linux/drivers/regulator/max8660.c
Bill Pemberton 8dc995f56e regulator: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20 10:53:38 +09:00

467 lines
12 KiB
C

/*
* max8660.c -- Voltage regulation for the Maxim 8660/8661
*
* based on max1586.c and wm8400-regulator.c
*
* Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59 Temple
* Place, Suite 330, Boston, MA 02111-1307 USA
*
* Some info:
*
* Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf
*
* This chip is a bit nasty because it is a write-only device. Thus, the driver
* uses shadow registers to keep track of its values. The main problem appears
* to be the initialization: When Linux boots up, we cannot know if the chip is
* in the default state or not, so we would have to pass such information in
* platform_data. As this adds a bit of complexity to the driver, this is left
* out for now until it is really needed.
*
* [A|S|M]DTV1 registers are currently not used, but [A|S|M]DTV2.
*
* If the driver is feature complete, it might be worth to check if one set of
* functions for V3-V7 is sufficient. For maximum flexibility during
* development, they are separated for now.
*
*/
#include <linux/module.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/slab.h>
#include <linux/regulator/max8660.h>
#define MAX8660_DCDC_MIN_UV 725000
#define MAX8660_DCDC_MAX_UV 1800000
#define MAX8660_DCDC_STEP 25000
#define MAX8660_DCDC_MAX_SEL 0x2b
#define MAX8660_LDO5_MIN_UV 1700000
#define MAX8660_LDO5_MAX_UV 2000000
#define MAX8660_LDO5_STEP 25000
#define MAX8660_LDO5_MAX_SEL 0x0c
#define MAX8660_LDO67_MIN_UV 1800000
#define MAX8660_LDO67_MAX_UV 3300000
#define MAX8660_LDO67_STEP 100000
#define MAX8660_LDO67_MAX_SEL 0x0f
enum {
MAX8660_OVER1,
MAX8660_OVER2,
MAX8660_VCC1,
MAX8660_ADTV1,
MAX8660_ADTV2,
MAX8660_SDTV1,
MAX8660_SDTV2,
MAX8660_MDTV1,
MAX8660_MDTV2,
MAX8660_L12VCR,
MAX8660_FPWM,
MAX8660_N_REGS, /* not a real register */
};
struct max8660 {
struct i2c_client *client;
u8 shadow_regs[MAX8660_N_REGS]; /* as chip is write only */
struct regulator_dev *rdev[];
};
static int max8660_write(struct max8660 *max8660, u8 reg, u8 mask, u8 val)
{
static const u8 max8660_addresses[MAX8660_N_REGS] =
{ 0x10, 0x12, 0x20, 0x23, 0x24, 0x29, 0x2a, 0x32, 0x33, 0x39, 0x80 };
int ret;
u8 reg_val = (max8660->shadow_regs[reg] & mask) | val;
dev_vdbg(&max8660->client->dev, "Writing reg %02x with %02x\n",
max8660_addresses[reg], reg_val);
ret = i2c_smbus_write_byte_data(max8660->client,
max8660_addresses[reg], reg_val);
if (ret == 0)
max8660->shadow_regs[reg] = reg_val;
return ret;
}
/*
* DCDC functions
*/
static int max8660_dcdc_is_enabled(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 val = max8660->shadow_regs[MAX8660_OVER1];
u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4;
return !!(val & mask);
}
static int max8660_dcdc_enable(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 bit = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4;
return max8660_write(max8660, MAX8660_OVER1, 0xff, bit);
}
static int max8660_dcdc_disable(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? ~1 : ~4;
return max8660_write(max8660, MAX8660_OVER1, mask, 0);
}
static int max8660_dcdc_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2;
u8 selector = max8660->shadow_regs[reg];
return selector;
}
static int max8660_dcdc_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 reg, bits;
int ret;
reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2;
ret = max8660_write(max8660, reg, 0, selector);
if (ret)
return ret;
/* Select target voltage register and activate regulation */
bits = (rdev_get_id(rdev) == MAX8660_V3) ? 0x03 : 0x30;
return max8660_write(max8660, MAX8660_VCC1, 0xff, bits);
}
static struct regulator_ops max8660_dcdc_ops = {
.is_enabled = max8660_dcdc_is_enabled,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.set_voltage_sel = max8660_dcdc_set_voltage_sel,
.get_voltage_sel = max8660_dcdc_get_voltage_sel,
};
/*
* LDO5 functions
*/
static int max8660_ldo5_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 selector = max8660->shadow_regs[MAX8660_MDTV2];
return selector;
}
static int max8660_ldo5_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
int ret;
ret = max8660_write(max8660, MAX8660_MDTV2, 0, selector);
if (ret)
return ret;
/* Select target voltage register and activate regulation */
return max8660_write(max8660, MAX8660_VCC1, 0xff, 0xc0);
}
static struct regulator_ops max8660_ldo5_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.set_voltage_sel = max8660_ldo5_set_voltage_sel,
.get_voltage_sel = max8660_ldo5_get_voltage_sel,
};
/*
* LDO67 functions
*/
static int max8660_ldo67_is_enabled(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 val = max8660->shadow_regs[MAX8660_OVER2];
u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4;
return !!(val & mask);
}
static int max8660_ldo67_enable(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 bit = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4;
return max8660_write(max8660, MAX8660_OVER2, 0xff, bit);
}
static int max8660_ldo67_disable(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? ~2 : ~4;
return max8660_write(max8660, MAX8660_OVER2, mask, 0);
}
static int max8660_ldo67_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 shift = (rdev_get_id(rdev) == MAX8660_V6) ? 0 : 4;
u8 selector = (max8660->shadow_regs[MAX8660_L12VCR] >> shift) & 0xf;
return selector;
}
static int max8660_ldo67_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
if (rdev_get_id(rdev) == MAX8660_V6)
return max8660_write(max8660, MAX8660_L12VCR, 0xf0, selector);
else
return max8660_write(max8660, MAX8660_L12VCR, 0x0f,
selector << 4);
}
static struct regulator_ops max8660_ldo67_ops = {
.is_enabled = max8660_ldo67_is_enabled,
.enable = max8660_ldo67_enable,
.disable = max8660_ldo67_disable,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = max8660_ldo67_get_voltage_sel,
.set_voltage_sel = max8660_ldo67_set_voltage_sel,
};
static const struct regulator_desc max8660_reg[] = {
{
.name = "V3(DCDC)",
.id = MAX8660_V3,
.ops = &max8660_dcdc_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_DCDC_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_DCDC_MIN_UV,
.uV_step = MAX8660_DCDC_STEP,
},
{
.name = "V4(DCDC)",
.id = MAX8660_V4,
.ops = &max8660_dcdc_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_DCDC_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_DCDC_MIN_UV,
.uV_step = MAX8660_DCDC_STEP,
},
{
.name = "V5(LDO)",
.id = MAX8660_V5,
.ops = &max8660_ldo5_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_LDO5_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_LDO5_MIN_UV,
.uV_step = MAX8660_LDO5_STEP,
},
{
.name = "V6(LDO)",
.id = MAX8660_V6,
.ops = &max8660_ldo67_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_LDO67_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_LDO67_MIN_UV,
.uV_step = MAX8660_LDO67_STEP,
},
{
.name = "V7(LDO)",
.id = MAX8660_V7,
.ops = &max8660_ldo67_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_LDO67_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_LDO67_MIN_UV,
.uV_step = MAX8660_LDO67_STEP,
},
};
static int max8660_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
struct regulator_dev **rdev;
struct max8660_platform_data *pdata = client->dev.platform_data;
struct regulator_config config = { };
struct max8660 *max8660;
int boot_on, i, id, ret = -EINVAL;
if (pdata->num_subdevs > MAX8660_V_END) {
dev_err(&client->dev, "Too many regulators found!\n");
return -EINVAL;
}
max8660 = devm_kzalloc(&client->dev, sizeof(struct max8660) +
sizeof(struct regulator_dev *) * MAX8660_V_END,
GFP_KERNEL);
if (!max8660)
return -ENOMEM;
max8660->client = client;
rdev = max8660->rdev;
if (pdata->en34_is_high) {
/* Simulate always on */
max8660->shadow_regs[MAX8660_OVER1] = 5;
} else {
/* Otherwise devices can be toggled via software */
max8660_dcdc_ops.enable = max8660_dcdc_enable;
max8660_dcdc_ops.disable = max8660_dcdc_disable;
}
/*
* First, set up shadow registers to prevent glitches. As some
* registers are shared between regulators, everything must be properly
* set up for all regulators in advance.
*/
max8660->shadow_regs[MAX8660_ADTV1] =
max8660->shadow_regs[MAX8660_ADTV2] =
max8660->shadow_regs[MAX8660_SDTV1] =
max8660->shadow_regs[MAX8660_SDTV2] = 0x1b;
max8660->shadow_regs[MAX8660_MDTV1] =
max8660->shadow_regs[MAX8660_MDTV2] = 0x04;
for (i = 0; i < pdata->num_subdevs; i++) {
if (!pdata->subdevs[i].platform_data)
goto err_out;
boot_on = pdata->subdevs[i].platform_data->constraints.boot_on;
switch (pdata->subdevs[i].id) {
case MAX8660_V3:
if (boot_on)
max8660->shadow_regs[MAX8660_OVER1] |= 1;
break;
case MAX8660_V4:
if (boot_on)
max8660->shadow_regs[MAX8660_OVER1] |= 4;
break;
case MAX8660_V5:
break;
case MAX8660_V6:
if (boot_on)
max8660->shadow_regs[MAX8660_OVER2] |= 2;
break;
case MAX8660_V7:
if (!strcmp(i2c_id->name, "max8661")) {
dev_err(&client->dev, "Regulator not on this chip!\n");
goto err_out;
}
if (boot_on)
max8660->shadow_regs[MAX8660_OVER2] |= 4;
break;
default:
dev_err(&client->dev, "invalid regulator %s\n",
pdata->subdevs[i].name);
goto err_out;
}
}
/* Finally register devices */
for (i = 0; i < pdata->num_subdevs; i++) {
id = pdata->subdevs[i].id;
config.dev = &client->dev;
config.init_data = pdata->subdevs[i].platform_data;
config.driver_data = max8660;
rdev[i] = regulator_register(&max8660_reg[id], &config);
if (IS_ERR(rdev[i])) {
ret = PTR_ERR(rdev[i]);
dev_err(&client->dev, "failed to register %s\n",
max8660_reg[id].name);
goto err_unregister;
}
}
i2c_set_clientdata(client, max8660);
return 0;
err_unregister:
while (--i >= 0)
regulator_unregister(rdev[i]);
err_out:
return ret;
}
static int max8660_remove(struct i2c_client *client)
{
struct max8660 *max8660 = i2c_get_clientdata(client);
int i;
for (i = 0; i < MAX8660_V_END; i++)
if (max8660->rdev[i])
regulator_unregister(max8660->rdev[i]);
return 0;
}
static const struct i2c_device_id max8660_id[] = {
{ "max8660", 0 },
{ "max8661", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max8660_id);
static struct i2c_driver max8660_driver = {
.probe = max8660_probe,
.remove = max8660_remove,
.driver = {
.name = "max8660",
.owner = THIS_MODULE,
},
.id_table = max8660_id,
};
static int __init max8660_init(void)
{
return i2c_add_driver(&max8660_driver);
}
subsys_initcall(max8660_init);
static void __exit max8660_exit(void)
{
i2c_del_driver(&max8660_driver);
}
module_exit(max8660_exit);
/* Module information */
MODULE_DESCRIPTION("MAXIM 8660/8661 voltage regulator driver");
MODULE_AUTHOR("Wolfram Sang");
MODULE_LICENSE("GPL v2");