf("Relocating ESM blob 0x%lx <- 0x%p (0x%lx bytes)\n\r",
esm_blob_addr, old_addr, esm_blob_size);
memmove((void *)esm_blob_addr, old_addr, esm_blob_size);
}
/* Tell the kernel ESM blob address via device tree. */
setprop_val(chosen, "linux,esm-blob-start", (u32)(esm_blob_addr));
setprop_val(chosen, "linux,esm-blob-end", (u32)(esm_blob_addr + esm_blob_size));
}
#else
static inline void prep_esm_blob(struct addr_range vmlinux, void *chosen) { }
#endif
/* A buffer that may be edited by tools operating on a zImage binary so as to
* edit the command line passed to vmlinux (by setting /chosen/bootargs).
* The buffer is put in it's own section so that tools may locate it easier.
*/
static char cmdline[BOOT_COMMAND_LINE_SIZE]
__attribute__((__section__("__builtin_cmdline")));
static void prep_cmdline(void *chosen)
{
unsigned int getline_timeout = 5000;
int v;
int n;
/* Wait-for-input time */
n = getprop(chosen, "linux,cmdline-timeout", &v, sizeof(v));
if (n == sizeof(v))
getline_timeout = v;
if (cmdline[0] == '\0')
getprop(chosen, "bootargs", cmdline, BOOT_COMMAND_LINE_SIZE-1);
printf("\n\rLinux/PowerPC load: %s", cmdline);
/* If possible, edit the command line */
if (console_ops.edit_cmdline && getline_timeout)
console_ops.edit_cmdline(cmdline, BOOT_COMMAND_LINE_SIZE, getline_timeout);
printf("\n\r");
/* Put the command line back into the devtree for the kernel */
setprop_str(chosen, "bootargs", cmdline);
}
struct platform_ops platform_ops;
struct dt_ops dt_ops;
struct console_ops console_ops;
struct loader_info loader_info;
void start(void)
{
struct addr_range vmlinux, initrd;
kernel_entry_t kentry;
unsigned long ft_addr = 0;
void *chosen;
/* Do this first, because malloc() could clobber the loader's
* command line. Only use the loader command line if a
* built-in command line wasn't set by an external tool */
if ((loader_info.cmdline_len > 0) && (cmdline[0] == '\0'))
memmove(cmdline, loader_info.cmdline,
min(loader_info.cmdline_len, BOOT_COMMAND_LINE_SIZE-1));
if (console_ops.open && (console_ops.open() < 0))
exit();
if (platform_ops.fixups)
platform_ops.fixups();
printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r",
_start, get_sp());
/* Ensure that the device tree has a /chosen node */
chosen = finddevice("/chosen");
if (!chosen)
chosen = create_node(NULL, "chosen");
vmlinux = prep_kernel();
initrd = prep_initrd(vmlinux, chosen,
loader_info.initrd_addr, loader_info.initrd_size);
prep_esm_blob(vmlinux, chosen);
prep_cmdline(chosen);
printf("Finalizing device tree...");
if (dt_ops.finalize)
ft_addr = dt_ops.finalize();
if (ft_addr)
printf(" flat tree at 0x%lx\n\r", ft_addr);
else
printf(" using OF tree (promptr=%p)\n\r", loader_info.promptr);
if (console_ops.close)
console_ops.close();
kentry = (kernel_entry_t) vmlinux.addr;
if (ft_addr) {
if(platform_ops.kentry)
platform_ops.kentry(ft_addr, vmlinux.addr);
else
kentry(ft_addr, 0, NULL);
}
else
kentry((unsigned long)initrd.addr, initrd.size,
loader_info.promptr);
/* console closed so printf in fatal below may not work */
fatal("Error: Linux kernel returned to zImage boot wrapper!\n\r");
}