mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
6409ea65b3
Currently we're gracefully tearing down each active connection when fcoe.ko is removed. We shouldn't allow the user to destroy connections by removing the module. We should force the user to destroy each connection and then the module can be removed. This patch makes it so a refrerence count on the module is taken each time a fcoe_interface is created. The reference count is dropped when the fcoe_interface is destroyed. This makes it so that module_exit() doesn't get called unless all fcoe_interfaces have been destroyed. This patch leaves the removal of interfaces in the module_exit routine so that if the user does a 'rmmod -f' we'll clean everything up before removing the module. The module_put line was put before the out_putdev goto line because we should only be decrementing the reference count if a fcoe_interface is actually destroyed. If we can't find the netdev or the fcoe_interface then it's assumed that something else has destroyed the fcoe_interface and it would have decremented the reference count at that time. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2632 lines
69 KiB
C
2632 lines
69 KiB
C
/*
|
|
* Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*
|
|
* Maintained at www.Open-FCoE.org
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/version.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/ctype.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
#include <scsi/scsicam.h>
|
|
#include <scsi/scsi_transport.h>
|
|
#include <scsi/scsi_transport_fc.h>
|
|
#include <net/rtnetlink.h>
|
|
|
|
#include <scsi/fc/fc_encaps.h>
|
|
#include <scsi/fc/fc_fip.h>
|
|
|
|
#include <scsi/libfc.h>
|
|
#include <scsi/fc_frame.h>
|
|
#include <scsi/libfcoe.h>
|
|
|
|
#include "fcoe.h"
|
|
|
|
MODULE_AUTHOR("Open-FCoE.org");
|
|
MODULE_DESCRIPTION("FCoE");
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
/* Performance tuning parameters for fcoe */
|
|
static unsigned int fcoe_ddp_min;
|
|
module_param_named(ddp_min, fcoe_ddp_min, uint, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(ddp_min, "Minimum I/O size in bytes for " \
|
|
"Direct Data Placement (DDP).");
|
|
|
|
DEFINE_MUTEX(fcoe_config_mutex);
|
|
|
|
/* fcoe_percpu_clean completion. Waiter protected by fcoe_create_mutex */
|
|
static DECLARE_COMPLETION(fcoe_flush_completion);
|
|
|
|
/* fcoe host list */
|
|
/* must only by accessed under the RTNL mutex */
|
|
LIST_HEAD(fcoe_hostlist);
|
|
DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
|
|
|
|
/* Function Prototypes */
|
|
static int fcoe_reset(struct Scsi_Host *);
|
|
static int fcoe_xmit(struct fc_lport *, struct fc_frame *);
|
|
static int fcoe_rcv(struct sk_buff *, struct net_device *,
|
|
struct packet_type *, struct net_device *);
|
|
static int fcoe_percpu_receive_thread(void *);
|
|
static void fcoe_clean_pending_queue(struct fc_lport *);
|
|
static void fcoe_percpu_clean(struct fc_lport *);
|
|
static int fcoe_link_ok(struct fc_lport *);
|
|
|
|
static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *);
|
|
static int fcoe_hostlist_add(const struct fc_lport *);
|
|
|
|
static void fcoe_check_wait_queue(struct fc_lport *, struct sk_buff *);
|
|
static int fcoe_device_notification(struct notifier_block *, ulong, void *);
|
|
static void fcoe_dev_setup(void);
|
|
static void fcoe_dev_cleanup(void);
|
|
static struct fcoe_interface
|
|
*fcoe_hostlist_lookup_port(const struct net_device *);
|
|
|
|
static int fcoe_fip_recv(struct sk_buff *, struct net_device *,
|
|
struct packet_type *, struct net_device *);
|
|
|
|
static void fcoe_fip_send(struct fcoe_ctlr *, struct sk_buff *);
|
|
static void fcoe_update_src_mac(struct fc_lport *, u8 *);
|
|
static u8 *fcoe_get_src_mac(struct fc_lport *);
|
|
static void fcoe_destroy_work(struct work_struct *);
|
|
|
|
static int fcoe_ddp_setup(struct fc_lport *, u16, struct scatterlist *,
|
|
unsigned int);
|
|
static int fcoe_ddp_done(struct fc_lport *, u16);
|
|
|
|
static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *);
|
|
|
|
static int fcoe_create(const char *, struct kernel_param *);
|
|
static int fcoe_destroy(const char *, struct kernel_param *);
|
|
static int fcoe_enable(const char *, struct kernel_param *);
|
|
static int fcoe_disable(const char *, struct kernel_param *);
|
|
|
|
static struct fc_seq *fcoe_elsct_send(struct fc_lport *,
|
|
u32 did, struct fc_frame *,
|
|
unsigned int op,
|
|
void (*resp)(struct fc_seq *,
|
|
struct fc_frame *,
|
|
void *),
|
|
void *, u32 timeout);
|
|
static void fcoe_recv_frame(struct sk_buff *skb);
|
|
|
|
static void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *);
|
|
|
|
module_param_call(create, fcoe_create, NULL, NULL, S_IWUSR);
|
|
__MODULE_PARM_TYPE(create, "string");
|
|
MODULE_PARM_DESC(create, " Creates fcoe instance on a ethernet interface");
|
|
module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR);
|
|
__MODULE_PARM_TYPE(destroy, "string");
|
|
MODULE_PARM_DESC(destroy, " Destroys fcoe instance on a ethernet interface");
|
|
module_param_call(enable, fcoe_enable, NULL, NULL, S_IWUSR);
|
|
__MODULE_PARM_TYPE(enable, "string");
|
|
MODULE_PARM_DESC(enable, " Enables fcoe on a ethernet interface.");
|
|
module_param_call(disable, fcoe_disable, NULL, NULL, S_IWUSR);
|
|
__MODULE_PARM_TYPE(disable, "string");
|
|
MODULE_PARM_DESC(disable, " Disables fcoe on a ethernet interface.");
|
|
|
|
/* notification function for packets from net device */
|
|
static struct notifier_block fcoe_notifier = {
|
|
.notifier_call = fcoe_device_notification,
|
|
};
|
|
|
|
/* notification function for CPU hotplug events */
|
|
static struct notifier_block fcoe_cpu_notifier = {
|
|
.notifier_call = fcoe_cpu_callback,
|
|
};
|
|
|
|
static struct scsi_transport_template *fcoe_transport_template;
|
|
static struct scsi_transport_template *fcoe_vport_transport_template;
|
|
|
|
static int fcoe_vport_destroy(struct fc_vport *);
|
|
static int fcoe_vport_create(struct fc_vport *, bool disabled);
|
|
static int fcoe_vport_disable(struct fc_vport *, bool disable);
|
|
static void fcoe_set_vport_symbolic_name(struct fc_vport *);
|
|
|
|
static struct libfc_function_template fcoe_libfc_fcn_templ = {
|
|
.frame_send = fcoe_xmit,
|
|
.ddp_setup = fcoe_ddp_setup,
|
|
.ddp_done = fcoe_ddp_done,
|
|
.elsct_send = fcoe_elsct_send,
|
|
.get_lesb = fcoe_get_lesb,
|
|
};
|
|
|
|
struct fc_function_template fcoe_transport_function = {
|
|
.show_host_node_name = 1,
|
|
.show_host_port_name = 1,
|
|
.show_host_supported_classes = 1,
|
|
.show_host_supported_fc4s = 1,
|
|
.show_host_active_fc4s = 1,
|
|
.show_host_maxframe_size = 1,
|
|
|
|
.show_host_port_id = 1,
|
|
.show_host_supported_speeds = 1,
|
|
.get_host_speed = fc_get_host_speed,
|
|
.show_host_speed = 1,
|
|
.show_host_port_type = 1,
|
|
.get_host_port_state = fc_get_host_port_state,
|
|
.show_host_port_state = 1,
|
|
.show_host_symbolic_name = 1,
|
|
|
|
.dd_fcrport_size = sizeof(struct fc_rport_libfc_priv),
|
|
.show_rport_maxframe_size = 1,
|
|
.show_rport_supported_classes = 1,
|
|
|
|
.show_host_fabric_name = 1,
|
|
.show_starget_node_name = 1,
|
|
.show_starget_port_name = 1,
|
|
.show_starget_port_id = 1,
|
|
.set_rport_dev_loss_tmo = fc_set_rport_loss_tmo,
|
|
.show_rport_dev_loss_tmo = 1,
|
|
.get_fc_host_stats = fc_get_host_stats,
|
|
.issue_fc_host_lip = fcoe_reset,
|
|
|
|
.terminate_rport_io = fc_rport_terminate_io,
|
|
|
|
.vport_create = fcoe_vport_create,
|
|
.vport_delete = fcoe_vport_destroy,
|
|
.vport_disable = fcoe_vport_disable,
|
|
.set_vport_symbolic_name = fcoe_set_vport_symbolic_name,
|
|
|
|
.bsg_request = fc_lport_bsg_request,
|
|
};
|
|
|
|
struct fc_function_template fcoe_vport_transport_function = {
|
|
.show_host_node_name = 1,
|
|
.show_host_port_name = 1,
|
|
.show_host_supported_classes = 1,
|
|
.show_host_supported_fc4s = 1,
|
|
.show_host_active_fc4s = 1,
|
|
.show_host_maxframe_size = 1,
|
|
|
|
.show_host_port_id = 1,
|
|
.show_host_supported_speeds = 1,
|
|
.get_host_speed = fc_get_host_speed,
|
|
.show_host_speed = 1,
|
|
.show_host_port_type = 1,
|
|
.get_host_port_state = fc_get_host_port_state,
|
|
.show_host_port_state = 1,
|
|
.show_host_symbolic_name = 1,
|
|
|
|
.dd_fcrport_size = sizeof(struct fc_rport_libfc_priv),
|
|
.show_rport_maxframe_size = 1,
|
|
.show_rport_supported_classes = 1,
|
|
|
|
.show_host_fabric_name = 1,
|
|
.show_starget_node_name = 1,
|
|
.show_starget_port_name = 1,
|
|
.show_starget_port_id = 1,
|
|
.set_rport_dev_loss_tmo = fc_set_rport_loss_tmo,
|
|
.show_rport_dev_loss_tmo = 1,
|
|
.get_fc_host_stats = fc_get_host_stats,
|
|
.issue_fc_host_lip = fcoe_reset,
|
|
|
|
.terminate_rport_io = fc_rport_terminate_io,
|
|
|
|
.bsg_request = fc_lport_bsg_request,
|
|
};
|
|
|
|
static struct scsi_host_template fcoe_shost_template = {
|
|
.module = THIS_MODULE,
|
|
.name = "FCoE Driver",
|
|
.proc_name = FCOE_NAME,
|
|
.queuecommand = fc_queuecommand,
|
|
.eh_abort_handler = fc_eh_abort,
|
|
.eh_device_reset_handler = fc_eh_device_reset,
|
|
.eh_host_reset_handler = fc_eh_host_reset,
|
|
.slave_alloc = fc_slave_alloc,
|
|
.change_queue_depth = fc_change_queue_depth,
|
|
.change_queue_type = fc_change_queue_type,
|
|
.this_id = -1,
|
|
.cmd_per_lun = 3,
|
|
.can_queue = FCOE_MAX_OUTSTANDING_COMMANDS,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.sg_tablesize = SG_ALL,
|
|
.max_sectors = 0xffff,
|
|
};
|
|
|
|
/**
|
|
* fcoe_interface_setup() - Setup a FCoE interface
|
|
* @fcoe: The new FCoE interface
|
|
* @netdev: The net device that the fcoe interface is on
|
|
*
|
|
* Returns : 0 for success
|
|
* Locking: must be called with the RTNL mutex held
|
|
*/
|
|
static int fcoe_interface_setup(struct fcoe_interface *fcoe,
|
|
struct net_device *netdev)
|
|
{
|
|
struct fcoe_ctlr *fip = &fcoe->ctlr;
|
|
struct netdev_hw_addr *ha;
|
|
struct net_device *real_dev;
|
|
u8 flogi_maddr[ETH_ALEN];
|
|
const struct net_device_ops *ops;
|
|
|
|
fcoe->netdev = netdev;
|
|
|
|
/* Let LLD initialize for FCoE */
|
|
ops = netdev->netdev_ops;
|
|
if (ops->ndo_fcoe_enable) {
|
|
if (ops->ndo_fcoe_enable(netdev))
|
|
FCOE_NETDEV_DBG(netdev, "Failed to enable FCoE"
|
|
" specific feature for LLD.\n");
|
|
}
|
|
|
|
/* Do not support for bonding device */
|
|
if ((netdev->priv_flags & IFF_MASTER_ALB) ||
|
|
(netdev->priv_flags & IFF_SLAVE_INACTIVE) ||
|
|
(netdev->priv_flags & IFF_MASTER_8023AD)) {
|
|
FCOE_NETDEV_DBG(netdev, "Bonded interfaces not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/* look for SAN MAC address, if multiple SAN MACs exist, only
|
|
* use the first one for SPMA */
|
|
real_dev = (netdev->priv_flags & IFF_802_1Q_VLAN) ?
|
|
vlan_dev_real_dev(netdev) : netdev;
|
|
rcu_read_lock();
|
|
for_each_dev_addr(real_dev, ha) {
|
|
if ((ha->type == NETDEV_HW_ADDR_T_SAN) &&
|
|
(is_valid_ether_addr(ha->addr))) {
|
|
memcpy(fip->ctl_src_addr, ha->addr, ETH_ALEN);
|
|
fip->spma = 1;
|
|
break;
|
|
}
|
|
}
|
|
rcu_read_unlock();
|
|
|
|
/* setup Source Mac Address */
|
|
if (!fip->spma)
|
|
memcpy(fip->ctl_src_addr, netdev->dev_addr, netdev->addr_len);
|
|
|
|
/*
|
|
* Add FCoE MAC address as second unicast MAC address
|
|
* or enter promiscuous mode if not capable of listening
|
|
* for multiple unicast MACs.
|
|
*/
|
|
memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
|
|
dev_unicast_add(netdev, flogi_maddr);
|
|
if (fip->spma)
|
|
dev_unicast_add(netdev, fip->ctl_src_addr);
|
|
dev_mc_add(netdev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
|
|
|
|
/*
|
|
* setup the receive function from ethernet driver
|
|
* on the ethertype for the given device
|
|
*/
|
|
fcoe->fcoe_packet_type.func = fcoe_rcv;
|
|
fcoe->fcoe_packet_type.type = __constant_htons(ETH_P_FCOE);
|
|
fcoe->fcoe_packet_type.dev = netdev;
|
|
dev_add_pack(&fcoe->fcoe_packet_type);
|
|
|
|
fcoe->fip_packet_type.func = fcoe_fip_recv;
|
|
fcoe->fip_packet_type.type = htons(ETH_P_FIP);
|
|
fcoe->fip_packet_type.dev = netdev;
|
|
dev_add_pack(&fcoe->fip_packet_type);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_interface_create() - Create a FCoE interface on a net device
|
|
* @netdev: The net device to create the FCoE interface on
|
|
*
|
|
* Returns: pointer to a struct fcoe_interface or NULL on error
|
|
*/
|
|
static struct fcoe_interface *fcoe_interface_create(struct net_device *netdev)
|
|
{
|
|
struct fcoe_interface *fcoe;
|
|
int err;
|
|
|
|
fcoe = kzalloc(sizeof(*fcoe), GFP_KERNEL);
|
|
if (!fcoe) {
|
|
FCOE_NETDEV_DBG(netdev, "Could not allocate fcoe structure\n");
|
|
return NULL;
|
|
}
|
|
|
|
dev_hold(netdev);
|
|
kref_init(&fcoe->kref);
|
|
|
|
/*
|
|
* Initialize FIP.
|
|
*/
|
|
fcoe_ctlr_init(&fcoe->ctlr);
|
|
fcoe->ctlr.send = fcoe_fip_send;
|
|
fcoe->ctlr.update_mac = fcoe_update_src_mac;
|
|
fcoe->ctlr.get_src_addr = fcoe_get_src_mac;
|
|
|
|
err = fcoe_interface_setup(fcoe, netdev);
|
|
if (err) {
|
|
fcoe_ctlr_destroy(&fcoe->ctlr);
|
|
kfree(fcoe);
|
|
dev_put(netdev);
|
|
return NULL;
|
|
}
|
|
|
|
return fcoe;
|
|
}
|
|
|
|
/**
|
|
* fcoe_interface_cleanup() - Clean up a FCoE interface
|
|
* @fcoe: The FCoE interface to be cleaned up
|
|
*
|
|
* Caller must be holding the RTNL mutex
|
|
*/
|
|
void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
|
|
{
|
|
struct net_device *netdev = fcoe->netdev;
|
|
struct fcoe_ctlr *fip = &fcoe->ctlr;
|
|
u8 flogi_maddr[ETH_ALEN];
|
|
const struct net_device_ops *ops;
|
|
|
|
/*
|
|
* Don't listen for Ethernet packets anymore.
|
|
* synchronize_net() ensures that the packet handlers are not running
|
|
* on another CPU. dev_remove_pack() would do that, this calls the
|
|
* unsyncronized version __dev_remove_pack() to avoid multiple delays.
|
|
*/
|
|
__dev_remove_pack(&fcoe->fcoe_packet_type);
|
|
__dev_remove_pack(&fcoe->fip_packet_type);
|
|
synchronize_net();
|
|
|
|
/* Delete secondary MAC addresses */
|
|
memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
|
|
dev_unicast_delete(netdev, flogi_maddr);
|
|
if (fip->spma)
|
|
dev_unicast_delete(netdev, fip->ctl_src_addr);
|
|
dev_mc_delete(netdev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
|
|
|
|
/* Tell the LLD we are done w/ FCoE */
|
|
ops = netdev->netdev_ops;
|
|
if (ops->ndo_fcoe_disable) {
|
|
if (ops->ndo_fcoe_disable(netdev))
|
|
FCOE_NETDEV_DBG(netdev, "Failed to disable FCoE"
|
|
" specific feature for LLD.\n");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* fcoe_interface_release() - fcoe_port kref release function
|
|
* @kref: Embedded reference count in an fcoe_interface struct
|
|
*/
|
|
static void fcoe_interface_release(struct kref *kref)
|
|
{
|
|
struct fcoe_interface *fcoe;
|
|
struct net_device *netdev;
|
|
|
|
fcoe = container_of(kref, struct fcoe_interface, kref);
|
|
netdev = fcoe->netdev;
|
|
/* tear-down the FCoE controller */
|
|
fcoe_ctlr_destroy(&fcoe->ctlr);
|
|
kfree(fcoe);
|
|
dev_put(netdev);
|
|
}
|
|
|
|
/**
|
|
* fcoe_interface_get() - Get a reference to a FCoE interface
|
|
* @fcoe: The FCoE interface to be held
|
|
*/
|
|
static inline void fcoe_interface_get(struct fcoe_interface *fcoe)
|
|
{
|
|
kref_get(&fcoe->kref);
|
|
}
|
|
|
|
/**
|
|
* fcoe_interface_put() - Put a reference to a FCoE interface
|
|
* @fcoe: The FCoE interface to be released
|
|
*/
|
|
static inline void fcoe_interface_put(struct fcoe_interface *fcoe)
|
|
{
|
|
kref_put(&fcoe->kref, fcoe_interface_release);
|
|
}
|
|
|
|
/**
|
|
* fcoe_fip_recv() - Handler for received FIP frames
|
|
* @skb: The receive skb
|
|
* @netdev: The associated net device
|
|
* @ptype: The packet_type structure which was used to register this handler
|
|
* @orig_dev: The original net_device the the skb was received on.
|
|
* (in case dev is a bond)
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_fip_recv(struct sk_buff *skb, struct net_device *netdev,
|
|
struct packet_type *ptype,
|
|
struct net_device *orig_dev)
|
|
{
|
|
struct fcoe_interface *fcoe;
|
|
|
|
fcoe = container_of(ptype, struct fcoe_interface, fip_packet_type);
|
|
fcoe_ctlr_recv(&fcoe->ctlr, skb);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_fip_send() - Send an Ethernet-encapsulated FIP frame
|
|
* @fip: The FCoE controller
|
|
* @skb: The FIP packet to be sent
|
|
*/
|
|
static void fcoe_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
|
|
{
|
|
skb->dev = fcoe_from_ctlr(fip)->netdev;
|
|
dev_queue_xmit(skb);
|
|
}
|
|
|
|
/**
|
|
* fcoe_update_src_mac() - Update the Ethernet MAC filters
|
|
* @lport: The local port to update the source MAC on
|
|
* @addr: Unicast MAC address to add
|
|
*
|
|
* Remove any previously-set unicast MAC filter.
|
|
* Add secondary FCoE MAC address filter for our OUI.
|
|
*/
|
|
static void fcoe_update_src_mac(struct fc_lport *lport, u8 *addr)
|
|
{
|
|
struct fcoe_port *port = lport_priv(lport);
|
|
struct fcoe_interface *fcoe = port->fcoe;
|
|
|
|
rtnl_lock();
|
|
if (!is_zero_ether_addr(port->data_src_addr))
|
|
dev_unicast_delete(fcoe->netdev, port->data_src_addr);
|
|
if (!is_zero_ether_addr(addr))
|
|
dev_unicast_add(fcoe->netdev, addr);
|
|
memcpy(port->data_src_addr, addr, ETH_ALEN);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
/**
|
|
* fcoe_get_src_mac() - return the Ethernet source address for an lport
|
|
* @lport: libfc lport
|
|
*/
|
|
static u8 *fcoe_get_src_mac(struct fc_lport *lport)
|
|
{
|
|
struct fcoe_port *port = lport_priv(lport);
|
|
|
|
return port->data_src_addr;
|
|
}
|
|
|
|
/**
|
|
* fcoe_lport_config() - Set up a local port
|
|
* @lport: The local port to be setup
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_lport_config(struct fc_lport *lport)
|
|
{
|
|
lport->link_up = 0;
|
|
lport->qfull = 0;
|
|
lport->max_retry_count = 3;
|
|
lport->max_rport_retry_count = 3;
|
|
lport->e_d_tov = 2 * 1000; /* FC-FS default */
|
|
lport->r_a_tov = 2 * 2 * 1000;
|
|
lport->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
|
|
FCP_SPPF_RETRY | FCP_SPPF_CONF_COMPL);
|
|
lport->does_npiv = 1;
|
|
|
|
fc_lport_init_stats(lport);
|
|
|
|
/* lport fc_lport related configuration */
|
|
fc_lport_config(lport);
|
|
|
|
/* offload related configuration */
|
|
lport->crc_offload = 0;
|
|
lport->seq_offload = 0;
|
|
lport->lro_enabled = 0;
|
|
lport->lro_xid = 0;
|
|
lport->lso_max = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_queue_timer() - The fcoe queue timer
|
|
* @lport: The local port
|
|
*
|
|
* Calls fcoe_check_wait_queue on timeout
|
|
*/
|
|
static void fcoe_queue_timer(ulong lport)
|
|
{
|
|
fcoe_check_wait_queue((struct fc_lport *)lport, NULL);
|
|
}
|
|
|
|
/**
|
|
* fcoe_get_wwn() - Get the world wide name from LLD if it supports it
|
|
* @netdev: the associated net device
|
|
* @wwn: the output WWN
|
|
* @type: the type of WWN (WWPN or WWNN)
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
|
|
{
|
|
const struct net_device_ops *ops = netdev->netdev_ops;
|
|
|
|
if (ops->ndo_fcoe_get_wwn)
|
|
return ops->ndo_fcoe_get_wwn(netdev, wwn, type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* fcoe_netdev_config() - Set up net devive for SW FCoE
|
|
* @lport: The local port that is associated with the net device
|
|
* @netdev: The associated net device
|
|
*
|
|
* Must be called after fcoe_lport_config() as it will use local port mutex
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev)
|
|
{
|
|
u32 mfs;
|
|
u64 wwnn, wwpn;
|
|
struct fcoe_interface *fcoe;
|
|
struct fcoe_port *port;
|
|
int vid = 0;
|
|
|
|
/* Setup lport private data to point to fcoe softc */
|
|
port = lport_priv(lport);
|
|
fcoe = port->fcoe;
|
|
|
|
/*
|
|
* Determine max frame size based on underlying device and optional
|
|
* user-configured limit. If the MFS is too low, fcoe_link_ok()
|
|
* will return 0, so do this first.
|
|
*/
|
|
mfs = netdev->mtu;
|
|
if (netdev->features & NETIF_F_FCOE_MTU) {
|
|
mfs = FCOE_MTU;
|
|
FCOE_NETDEV_DBG(netdev, "Supports FCOE_MTU of %d bytes\n", mfs);
|
|
}
|
|
mfs -= (sizeof(struct fcoe_hdr) + sizeof(struct fcoe_crc_eof));
|
|
if (fc_set_mfs(lport, mfs))
|
|
return -EINVAL;
|
|
|
|
/* offload features support */
|
|
if (netdev->features & NETIF_F_SG)
|
|
lport->sg_supp = 1;
|
|
|
|
if (netdev->features & NETIF_F_FCOE_CRC) {
|
|
lport->crc_offload = 1;
|
|
FCOE_NETDEV_DBG(netdev, "Supports FCCRC offload\n");
|
|
}
|
|
if (netdev->features & NETIF_F_FSO) {
|
|
lport->seq_offload = 1;
|
|
lport->lso_max = netdev->gso_max_size;
|
|
FCOE_NETDEV_DBG(netdev, "Supports LSO for max len 0x%x\n",
|
|
lport->lso_max);
|
|
}
|
|
if (netdev->fcoe_ddp_xid) {
|
|
lport->lro_enabled = 1;
|
|
lport->lro_xid = netdev->fcoe_ddp_xid;
|
|
FCOE_NETDEV_DBG(netdev, "Supports LRO for max xid 0x%x\n",
|
|
lport->lro_xid);
|
|
}
|
|
skb_queue_head_init(&port->fcoe_pending_queue);
|
|
port->fcoe_pending_queue_active = 0;
|
|
setup_timer(&port->timer, fcoe_queue_timer, (unsigned long)lport);
|
|
|
|
if (!lport->vport) {
|
|
/*
|
|
* Use NAA 1&2 (FC-FS Rev. 2.0, Sec. 15) to generate WWNN/WWPN:
|
|
* For WWNN, we use NAA 1 w/ bit 27-16 of word 0 as 0.
|
|
* For WWPN, we use NAA 2 w/ bit 27-16 of word 0 from VLAN ID
|
|
*/
|
|
if (netdev->priv_flags & IFF_802_1Q_VLAN)
|
|
vid = vlan_dev_vlan_id(netdev);
|
|
|
|
if (fcoe_get_wwn(netdev, &wwnn, NETDEV_FCOE_WWNN))
|
|
wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0);
|
|
fc_set_wwnn(lport, wwnn);
|
|
if (fcoe_get_wwn(netdev, &wwpn, NETDEV_FCOE_WWPN))
|
|
wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr,
|
|
2, vid);
|
|
fc_set_wwpn(lport, wwpn);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_shost_config() - Set up the SCSI host associated with a local port
|
|
* @lport: The local port
|
|
* @shost: The SCSI host to associate with the local port
|
|
* @dev: The device associated with the SCSI host
|
|
*
|
|
* Must be called after fcoe_lport_config() and fcoe_netdev_config()
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_shost_config(struct fc_lport *lport, struct Scsi_Host *shost,
|
|
struct device *dev)
|
|
{
|
|
int rc = 0;
|
|
|
|
/* lport scsi host config */
|
|
lport->host->max_lun = FCOE_MAX_LUN;
|
|
lport->host->max_id = FCOE_MAX_FCP_TARGET;
|
|
lport->host->max_channel = 0;
|
|
if (lport->vport)
|
|
lport->host->transportt = fcoe_vport_transport_template;
|
|
else
|
|
lport->host->transportt = fcoe_transport_template;
|
|
|
|
/* add the new host to the SCSI-ml */
|
|
rc = scsi_add_host(lport->host, dev);
|
|
if (rc) {
|
|
FCOE_NETDEV_DBG(fcoe_netdev(lport), "fcoe_shost_config: "
|
|
"error on scsi_add_host\n");
|
|
return rc;
|
|
}
|
|
|
|
if (!lport->vport)
|
|
fc_host_max_npiv_vports(lport->host) = USHORT_MAX;
|
|
|
|
snprintf(fc_host_symbolic_name(lport->host), FC_SYMBOLIC_NAME_SIZE,
|
|
"%s v%s over %s", FCOE_NAME, FCOE_VERSION,
|
|
fcoe_netdev(lport)->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_oem_match() - The match routine for the offloaded exchange manager
|
|
* @fp: The I/O frame
|
|
*
|
|
* This routine will be associated with an exchange manager (EM). When
|
|
* the libfc exchange handling code is looking for an EM to use it will
|
|
* call this routine and pass it the frame that it wishes to send. This
|
|
* routine will return True if the associated EM is to be used and False
|
|
* if the echange code should continue looking for an EM.
|
|
*
|
|
* The offload EM that this routine is associated with will handle any
|
|
* packets that are for SCSI read requests.
|
|
*
|
|
* Returns: True for read types I/O, otherwise returns false.
|
|
*/
|
|
bool fcoe_oem_match(struct fc_frame *fp)
|
|
{
|
|
return fc_fcp_is_read(fr_fsp(fp)) &&
|
|
(fr_fsp(fp)->data_len > fcoe_ddp_min);
|
|
}
|
|
|
|
/**
|
|
* fcoe_em_config() - Allocate and configure an exchange manager
|
|
* @lport: The local port that the new EM will be associated with
|
|
*
|
|
* Returns: 0 on success
|
|
*/
|
|
static inline int fcoe_em_config(struct fc_lport *lport)
|
|
{
|
|
struct fcoe_port *port = lport_priv(lport);
|
|
struct fcoe_interface *fcoe = port->fcoe;
|
|
struct fcoe_interface *oldfcoe = NULL;
|
|
struct net_device *old_real_dev, *cur_real_dev;
|
|
u16 min_xid = FCOE_MIN_XID;
|
|
u16 max_xid = FCOE_MAX_XID;
|
|
|
|
/*
|
|
* Check if need to allocate an em instance for
|
|
* offload exchange ids to be shared across all VN_PORTs/lport.
|
|
*/
|
|
if (!lport->lro_enabled || !lport->lro_xid ||
|
|
(lport->lro_xid >= max_xid)) {
|
|
lport->lro_xid = 0;
|
|
goto skip_oem;
|
|
}
|
|
|
|
/*
|
|
* Reuse existing offload em instance in case
|
|
* it is already allocated on real eth device
|
|
*/
|
|
if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN)
|
|
cur_real_dev = vlan_dev_real_dev(fcoe->netdev);
|
|
else
|
|
cur_real_dev = fcoe->netdev;
|
|
|
|
list_for_each_entry(oldfcoe, &fcoe_hostlist, list) {
|
|
if (oldfcoe->netdev->priv_flags & IFF_802_1Q_VLAN)
|
|
old_real_dev = vlan_dev_real_dev(oldfcoe->netdev);
|
|
else
|
|
old_real_dev = oldfcoe->netdev;
|
|
|
|
if (cur_real_dev == old_real_dev) {
|
|
fcoe->oem = oldfcoe->oem;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (fcoe->oem) {
|
|
if (!fc_exch_mgr_add(lport, fcoe->oem, fcoe_oem_match)) {
|
|
printk(KERN_ERR "fcoe_em_config: failed to add "
|
|
"offload em:%p on interface:%s\n",
|
|
fcoe->oem, fcoe->netdev->name);
|
|
return -ENOMEM;
|
|
}
|
|
} else {
|
|
fcoe->oem = fc_exch_mgr_alloc(lport, FC_CLASS_3,
|
|
FCOE_MIN_XID, lport->lro_xid,
|
|
fcoe_oem_match);
|
|
if (!fcoe->oem) {
|
|
printk(KERN_ERR "fcoe_em_config: failed to allocate "
|
|
"em for offload exches on interface:%s\n",
|
|
fcoe->netdev->name);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Exclude offload EM xid range from next EM xid range.
|
|
*/
|
|
min_xid += lport->lro_xid + 1;
|
|
|
|
skip_oem:
|
|
if (!fc_exch_mgr_alloc(lport, FC_CLASS_3, min_xid, max_xid, NULL)) {
|
|
printk(KERN_ERR "fcoe_em_config: failed to "
|
|
"allocate em on interface %s\n", fcoe->netdev->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_if_destroy() - Tear down a SW FCoE instance
|
|
* @lport: The local port to be destroyed
|
|
*/
|
|
static void fcoe_if_destroy(struct fc_lport *lport)
|
|
{
|
|
struct fcoe_port *port = lport_priv(lport);
|
|
struct fcoe_interface *fcoe = port->fcoe;
|
|
struct net_device *netdev = fcoe->netdev;
|
|
|
|
FCOE_NETDEV_DBG(netdev, "Destroying interface\n");
|
|
|
|
/* Logout of the fabric */
|
|
fc_fabric_logoff(lport);
|
|
|
|
/* Cleanup the fc_lport */
|
|
fc_lport_destroy(lport);
|
|
fc_fcp_destroy(lport);
|
|
|
|
/* Stop the transmit retry timer */
|
|
del_timer_sync(&port->timer);
|
|
|
|
/* Free existing transmit skbs */
|
|
fcoe_clean_pending_queue(lport);
|
|
|
|
rtnl_lock();
|
|
if (!is_zero_ether_addr(port->data_src_addr))
|
|
dev_unicast_delete(netdev, port->data_src_addr);
|
|
rtnl_unlock();
|
|
|
|
/* receives may not be stopped until after this */
|
|
fcoe_interface_put(fcoe);
|
|
|
|
/* Free queued packets for the per-CPU receive threads */
|
|
fcoe_percpu_clean(lport);
|
|
|
|
/* Detach from the scsi-ml */
|
|
fc_remove_host(lport->host);
|
|
scsi_remove_host(lport->host);
|
|
|
|
/* There are no more rports or I/O, free the EM */
|
|
fc_exch_mgr_free(lport);
|
|
|
|
/* Free memory used by statistical counters */
|
|
fc_lport_free_stats(lport);
|
|
|
|
/* Release the Scsi_Host */
|
|
scsi_host_put(lport->host);
|
|
}
|
|
|
|
/**
|
|
* fcoe_ddp_setup() - Call a LLD's ddp_setup through the net device
|
|
* @lport: The local port to setup DDP for
|
|
* @xid: The exchange ID for this DDP transfer
|
|
* @sgl: The scatterlist describing this transfer
|
|
* @sgc: The number of sg items
|
|
*
|
|
* Returns: 0 if the DDP context was not configured
|
|
*/
|
|
static int fcoe_ddp_setup(struct fc_lport *lport, u16 xid,
|
|
struct scatterlist *sgl, unsigned int sgc)
|
|
{
|
|
struct net_device *netdev = fcoe_netdev(lport);
|
|
|
|
if (netdev->netdev_ops->ndo_fcoe_ddp_setup)
|
|
return netdev->netdev_ops->ndo_fcoe_ddp_setup(netdev,
|
|
xid, sgl,
|
|
sgc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_ddp_done() - Call a LLD's ddp_done through the net device
|
|
* @lport: The local port to complete DDP on
|
|
* @xid: The exchange ID for this DDP transfer
|
|
*
|
|
* Returns: the length of data that have been completed by DDP
|
|
*/
|
|
static int fcoe_ddp_done(struct fc_lport *lport, u16 xid)
|
|
{
|
|
struct net_device *netdev = fcoe_netdev(lport);
|
|
|
|
if (netdev->netdev_ops->ndo_fcoe_ddp_done)
|
|
return netdev->netdev_ops->ndo_fcoe_ddp_done(netdev, xid);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_if_create() - Create a FCoE instance on an interface
|
|
* @fcoe: The FCoE interface to create a local port on
|
|
* @parent: The device pointer to be the parent in sysfs for the SCSI host
|
|
* @npiv: Indicates if the port is a vport or not
|
|
*
|
|
* Creates a fc_lport instance and a Scsi_Host instance and configure them.
|
|
*
|
|
* Returns: The allocated fc_lport or an error pointer
|
|
*/
|
|
static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe,
|
|
struct device *parent, int npiv)
|
|
{
|
|
struct net_device *netdev = fcoe->netdev;
|
|
struct fc_lport *lport = NULL;
|
|
struct fcoe_port *port;
|
|
struct Scsi_Host *shost;
|
|
int rc;
|
|
/*
|
|
* parent is only a vport if npiv is 1,
|
|
* but we'll only use vport in that case so go ahead and set it
|
|
*/
|
|
struct fc_vport *vport = dev_to_vport(parent);
|
|
|
|
FCOE_NETDEV_DBG(netdev, "Create Interface\n");
|
|
|
|
if (!npiv) {
|
|
lport = libfc_host_alloc(&fcoe_shost_template,
|
|
sizeof(struct fcoe_port));
|
|
} else {
|
|
lport = libfc_vport_create(vport,
|
|
sizeof(struct fcoe_port));
|
|
}
|
|
if (!lport) {
|
|
FCOE_NETDEV_DBG(netdev, "Could not allocate host structure\n");
|
|
rc = -ENOMEM;
|
|
goto out;
|
|
}
|
|
shost = lport->host;
|
|
port = lport_priv(lport);
|
|
port->lport = lport;
|
|
port->fcoe = fcoe;
|
|
INIT_WORK(&port->destroy_work, fcoe_destroy_work);
|
|
|
|
/* configure a fc_lport including the exchange manager */
|
|
rc = fcoe_lport_config(lport);
|
|
if (rc) {
|
|
FCOE_NETDEV_DBG(netdev, "Could not configure lport for the "
|
|
"interface\n");
|
|
goto out_host_put;
|
|
}
|
|
|
|
if (npiv) {
|
|
FCOE_NETDEV_DBG(netdev, "Setting vport names, 0x%llX 0x%llX\n",
|
|
vport->node_name, vport->port_name);
|
|
fc_set_wwnn(lport, vport->node_name);
|
|
fc_set_wwpn(lport, vport->port_name);
|
|
}
|
|
|
|
/* configure lport network properties */
|
|
rc = fcoe_netdev_config(lport, netdev);
|
|
if (rc) {
|
|
FCOE_NETDEV_DBG(netdev, "Could not configure netdev for the "
|
|
"interface\n");
|
|
goto out_lp_destroy;
|
|
}
|
|
|
|
/* configure lport scsi host properties */
|
|
rc = fcoe_shost_config(lport, shost, parent);
|
|
if (rc) {
|
|
FCOE_NETDEV_DBG(netdev, "Could not configure shost for the "
|
|
"interface\n");
|
|
goto out_lp_destroy;
|
|
}
|
|
|
|
/* Initialize the library */
|
|
rc = fcoe_libfc_config(lport, &fcoe_libfc_fcn_templ);
|
|
if (rc) {
|
|
FCOE_NETDEV_DBG(netdev, "Could not configure libfc for the "
|
|
"interface\n");
|
|
goto out_lp_destroy;
|
|
}
|
|
|
|
if (!npiv) {
|
|
/*
|
|
* fcoe_em_alloc() and fcoe_hostlist_add() both
|
|
* need to be atomic with respect to other changes to the
|
|
* hostlist since fcoe_em_alloc() looks for an existing EM
|
|
* instance on host list updated by fcoe_hostlist_add().
|
|
*
|
|
* This is currently handled through the fcoe_config_mutex
|
|
* begin held.
|
|
*/
|
|
|
|
/* lport exch manager allocation */
|
|
rc = fcoe_em_config(lport);
|
|
if (rc) {
|
|
FCOE_NETDEV_DBG(netdev, "Could not configure the EM "
|
|
"for the interface\n");
|
|
goto out_lp_destroy;
|
|
}
|
|
}
|
|
|
|
fcoe_interface_get(fcoe);
|
|
return lport;
|
|
|
|
out_lp_destroy:
|
|
fc_exch_mgr_free(lport);
|
|
out_host_put:
|
|
scsi_host_put(lport->host);
|
|
out:
|
|
return ERR_PTR(rc);
|
|
}
|
|
|
|
/**
|
|
* fcoe_if_init() - Initialization routine for fcoe.ko
|
|
*
|
|
* Attaches the SW FCoE transport to the FC transport
|
|
*
|
|
* Returns: 0 on success
|
|
*/
|
|
static int __init fcoe_if_init(void)
|
|
{
|
|
/* attach to scsi transport */
|
|
fcoe_transport_template = fc_attach_transport(&fcoe_transport_function);
|
|
fcoe_vport_transport_template =
|
|
fc_attach_transport(&fcoe_vport_transport_function);
|
|
|
|
if (!fcoe_transport_template) {
|
|
printk(KERN_ERR "fcoe: Failed to attach to the FC transport\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_if_exit() - Tear down fcoe.ko
|
|
*
|
|
* Detaches the SW FCoE transport from the FC transport
|
|
*
|
|
* Returns: 0 on success
|
|
*/
|
|
int __exit fcoe_if_exit(void)
|
|
{
|
|
fc_release_transport(fcoe_transport_template);
|
|
fc_release_transport(fcoe_vport_transport_template);
|
|
fcoe_transport_template = NULL;
|
|
fcoe_vport_transport_template = NULL;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_percpu_thread_create() - Create a receive thread for an online CPU
|
|
* @cpu: The CPU index of the CPU to create a receive thread for
|
|
*/
|
|
static void fcoe_percpu_thread_create(unsigned int cpu)
|
|
{
|
|
struct fcoe_percpu_s *p;
|
|
struct task_struct *thread;
|
|
|
|
p = &per_cpu(fcoe_percpu, cpu);
|
|
|
|
thread = kthread_create(fcoe_percpu_receive_thread,
|
|
(void *)p, "fcoethread/%d", cpu);
|
|
|
|
if (likely(!IS_ERR(thread))) {
|
|
kthread_bind(thread, cpu);
|
|
wake_up_process(thread);
|
|
|
|
spin_lock_bh(&p->fcoe_rx_list.lock);
|
|
p->thread = thread;
|
|
spin_unlock_bh(&p->fcoe_rx_list.lock);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* fcoe_percpu_thread_destroy() - Remove the receive thread of a CPU
|
|
* @cpu: The CPU index of the CPU whose receive thread is to be destroyed
|
|
*
|
|
* Destroys a per-CPU Rx thread. Any pending skbs are moved to the
|
|
* current CPU's Rx thread. If the thread being destroyed is bound to
|
|
* the CPU processing this context the skbs will be freed.
|
|
*/
|
|
static void fcoe_percpu_thread_destroy(unsigned int cpu)
|
|
{
|
|
struct fcoe_percpu_s *p;
|
|
struct task_struct *thread;
|
|
struct page *crc_eof;
|
|
struct sk_buff *skb;
|
|
#ifdef CONFIG_SMP
|
|
struct fcoe_percpu_s *p0;
|
|
unsigned targ_cpu = smp_processor_id();
|
|
#endif /* CONFIG_SMP */
|
|
|
|
FCOE_DBG("Destroying receive thread for CPU %d\n", cpu);
|
|
|
|
/* Prevent any new skbs from being queued for this CPU. */
|
|
p = &per_cpu(fcoe_percpu, cpu);
|
|
spin_lock_bh(&p->fcoe_rx_list.lock);
|
|
thread = p->thread;
|
|
p->thread = NULL;
|
|
crc_eof = p->crc_eof_page;
|
|
p->crc_eof_page = NULL;
|
|
p->crc_eof_offset = 0;
|
|
spin_unlock_bh(&p->fcoe_rx_list.lock);
|
|
|
|
#ifdef CONFIG_SMP
|
|
/*
|
|
* Don't bother moving the skb's if this context is running
|
|
* on the same CPU that is having its thread destroyed. This
|
|
* can easily happen when the module is removed.
|
|
*/
|
|
if (cpu != targ_cpu) {
|
|
p0 = &per_cpu(fcoe_percpu, targ_cpu);
|
|
spin_lock_bh(&p0->fcoe_rx_list.lock);
|
|
if (p0->thread) {
|
|
FCOE_DBG("Moving frames from CPU %d to CPU %d\n",
|
|
cpu, targ_cpu);
|
|
|
|
while ((skb = __skb_dequeue(&p->fcoe_rx_list)) != NULL)
|
|
__skb_queue_tail(&p0->fcoe_rx_list, skb);
|
|
spin_unlock_bh(&p0->fcoe_rx_list.lock);
|
|
} else {
|
|
/*
|
|
* The targeted CPU is not initialized and cannot accept
|
|
* new skbs. Unlock the targeted CPU and drop the skbs
|
|
* on the CPU that is going offline.
|
|
*/
|
|
while ((skb = __skb_dequeue(&p->fcoe_rx_list)) != NULL)
|
|
kfree_skb(skb);
|
|
spin_unlock_bh(&p0->fcoe_rx_list.lock);
|
|
}
|
|
} else {
|
|
/*
|
|
* This scenario occurs when the module is being removed
|
|
* and all threads are being destroyed. skbs will continue
|
|
* to be shifted from the CPU thread that is being removed
|
|
* to the CPU thread associated with the CPU that is processing
|
|
* the module removal. Once there is only one CPU Rx thread it
|
|
* will reach this case and we will drop all skbs and later
|
|
* stop the thread.
|
|
*/
|
|
spin_lock_bh(&p->fcoe_rx_list.lock);
|
|
while ((skb = __skb_dequeue(&p->fcoe_rx_list)) != NULL)
|
|
kfree_skb(skb);
|
|
spin_unlock_bh(&p->fcoe_rx_list.lock);
|
|
}
|
|
#else
|
|
/*
|
|
* This a non-SMP scenario where the singular Rx thread is
|
|
* being removed. Free all skbs and stop the thread.
|
|
*/
|
|
spin_lock_bh(&p->fcoe_rx_list.lock);
|
|
while ((skb = __skb_dequeue(&p->fcoe_rx_list)) != NULL)
|
|
kfree_skb(skb);
|
|
spin_unlock_bh(&p->fcoe_rx_list.lock);
|
|
#endif
|
|
|
|
if (thread)
|
|
kthread_stop(thread);
|
|
|
|
if (crc_eof)
|
|
put_page(crc_eof);
|
|
}
|
|
|
|
/**
|
|
* fcoe_cpu_callback() - Handler for CPU hotplug events
|
|
* @nfb: The callback data block
|
|
* @action: The event triggering the callback
|
|
* @hcpu: The index of the CPU that the event is for
|
|
*
|
|
* This creates or destroys per-CPU data for fcoe
|
|
*
|
|
* Returns NOTIFY_OK always.
|
|
*/
|
|
static int fcoe_cpu_callback(struct notifier_block *nfb,
|
|
unsigned long action, void *hcpu)
|
|
{
|
|
unsigned cpu = (unsigned long)hcpu;
|
|
|
|
switch (action) {
|
|
case CPU_ONLINE:
|
|
case CPU_ONLINE_FROZEN:
|
|
FCOE_DBG("CPU %x online: Create Rx thread\n", cpu);
|
|
fcoe_percpu_thread_create(cpu);
|
|
break;
|
|
case CPU_DEAD:
|
|
case CPU_DEAD_FROZEN:
|
|
FCOE_DBG("CPU %x offline: Remove Rx thread\n", cpu);
|
|
fcoe_percpu_thread_destroy(cpu);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
/**
|
|
* fcoe_rcv() - Receive packets from a net device
|
|
* @skb: The received packet
|
|
* @netdev: The net device that the packet was received on
|
|
* @ptype: The packet type context
|
|
* @olddev: The last device net device
|
|
*
|
|
* This routine is called by NET_RX_SOFTIRQ. It receives a packet, builds a
|
|
* FC frame and passes the frame to libfc.
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev,
|
|
struct packet_type *ptype, struct net_device *olddev)
|
|
{
|
|
struct fc_lport *lport;
|
|
struct fcoe_rcv_info *fr;
|
|
struct fcoe_interface *fcoe;
|
|
struct fc_frame_header *fh;
|
|
struct fcoe_percpu_s *fps;
|
|
unsigned int cpu;
|
|
|
|
fcoe = container_of(ptype, struct fcoe_interface, fcoe_packet_type);
|
|
lport = fcoe->ctlr.lp;
|
|
if (unlikely(!lport)) {
|
|
FCOE_NETDEV_DBG(netdev, "Cannot find hba structure");
|
|
goto err2;
|
|
}
|
|
if (!lport->link_up)
|
|
goto err2;
|
|
|
|
FCOE_NETDEV_DBG(netdev, "skb_info: len:%d data_len:%d head:%p "
|
|
"data:%p tail:%p end:%p sum:%d dev:%s",
|
|
skb->len, skb->data_len, skb->head, skb->data,
|
|
skb_tail_pointer(skb), skb_end_pointer(skb),
|
|
skb->csum, skb->dev ? skb->dev->name : "<NULL>");
|
|
|
|
/* check for FCOE packet type */
|
|
if (unlikely(eth_hdr(skb)->h_proto != htons(ETH_P_FCOE))) {
|
|
FCOE_NETDEV_DBG(netdev, "Wrong FC type frame");
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* Check for minimum frame length, and make sure required FCoE
|
|
* and FC headers are pulled into the linear data area.
|
|
*/
|
|
if (unlikely((skb->len < FCOE_MIN_FRAME) ||
|
|
!pskb_may_pull(skb, FCOE_HEADER_LEN)))
|
|
goto err;
|
|
|
|
skb_set_transport_header(skb, sizeof(struct fcoe_hdr));
|
|
fh = (struct fc_frame_header *) skb_transport_header(skb);
|
|
|
|
fr = fcoe_dev_from_skb(skb);
|
|
fr->fr_dev = lport;
|
|
fr->ptype = ptype;
|
|
|
|
/*
|
|
* In case the incoming frame's exchange is originated from
|
|
* the initiator, then received frame's exchange id is ANDed
|
|
* with fc_cpu_mask bits to get the same cpu on which exchange
|
|
* was originated, otherwise just use the current cpu.
|
|
*/
|
|
if (ntoh24(fh->fh_f_ctl) & FC_FC_EX_CTX)
|
|
cpu = ntohs(fh->fh_ox_id) & fc_cpu_mask;
|
|
else
|
|
cpu = smp_processor_id();
|
|
|
|
fps = &per_cpu(fcoe_percpu, cpu);
|
|
spin_lock_bh(&fps->fcoe_rx_list.lock);
|
|
if (unlikely(!fps->thread)) {
|
|
/*
|
|
* The targeted CPU is not ready, let's target
|
|
* the first CPU now. For non-SMP systems this
|
|
* will check the same CPU twice.
|
|
*/
|
|
FCOE_NETDEV_DBG(netdev, "CPU is online, but no receive thread "
|
|
"ready for incoming skb- using first online "
|
|
"CPU.\n");
|
|
|
|
spin_unlock_bh(&fps->fcoe_rx_list.lock);
|
|
cpu = cpumask_first(cpu_online_mask);
|
|
fps = &per_cpu(fcoe_percpu, cpu);
|
|
spin_lock_bh(&fps->fcoe_rx_list.lock);
|
|
if (!fps->thread) {
|
|
spin_unlock_bh(&fps->fcoe_rx_list.lock);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* We now have a valid CPU that we're targeting for
|
|
* this skb. We also have this receive thread locked,
|
|
* so we're free to queue skbs into it's queue.
|
|
*/
|
|
|
|
/* If this is a SCSI-FCP frame, and this is already executing on the
|
|
* correct CPU, and the queue for this CPU is empty, then go ahead
|
|
* and process the frame directly in the softirq context.
|
|
* This lets us process completions without context switching from the
|
|
* NET_RX softirq, to our receive processing thread, and then back to
|
|
* BLOCK softirq context.
|
|
*/
|
|
if (fh->fh_type == FC_TYPE_FCP &&
|
|
cpu == smp_processor_id() &&
|
|
skb_queue_empty(&fps->fcoe_rx_list)) {
|
|
spin_unlock_bh(&fps->fcoe_rx_list.lock);
|
|
fcoe_recv_frame(skb);
|
|
} else {
|
|
__skb_queue_tail(&fps->fcoe_rx_list, skb);
|
|
if (fps->fcoe_rx_list.qlen == 1)
|
|
wake_up_process(fps->thread);
|
|
spin_unlock_bh(&fps->fcoe_rx_list.lock);
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
fc_lport_get_stats(lport)->ErrorFrames++;
|
|
|
|
err2:
|
|
kfree_skb(skb);
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* fcoe_start_io() - Start FCoE I/O
|
|
* @skb: The packet to be transmitted
|
|
*
|
|
* This routine is called from the net device to start transmitting
|
|
* FCoE packets.
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static inline int fcoe_start_io(struct sk_buff *skb)
|
|
{
|
|
struct sk_buff *nskb;
|
|
int rc;
|
|
|
|
nskb = skb_clone(skb, GFP_ATOMIC);
|
|
rc = dev_queue_xmit(nskb);
|
|
if (rc != 0)
|
|
return rc;
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_get_paged_crc_eof() - Allocate a page to be used for the trailer CRC
|
|
* @skb: The packet to be transmitted
|
|
* @tlen: The total length of the trailer
|
|
*
|
|
* This routine allocates a page for frame trailers. The page is re-used if
|
|
* there is enough room left on it for the current trailer. If there isn't
|
|
* enough buffer left a new page is allocated for the trailer. Reference to
|
|
* the page from this function as well as the skbs using the page fragments
|
|
* ensure that the page is freed at the appropriate time.
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen)
|
|
{
|
|
struct fcoe_percpu_s *fps;
|
|
struct page *page;
|
|
|
|
fps = &get_cpu_var(fcoe_percpu);
|
|
page = fps->crc_eof_page;
|
|
if (!page) {
|
|
page = alloc_page(GFP_ATOMIC);
|
|
if (!page) {
|
|
put_cpu_var(fcoe_percpu);
|
|
return -ENOMEM;
|
|
}
|
|
fps->crc_eof_page = page;
|
|
fps->crc_eof_offset = 0;
|
|
}
|
|
|
|
get_page(page);
|
|
skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, page,
|
|
fps->crc_eof_offset, tlen);
|
|
skb->len += tlen;
|
|
skb->data_len += tlen;
|
|
skb->truesize += tlen;
|
|
fps->crc_eof_offset += sizeof(struct fcoe_crc_eof);
|
|
|
|
if (fps->crc_eof_offset >= PAGE_SIZE) {
|
|
fps->crc_eof_page = NULL;
|
|
fps->crc_eof_offset = 0;
|
|
put_page(page);
|
|
}
|
|
put_cpu_var(fcoe_percpu);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_fc_crc() - Calculates the CRC for a given frame
|
|
* @fp: The frame to be checksumed
|
|
*
|
|
* This uses crc32() routine to calculate the CRC for a frame
|
|
*
|
|
* Return: The 32 bit CRC value
|
|
*/
|
|
u32 fcoe_fc_crc(struct fc_frame *fp)
|
|
{
|
|
struct sk_buff *skb = fp_skb(fp);
|
|
struct skb_frag_struct *frag;
|
|
unsigned char *data;
|
|
unsigned long off, len, clen;
|
|
u32 crc;
|
|
unsigned i;
|
|
|
|
crc = crc32(~0, skb->data, skb_headlen(skb));
|
|
|
|
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
|
|
frag = &skb_shinfo(skb)->frags[i];
|
|
off = frag->page_offset;
|
|
len = frag->size;
|
|
while (len > 0) {
|
|
clen = min(len, PAGE_SIZE - (off & ~PAGE_MASK));
|
|
data = kmap_atomic(frag->page + (off >> PAGE_SHIFT),
|
|
KM_SKB_DATA_SOFTIRQ);
|
|
crc = crc32(crc, data + (off & ~PAGE_MASK), clen);
|
|
kunmap_atomic(data, KM_SKB_DATA_SOFTIRQ);
|
|
off += clen;
|
|
len -= clen;
|
|
}
|
|
}
|
|
return crc;
|
|
}
|
|
|
|
/**
|
|
* fcoe_xmit() - Transmit a FCoE frame
|
|
* @lport: The local port that the frame is to be transmitted for
|
|
* @fp: The frame to be transmitted
|
|
*
|
|
* Return: 0 for success
|
|
*/
|
|
int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp)
|
|
{
|
|
int wlen;
|
|
u32 crc;
|
|
struct ethhdr *eh;
|
|
struct fcoe_crc_eof *cp;
|
|
struct sk_buff *skb;
|
|
struct fcoe_dev_stats *stats;
|
|
struct fc_frame_header *fh;
|
|
unsigned int hlen; /* header length implies the version */
|
|
unsigned int tlen; /* trailer length */
|
|
unsigned int elen; /* eth header, may include vlan */
|
|
struct fcoe_port *port = lport_priv(lport);
|
|
struct fcoe_interface *fcoe = port->fcoe;
|
|
u8 sof, eof;
|
|
struct fcoe_hdr *hp;
|
|
|
|
WARN_ON((fr_len(fp) % sizeof(u32)) != 0);
|
|
|
|
fh = fc_frame_header_get(fp);
|
|
skb = fp_skb(fp);
|
|
wlen = skb->len / FCOE_WORD_TO_BYTE;
|
|
|
|
if (!lport->link_up) {
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
if (unlikely(fh->fh_r_ctl == FC_RCTL_ELS_REQ) &&
|
|
fcoe_ctlr_els_send(&fcoe->ctlr, lport, skb))
|
|
return 0;
|
|
|
|
sof = fr_sof(fp);
|
|
eof = fr_eof(fp);
|
|
|
|
elen = sizeof(struct ethhdr);
|
|
hlen = sizeof(struct fcoe_hdr);
|
|
tlen = sizeof(struct fcoe_crc_eof);
|
|
wlen = (skb->len - tlen + sizeof(crc)) / FCOE_WORD_TO_BYTE;
|
|
|
|
/* crc offload */
|
|
if (likely(lport->crc_offload)) {
|
|
skb->ip_summed = CHECKSUM_PARTIAL;
|
|
skb->csum_start = skb_headroom(skb);
|
|
skb->csum_offset = skb->len;
|
|
crc = 0;
|
|
} else {
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
crc = fcoe_fc_crc(fp);
|
|
}
|
|
|
|
/* copy port crc and eof to the skb buff */
|
|
if (skb_is_nonlinear(skb)) {
|
|
skb_frag_t *frag;
|
|
if (fcoe_get_paged_crc_eof(skb, tlen)) {
|
|
kfree_skb(skb);
|
|
return -ENOMEM;
|
|
}
|
|
frag = &skb_shinfo(skb)->frags[skb_shinfo(skb)->nr_frags - 1];
|
|
cp = kmap_atomic(frag->page, KM_SKB_DATA_SOFTIRQ)
|
|
+ frag->page_offset;
|
|
} else {
|
|
cp = (struct fcoe_crc_eof *)skb_put(skb, tlen);
|
|
}
|
|
|
|
memset(cp, 0, sizeof(*cp));
|
|
cp->fcoe_eof = eof;
|
|
cp->fcoe_crc32 = cpu_to_le32(~crc);
|
|
|
|
if (skb_is_nonlinear(skb)) {
|
|
kunmap_atomic(cp, KM_SKB_DATA_SOFTIRQ);
|
|
cp = NULL;
|
|
}
|
|
|
|
/* adjust skb network/transport offsets to match mac/fcoe/port */
|
|
skb_push(skb, elen + hlen);
|
|
skb_reset_mac_header(skb);
|
|
skb_reset_network_header(skb);
|
|
skb->mac_len = elen;
|
|
skb->protocol = htons(ETH_P_FCOE);
|
|
skb->dev = fcoe->netdev;
|
|
|
|
/* fill up mac and fcoe headers */
|
|
eh = eth_hdr(skb);
|
|
eh->h_proto = htons(ETH_P_FCOE);
|
|
if (fcoe->ctlr.map_dest)
|
|
fc_fcoe_set_mac(eh->h_dest, fh->fh_d_id);
|
|
else
|
|
/* insert GW address */
|
|
memcpy(eh->h_dest, fcoe->ctlr.dest_addr, ETH_ALEN);
|
|
|
|
if (unlikely(fcoe->ctlr.flogi_oxid != FC_XID_UNKNOWN))
|
|
memcpy(eh->h_source, fcoe->ctlr.ctl_src_addr, ETH_ALEN);
|
|
else
|
|
memcpy(eh->h_source, port->data_src_addr, ETH_ALEN);
|
|
|
|
hp = (struct fcoe_hdr *)(eh + 1);
|
|
memset(hp, 0, sizeof(*hp));
|
|
if (FC_FCOE_VER)
|
|
FC_FCOE_ENCAPS_VER(hp, FC_FCOE_VER);
|
|
hp->fcoe_sof = sof;
|
|
|
|
/* fcoe lso, mss is in max_payload which is non-zero for FCP data */
|
|
if (lport->seq_offload && fr_max_payload(fp)) {
|
|
skb_shinfo(skb)->gso_type = SKB_GSO_FCOE;
|
|
skb_shinfo(skb)->gso_size = fr_max_payload(fp);
|
|
} else {
|
|
skb_shinfo(skb)->gso_type = 0;
|
|
skb_shinfo(skb)->gso_size = 0;
|
|
}
|
|
/* update tx stats: regardless if LLD fails */
|
|
stats = fc_lport_get_stats(lport);
|
|
stats->TxFrames++;
|
|
stats->TxWords += wlen;
|
|
|
|
/* send down to lld */
|
|
fr_dev(fp) = lport;
|
|
if (port->fcoe_pending_queue.qlen)
|
|
fcoe_check_wait_queue(lport, skb);
|
|
else if (fcoe_start_io(skb))
|
|
fcoe_check_wait_queue(lport, skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_percpu_flush_done() - Indicate per-CPU queue flush completion
|
|
* @skb: The completed skb (argument required by destructor)
|
|
*/
|
|
static void fcoe_percpu_flush_done(struct sk_buff *skb)
|
|
{
|
|
complete(&fcoe_flush_completion);
|
|
}
|
|
|
|
/**
|
|
* fcoe_recv_frame() - process a single received frame
|
|
* @skb: frame to process
|
|
*/
|
|
static void fcoe_recv_frame(struct sk_buff *skb)
|
|
{
|
|
u32 fr_len;
|
|
struct fc_lport *lport;
|
|
struct fcoe_rcv_info *fr;
|
|
struct fcoe_dev_stats *stats;
|
|
struct fc_frame_header *fh;
|
|
struct fcoe_crc_eof crc_eof;
|
|
struct fc_frame *fp;
|
|
u8 *mac = NULL;
|
|
struct fcoe_port *port;
|
|
struct fcoe_hdr *hp;
|
|
|
|
fr = fcoe_dev_from_skb(skb);
|
|
lport = fr->fr_dev;
|
|
if (unlikely(!lport)) {
|
|
if (skb->destructor != fcoe_percpu_flush_done)
|
|
FCOE_NETDEV_DBG(skb->dev, "NULL lport in skb");
|
|
kfree_skb(skb);
|
|
return;
|
|
}
|
|
|
|
FCOE_NETDEV_DBG(skb->dev, "skb_info: len:%d data_len:%d "
|
|
"head:%p data:%p tail:%p end:%p sum:%d dev:%s",
|
|
skb->len, skb->data_len,
|
|
skb->head, skb->data, skb_tail_pointer(skb),
|
|
skb_end_pointer(skb), skb->csum,
|
|
skb->dev ? skb->dev->name : "<NULL>");
|
|
|
|
/*
|
|
* Save source MAC address before discarding header.
|
|
*/
|
|
port = lport_priv(lport);
|
|
if (skb_is_nonlinear(skb))
|
|
skb_linearize(skb); /* not ideal */
|
|
mac = eth_hdr(skb)->h_source;
|
|
|
|
/*
|
|
* Frame length checks and setting up the header pointers
|
|
* was done in fcoe_rcv already.
|
|
*/
|
|
hp = (struct fcoe_hdr *) skb_network_header(skb);
|
|
fh = (struct fc_frame_header *) skb_transport_header(skb);
|
|
|
|
stats = fc_lport_get_stats(lport);
|
|
if (unlikely(FC_FCOE_DECAPS_VER(hp) != FC_FCOE_VER)) {
|
|
if (stats->ErrorFrames < 5)
|
|
printk(KERN_WARNING "fcoe: FCoE version "
|
|
"mismatch: The frame has "
|
|
"version %x, but the "
|
|
"initiator supports version "
|
|
"%x\n", FC_FCOE_DECAPS_VER(hp),
|
|
FC_FCOE_VER);
|
|
stats->ErrorFrames++;
|
|
kfree_skb(skb);
|
|
return;
|
|
}
|
|
|
|
skb_pull(skb, sizeof(struct fcoe_hdr));
|
|
fr_len = skb->len - sizeof(struct fcoe_crc_eof);
|
|
|
|
stats->RxFrames++;
|
|
stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
|
|
|
|
fp = (struct fc_frame *)skb;
|
|
fc_frame_init(fp);
|
|
fr_dev(fp) = lport;
|
|
fr_sof(fp) = hp->fcoe_sof;
|
|
|
|
/* Copy out the CRC and EOF trailer for access */
|
|
if (skb_copy_bits(skb, fr_len, &crc_eof, sizeof(crc_eof))) {
|
|
kfree_skb(skb);
|
|
return;
|
|
}
|
|
fr_eof(fp) = crc_eof.fcoe_eof;
|
|
fr_crc(fp) = crc_eof.fcoe_crc32;
|
|
if (pskb_trim(skb, fr_len)) {
|
|
kfree_skb(skb);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* We only check CRC if no offload is available and if it is
|
|
* it's solicited data, in which case, the FCP layer would
|
|
* check it during the copy.
|
|
*/
|
|
if (lport->crc_offload &&
|
|
skb->ip_summed == CHECKSUM_UNNECESSARY)
|
|
fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
|
|
else
|
|
fr_flags(fp) |= FCPHF_CRC_UNCHECKED;
|
|
|
|
fh = fc_frame_header_get(fp);
|
|
if (fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA &&
|
|
fh->fh_type == FC_TYPE_FCP) {
|
|
fc_exch_recv(lport, fp);
|
|
return;
|
|
}
|
|
if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) {
|
|
if (le32_to_cpu(fr_crc(fp)) !=
|
|
~crc32(~0, skb->data, fr_len)) {
|
|
if (stats->InvalidCRCCount < 5)
|
|
printk(KERN_WARNING "fcoe: dropping "
|
|
"frame with CRC error\n");
|
|
stats->InvalidCRCCount++;
|
|
stats->ErrorFrames++;
|
|
fc_frame_free(fp);
|
|
return;
|
|
}
|
|
fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
|
|
}
|
|
fc_exch_recv(lport, fp);
|
|
}
|
|
|
|
/**
|
|
* fcoe_percpu_receive_thread() - The per-CPU packet receive thread
|
|
* @arg: The per-CPU context
|
|
*
|
|
* Return: 0 for success
|
|
*/
|
|
int fcoe_percpu_receive_thread(void *arg)
|
|
{
|
|
struct fcoe_percpu_s *p = arg;
|
|
struct sk_buff *skb;
|
|
|
|
set_user_nice(current, -20);
|
|
|
|
while (!kthread_should_stop()) {
|
|
|
|
spin_lock_bh(&p->fcoe_rx_list.lock);
|
|
while ((skb = __skb_dequeue(&p->fcoe_rx_list)) == NULL) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_unlock_bh(&p->fcoe_rx_list.lock);
|
|
schedule();
|
|
set_current_state(TASK_RUNNING);
|
|
if (kthread_should_stop())
|
|
return 0;
|
|
spin_lock_bh(&p->fcoe_rx_list.lock);
|
|
}
|
|
spin_unlock_bh(&p->fcoe_rx_list.lock);
|
|
fcoe_recv_frame(skb);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_check_wait_queue() - Attempt to clear the transmit backlog
|
|
* @lport: The local port whose backlog is to be cleared
|
|
*
|
|
* This empties the wait_queue, dequeues the head of the wait_queue queue
|
|
* and calls fcoe_start_io() for each packet. If all skb have been
|
|
* transmitted it returns the qlen. If an error occurs it restores
|
|
* wait_queue (to try again later) and returns -1.
|
|
*
|
|
* The wait_queue is used when the skb transmit fails. The failed skb
|
|
* will go in the wait_queue which will be emptied by the timer function or
|
|
* by the next skb transmit.
|
|
*/
|
|
static void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb)
|
|
{
|
|
struct fcoe_port *port = lport_priv(lport);
|
|
int rc;
|
|
|
|
spin_lock_bh(&port->fcoe_pending_queue.lock);
|
|
|
|
if (skb)
|
|
__skb_queue_tail(&port->fcoe_pending_queue, skb);
|
|
|
|
if (port->fcoe_pending_queue_active)
|
|
goto out;
|
|
port->fcoe_pending_queue_active = 1;
|
|
|
|
while (port->fcoe_pending_queue.qlen) {
|
|
/* keep qlen > 0 until fcoe_start_io succeeds */
|
|
port->fcoe_pending_queue.qlen++;
|
|
skb = __skb_dequeue(&port->fcoe_pending_queue);
|
|
|
|
spin_unlock_bh(&port->fcoe_pending_queue.lock);
|
|
rc = fcoe_start_io(skb);
|
|
spin_lock_bh(&port->fcoe_pending_queue.lock);
|
|
|
|
if (rc) {
|
|
__skb_queue_head(&port->fcoe_pending_queue, skb);
|
|
/* undo temporary increment above */
|
|
port->fcoe_pending_queue.qlen--;
|
|
break;
|
|
}
|
|
/* undo temporary increment above */
|
|
port->fcoe_pending_queue.qlen--;
|
|
}
|
|
|
|
if (port->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
|
|
lport->qfull = 0;
|
|
if (port->fcoe_pending_queue.qlen && !timer_pending(&port->timer))
|
|
mod_timer(&port->timer, jiffies + 2);
|
|
port->fcoe_pending_queue_active = 0;
|
|
out:
|
|
if (port->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
|
|
lport->qfull = 1;
|
|
spin_unlock_bh(&port->fcoe_pending_queue.lock);
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* fcoe_dev_setup() - Setup the link change notification interface
|
|
*/
|
|
static void fcoe_dev_setup(void)
|
|
{
|
|
register_netdevice_notifier(&fcoe_notifier);
|
|
}
|
|
|
|
/**
|
|
* fcoe_dev_cleanup() - Cleanup the link change notification interface
|
|
*/
|
|
static void fcoe_dev_cleanup(void)
|
|
{
|
|
unregister_netdevice_notifier(&fcoe_notifier);
|
|
}
|
|
|
|
/**
|
|
* fcoe_device_notification() - Handler for net device events
|
|
* @notifier: The context of the notification
|
|
* @event: The type of event
|
|
* @ptr: The net device that the event was on
|
|
*
|
|
* This function is called by the Ethernet driver in case of link change event.
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_device_notification(struct notifier_block *notifier,
|
|
ulong event, void *ptr)
|
|
{
|
|
struct fc_lport *lport = NULL;
|
|
struct net_device *netdev = ptr;
|
|
struct fcoe_interface *fcoe;
|
|
struct fcoe_port *port;
|
|
struct fcoe_dev_stats *stats;
|
|
u32 link_possible = 1;
|
|
u32 mfs;
|
|
int rc = NOTIFY_OK;
|
|
|
|
list_for_each_entry(fcoe, &fcoe_hostlist, list) {
|
|
if (fcoe->netdev == netdev) {
|
|
lport = fcoe->ctlr.lp;
|
|
break;
|
|
}
|
|
}
|
|
if (!lport) {
|
|
rc = NOTIFY_DONE;
|
|
goto out;
|
|
}
|
|
|
|
switch (event) {
|
|
case NETDEV_DOWN:
|
|
case NETDEV_GOING_DOWN:
|
|
link_possible = 0;
|
|
break;
|
|
case NETDEV_UP:
|
|
case NETDEV_CHANGE:
|
|
break;
|
|
case NETDEV_CHANGEMTU:
|
|
if (netdev->features & NETIF_F_FCOE_MTU)
|
|
break;
|
|
mfs = netdev->mtu - (sizeof(struct fcoe_hdr) +
|
|
sizeof(struct fcoe_crc_eof));
|
|
if (mfs >= FC_MIN_MAX_FRAME)
|
|
fc_set_mfs(lport, mfs);
|
|
break;
|
|
case NETDEV_REGISTER:
|
|
break;
|
|
case NETDEV_UNREGISTER:
|
|
list_del(&fcoe->list);
|
|
port = lport_priv(fcoe->ctlr.lp);
|
|
fcoe_interface_cleanup(fcoe);
|
|
schedule_work(&port->destroy_work);
|
|
goto out;
|
|
break;
|
|
default:
|
|
FCOE_NETDEV_DBG(netdev, "Unknown event %ld "
|
|
"from netdev netlink\n", event);
|
|
}
|
|
if (link_possible && !fcoe_link_ok(lport))
|
|
fcoe_ctlr_link_up(&fcoe->ctlr);
|
|
else if (fcoe_ctlr_link_down(&fcoe->ctlr)) {
|
|
stats = fc_lport_get_stats(lport);
|
|
stats->LinkFailureCount++;
|
|
fcoe_clean_pending_queue(lport);
|
|
}
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* fcoe_if_to_netdev() - Parse a name buffer to get a net device
|
|
* @buffer: The name of the net device
|
|
*
|
|
* Returns: NULL or a ptr to net_device
|
|
*/
|
|
static struct net_device *fcoe_if_to_netdev(const char *buffer)
|
|
{
|
|
char *cp;
|
|
char ifname[IFNAMSIZ + 2];
|
|
|
|
if (buffer) {
|
|
strlcpy(ifname, buffer, IFNAMSIZ);
|
|
cp = ifname + strlen(ifname);
|
|
while (--cp >= ifname && *cp == '\n')
|
|
*cp = '\0';
|
|
return dev_get_by_name(&init_net, ifname);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* fcoe_disable() - Disables a FCoE interface
|
|
* @buffer: The name of the Ethernet interface to be disabled
|
|
* @kp: The associated kernel parameter
|
|
*
|
|
* Called from sysfs.
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_disable(const char *buffer, struct kernel_param *kp)
|
|
{
|
|
struct fcoe_interface *fcoe;
|
|
struct net_device *netdev;
|
|
int rc = 0;
|
|
|
|
mutex_lock(&fcoe_config_mutex);
|
|
#ifdef CONFIG_FCOE_MODULE
|
|
/*
|
|
* Make sure the module has been initialized, and is not about to be
|
|
* removed. Module paramter sysfs files are writable before the
|
|
* module_init function is called and after module_exit.
|
|
*/
|
|
if (THIS_MODULE->state != MODULE_STATE_LIVE) {
|
|
rc = -ENODEV;
|
|
goto out_nodev;
|
|
}
|
|
#endif
|
|
|
|
netdev = fcoe_if_to_netdev(buffer);
|
|
if (!netdev) {
|
|
rc = -ENODEV;
|
|
goto out_nodev;
|
|
}
|
|
|
|
rtnl_lock();
|
|
fcoe = fcoe_hostlist_lookup_port(netdev);
|
|
rtnl_unlock();
|
|
|
|
if (fcoe)
|
|
fc_fabric_logoff(fcoe->ctlr.lp);
|
|
else
|
|
rc = -ENODEV;
|
|
|
|
dev_put(netdev);
|
|
out_nodev:
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* fcoe_enable() - Enables a FCoE interface
|
|
* @buffer: The name of the Ethernet interface to be enabled
|
|
* @kp: The associated kernel parameter
|
|
*
|
|
* Called from sysfs.
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_enable(const char *buffer, struct kernel_param *kp)
|
|
{
|
|
struct fcoe_interface *fcoe;
|
|
struct net_device *netdev;
|
|
int rc = 0;
|
|
|
|
mutex_lock(&fcoe_config_mutex);
|
|
#ifdef CONFIG_FCOE_MODULE
|
|
/*
|
|
* Make sure the module has been initialized, and is not about to be
|
|
* removed. Module paramter sysfs files are writable before the
|
|
* module_init function is called and after module_exit.
|
|
*/
|
|
if (THIS_MODULE->state != MODULE_STATE_LIVE) {
|
|
rc = -ENODEV;
|
|
goto out_nodev;
|
|
}
|
|
#endif
|
|
|
|
netdev = fcoe_if_to_netdev(buffer);
|
|
if (!netdev) {
|
|
rc = -ENODEV;
|
|
goto out_nodev;
|
|
}
|
|
|
|
rtnl_lock();
|
|
fcoe = fcoe_hostlist_lookup_port(netdev);
|
|
rtnl_unlock();
|
|
|
|
if (fcoe)
|
|
rc = fc_fabric_login(fcoe->ctlr.lp);
|
|
else
|
|
rc = -ENODEV;
|
|
|
|
dev_put(netdev);
|
|
out_nodev:
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* fcoe_destroy() - Destroy a FCoE interface
|
|
* @buffer: The name of the Ethernet interface to be destroyed
|
|
* @kp: The associated kernel parameter
|
|
*
|
|
* Called from sysfs.
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_destroy(const char *buffer, struct kernel_param *kp)
|
|
{
|
|
struct fcoe_interface *fcoe;
|
|
struct net_device *netdev;
|
|
int rc = 0;
|
|
|
|
mutex_lock(&fcoe_config_mutex);
|
|
#ifdef CONFIG_FCOE_MODULE
|
|
/*
|
|
* Make sure the module has been initialized, and is not about to be
|
|
* removed. Module paramter sysfs files are writable before the
|
|
* module_init function is called and after module_exit.
|
|
*/
|
|
if (THIS_MODULE->state != MODULE_STATE_LIVE) {
|
|
rc = -ENODEV;
|
|
goto out_nodev;
|
|
}
|
|
#endif
|
|
|
|
netdev = fcoe_if_to_netdev(buffer);
|
|
if (!netdev) {
|
|
rc = -ENODEV;
|
|
goto out_nodev;
|
|
}
|
|
|
|
rtnl_lock();
|
|
fcoe = fcoe_hostlist_lookup_port(netdev);
|
|
if (!fcoe) {
|
|
rtnl_unlock();
|
|
rc = -ENODEV;
|
|
goto out_putdev;
|
|
}
|
|
list_del(&fcoe->list);
|
|
fcoe_interface_cleanup(fcoe);
|
|
rtnl_unlock();
|
|
fcoe_if_destroy(fcoe->ctlr.lp);
|
|
module_put(THIS_MODULE);
|
|
|
|
out_putdev:
|
|
dev_put(netdev);
|
|
out_nodev:
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* fcoe_destroy_work() - Destroy a FCoE port in a deferred work context
|
|
* @work: Handle to the FCoE port to be destroyed
|
|
*/
|
|
static void fcoe_destroy_work(struct work_struct *work)
|
|
{
|
|
struct fcoe_port *port;
|
|
|
|
port = container_of(work, struct fcoe_port, destroy_work);
|
|
mutex_lock(&fcoe_config_mutex);
|
|
fcoe_if_destroy(port->lport);
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
}
|
|
|
|
/**
|
|
* fcoe_create() - Create a fcoe interface
|
|
* @buffer: The name of the Ethernet interface to create on
|
|
* @kp: The associated kernel param
|
|
*
|
|
* Called from sysfs.
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_create(const char *buffer, struct kernel_param *kp)
|
|
{
|
|
int rc;
|
|
struct fcoe_interface *fcoe;
|
|
struct fc_lport *lport;
|
|
struct net_device *netdev;
|
|
|
|
mutex_lock(&fcoe_config_mutex);
|
|
#ifdef CONFIG_FCOE_MODULE
|
|
/*
|
|
* Make sure the module has been initialized, and is not about to be
|
|
* removed. Module paramter sysfs files are writable before the
|
|
* module_init function is called and after module_exit.
|
|
*/
|
|
if (THIS_MODULE->state != MODULE_STATE_LIVE) {
|
|
rc = -ENODEV;
|
|
goto out_nodev;
|
|
}
|
|
#endif
|
|
|
|
if (!try_module_get(THIS_MODULE)) {
|
|
rc = -EINVAL;
|
|
goto out_nomod;
|
|
}
|
|
|
|
rtnl_lock();
|
|
netdev = fcoe_if_to_netdev(buffer);
|
|
if (!netdev) {
|
|
rc = -ENODEV;
|
|
goto out_nodev;
|
|
}
|
|
|
|
/* look for existing lport */
|
|
if (fcoe_hostlist_lookup(netdev)) {
|
|
rc = -EEXIST;
|
|
goto out_putdev;
|
|
}
|
|
|
|
fcoe = fcoe_interface_create(netdev);
|
|
if (!fcoe) {
|
|
rc = -ENOMEM;
|
|
goto out_putdev;
|
|
}
|
|
|
|
lport = fcoe_if_create(fcoe, &netdev->dev, 0);
|
|
if (IS_ERR(lport)) {
|
|
printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
|
|
netdev->name);
|
|
rc = -EIO;
|
|
fcoe_interface_cleanup(fcoe);
|
|
goto out_free;
|
|
}
|
|
|
|
/* Make this the "master" N_Port */
|
|
fcoe->ctlr.lp = lport;
|
|
|
|
/* add to lports list */
|
|
fcoe_hostlist_add(lport);
|
|
|
|
/* start FIP Discovery and FLOGI */
|
|
lport->boot_time = jiffies;
|
|
fc_fabric_login(lport);
|
|
if (!fcoe_link_ok(lport))
|
|
fcoe_ctlr_link_up(&fcoe->ctlr);
|
|
|
|
/*
|
|
* Release from init in fcoe_interface_create(), on success lport
|
|
* should be holding a reference taken in fcoe_if_create().
|
|
*/
|
|
fcoe_interface_put(fcoe);
|
|
dev_put(netdev);
|
|
rtnl_unlock();
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
|
|
return 0;
|
|
out_free:
|
|
fcoe_interface_put(fcoe);
|
|
out_putdev:
|
|
dev_put(netdev);
|
|
out_nodev:
|
|
rtnl_unlock();
|
|
module_put(THIS_MODULE);
|
|
out_nomod:
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* fcoe_link_ok() - Check if the link is OK for a local port
|
|
* @lport: The local port to check link on
|
|
*
|
|
* Any permanently-disqualifying conditions have been previously checked.
|
|
* This also updates the speed setting, which may change with link for 100/1000.
|
|
*
|
|
* This function should probably be checking for PAUSE support at some point
|
|
* in the future. Currently Per-priority-pause is not determinable using
|
|
* ethtool, so we shouldn't be restrictive until that problem is resolved.
|
|
*
|
|
* Returns: 0 if link is OK for use by FCoE.
|
|
*
|
|
*/
|
|
int fcoe_link_ok(struct fc_lport *lport)
|
|
{
|
|
struct fcoe_port *port = lport_priv(lport);
|
|
struct net_device *netdev = port->fcoe->netdev;
|
|
struct ethtool_cmd ecmd = { ETHTOOL_GSET };
|
|
|
|
if ((netdev->flags & IFF_UP) && netif_carrier_ok(netdev) &&
|
|
(!dev_ethtool_get_settings(netdev, &ecmd))) {
|
|
lport->link_supported_speeds &=
|
|
~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
|
|
if (ecmd.supported & (SUPPORTED_1000baseT_Half |
|
|
SUPPORTED_1000baseT_Full))
|
|
lport->link_supported_speeds |= FC_PORTSPEED_1GBIT;
|
|
if (ecmd.supported & SUPPORTED_10000baseT_Full)
|
|
lport->link_supported_speeds |=
|
|
FC_PORTSPEED_10GBIT;
|
|
if (ecmd.speed == SPEED_1000)
|
|
lport->link_speed = FC_PORTSPEED_1GBIT;
|
|
if (ecmd.speed == SPEED_10000)
|
|
lport->link_speed = FC_PORTSPEED_10GBIT;
|
|
|
|
return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* fcoe_percpu_clean() - Clear all pending skbs for an local port
|
|
* @lport: The local port whose skbs are to be cleared
|
|
*
|
|
* Must be called with fcoe_create_mutex held to single-thread completion.
|
|
*
|
|
* This flushes the pending skbs by adding a new skb to each queue and
|
|
* waiting until they are all freed. This assures us that not only are
|
|
* there no packets that will be handled by the lport, but also that any
|
|
* threads already handling packet have returned.
|
|
*/
|
|
void fcoe_percpu_clean(struct fc_lport *lport)
|
|
{
|
|
struct fcoe_percpu_s *pp;
|
|
struct fcoe_rcv_info *fr;
|
|
struct sk_buff_head *list;
|
|
struct sk_buff *skb, *next;
|
|
struct sk_buff *head;
|
|
unsigned int cpu;
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
pp = &per_cpu(fcoe_percpu, cpu);
|
|
spin_lock_bh(&pp->fcoe_rx_list.lock);
|
|
list = &pp->fcoe_rx_list;
|
|
head = list->next;
|
|
for (skb = head; skb != (struct sk_buff *)list;
|
|
skb = next) {
|
|
next = skb->next;
|
|
fr = fcoe_dev_from_skb(skb);
|
|
if (fr->fr_dev == lport) {
|
|
__skb_unlink(skb, list);
|
|
kfree_skb(skb);
|
|
}
|
|
}
|
|
|
|
if (!pp->thread || !cpu_online(cpu)) {
|
|
spin_unlock_bh(&pp->fcoe_rx_list.lock);
|
|
continue;
|
|
}
|
|
|
|
skb = dev_alloc_skb(0);
|
|
if (!skb) {
|
|
spin_unlock_bh(&pp->fcoe_rx_list.lock);
|
|
continue;
|
|
}
|
|
skb->destructor = fcoe_percpu_flush_done;
|
|
|
|
__skb_queue_tail(&pp->fcoe_rx_list, skb);
|
|
if (pp->fcoe_rx_list.qlen == 1)
|
|
wake_up_process(pp->thread);
|
|
spin_unlock_bh(&pp->fcoe_rx_list.lock);
|
|
|
|
wait_for_completion(&fcoe_flush_completion);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* fcoe_clean_pending_queue() - Dequeue a skb and free it
|
|
* @lport: The local port to dequeue a skb on
|
|
*/
|
|
void fcoe_clean_pending_queue(struct fc_lport *lport)
|
|
{
|
|
struct fcoe_port *port = lport_priv(lport);
|
|
struct sk_buff *skb;
|
|
|
|
spin_lock_bh(&port->fcoe_pending_queue.lock);
|
|
while ((skb = __skb_dequeue(&port->fcoe_pending_queue)) != NULL) {
|
|
spin_unlock_bh(&port->fcoe_pending_queue.lock);
|
|
kfree_skb(skb);
|
|
spin_lock_bh(&port->fcoe_pending_queue.lock);
|
|
}
|
|
spin_unlock_bh(&port->fcoe_pending_queue.lock);
|
|
}
|
|
|
|
/**
|
|
* fcoe_reset() - Reset a local port
|
|
* @shost: The SCSI host associated with the local port to be reset
|
|
*
|
|
* Returns: Always 0 (return value required by FC transport template)
|
|
*/
|
|
int fcoe_reset(struct Scsi_Host *shost)
|
|
{
|
|
struct fc_lport *lport = shost_priv(shost);
|
|
fc_lport_reset(lport);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_hostlist_lookup_port() - Find the FCoE interface associated with a net device
|
|
* @netdev: The net device used as a key
|
|
*
|
|
* Locking: Must be called with the RNL mutex held.
|
|
*
|
|
* Returns: NULL or the FCoE interface
|
|
*/
|
|
static struct fcoe_interface *
|
|
fcoe_hostlist_lookup_port(const struct net_device *netdev)
|
|
{
|
|
struct fcoe_interface *fcoe;
|
|
|
|
list_for_each_entry(fcoe, &fcoe_hostlist, list) {
|
|
if (fcoe->netdev == netdev)
|
|
return fcoe;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* fcoe_hostlist_lookup() - Find the local port associated with a
|
|
* given net device
|
|
* @netdev: The netdevice used as a key
|
|
*
|
|
* Locking: Must be called with the RTNL mutex held
|
|
*
|
|
* Returns: NULL or the local port
|
|
*/
|
|
static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev)
|
|
{
|
|
struct fcoe_interface *fcoe;
|
|
|
|
fcoe = fcoe_hostlist_lookup_port(netdev);
|
|
return (fcoe) ? fcoe->ctlr.lp : NULL;
|
|
}
|
|
|
|
/**
|
|
* fcoe_hostlist_add() - Add the FCoE interface identified by a local
|
|
* port to the hostlist
|
|
* @lport: The local port that identifies the FCoE interface to be added
|
|
*
|
|
* Locking: must be called with the RTNL mutex held
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_hostlist_add(const struct fc_lport *lport)
|
|
{
|
|
struct fcoe_interface *fcoe;
|
|
struct fcoe_port *port;
|
|
|
|
fcoe = fcoe_hostlist_lookup_port(fcoe_netdev(lport));
|
|
if (!fcoe) {
|
|
port = lport_priv(lport);
|
|
fcoe = port->fcoe;
|
|
list_add_tail(&fcoe->list, &fcoe_hostlist);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_init() - Initialize fcoe.ko
|
|
*
|
|
* Returns: 0 on success, or a negative value on failure
|
|
*/
|
|
static int __init fcoe_init(void)
|
|
{
|
|
struct fcoe_percpu_s *p;
|
|
unsigned int cpu;
|
|
int rc = 0;
|
|
|
|
mutex_lock(&fcoe_config_mutex);
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
p = &per_cpu(fcoe_percpu, cpu);
|
|
skb_queue_head_init(&p->fcoe_rx_list);
|
|
}
|
|
|
|
for_each_online_cpu(cpu)
|
|
fcoe_percpu_thread_create(cpu);
|
|
|
|
/* Initialize per CPU interrupt thread */
|
|
rc = register_hotcpu_notifier(&fcoe_cpu_notifier);
|
|
if (rc)
|
|
goto out_free;
|
|
|
|
/* Setup link change notification */
|
|
fcoe_dev_setup();
|
|
|
|
rc = fcoe_if_init();
|
|
if (rc)
|
|
goto out_free;
|
|
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
return 0;
|
|
|
|
out_free:
|
|
for_each_online_cpu(cpu) {
|
|
fcoe_percpu_thread_destroy(cpu);
|
|
}
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
return rc;
|
|
}
|
|
module_init(fcoe_init);
|
|
|
|
/**
|
|
* fcoe_exit() - Clean up fcoe.ko
|
|
*
|
|
* Returns: 0 on success or a negative value on failure
|
|
*/
|
|
static void __exit fcoe_exit(void)
|
|
{
|
|
struct fcoe_interface *fcoe, *tmp;
|
|
struct fcoe_port *port;
|
|
unsigned int cpu;
|
|
|
|
mutex_lock(&fcoe_config_mutex);
|
|
|
|
fcoe_dev_cleanup();
|
|
|
|
/* releases the associated fcoe hosts */
|
|
rtnl_lock();
|
|
list_for_each_entry_safe(fcoe, tmp, &fcoe_hostlist, list) {
|
|
list_del(&fcoe->list);
|
|
port = lport_priv(fcoe->ctlr.lp);
|
|
fcoe_interface_cleanup(fcoe);
|
|
schedule_work(&port->destroy_work);
|
|
}
|
|
rtnl_unlock();
|
|
|
|
unregister_hotcpu_notifier(&fcoe_cpu_notifier);
|
|
|
|
for_each_online_cpu(cpu)
|
|
fcoe_percpu_thread_destroy(cpu);
|
|
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
|
|
/* flush any asyncronous interface destroys,
|
|
* this should happen after the netdev notifier is unregistered */
|
|
flush_scheduled_work();
|
|
/* That will flush out all the N_Ports on the hostlist, but now we
|
|
* may have NPIV VN_Ports scheduled for destruction */
|
|
flush_scheduled_work();
|
|
|
|
/* detach from scsi transport
|
|
* must happen after all destroys are done, therefor after the flush */
|
|
fcoe_if_exit();
|
|
}
|
|
module_exit(fcoe_exit);
|
|
|
|
/**
|
|
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
|
|
* @seq: active sequence in the FLOGI or FDISC exchange
|
|
* @fp: response frame, or error encoded in a pointer (timeout)
|
|
* @arg: pointer the the fcoe_ctlr structure
|
|
*
|
|
* This handles MAC address managment for FCoE, then passes control on to
|
|
* the libfc FLOGI response handler.
|
|
*/
|
|
static void fcoe_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
|
|
{
|
|
struct fcoe_ctlr *fip = arg;
|
|
struct fc_exch *exch = fc_seq_exch(seq);
|
|
struct fc_lport *lport = exch->lp;
|
|
u8 *mac;
|
|
|
|
if (IS_ERR(fp))
|
|
goto done;
|
|
|
|
mac = fr_cb(fp)->granted_mac;
|
|
if (is_zero_ether_addr(mac)) {
|
|
/* pre-FIP */
|
|
if (fcoe_ctlr_recv_flogi(fip, lport, fp)) {
|
|
fc_frame_free(fp);
|
|
return;
|
|
}
|
|
}
|
|
fcoe_update_src_mac(lport, mac);
|
|
done:
|
|
fc_lport_flogi_resp(seq, fp, lport);
|
|
}
|
|
|
|
/**
|
|
* fcoe_logo_resp() - FCoE specific LOGO response handler
|
|
* @seq: active sequence in the LOGO exchange
|
|
* @fp: response frame, or error encoded in a pointer (timeout)
|
|
* @arg: pointer the the fcoe_ctlr structure
|
|
*
|
|
* This handles MAC address managment for FCoE, then passes control on to
|
|
* the libfc LOGO response handler.
|
|
*/
|
|
static void fcoe_logo_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
|
|
{
|
|
struct fc_lport *lport = arg;
|
|
static u8 zero_mac[ETH_ALEN] = { 0 };
|
|
|
|
if (!IS_ERR(fp))
|
|
fcoe_update_src_mac(lport, zero_mac);
|
|
fc_lport_logo_resp(seq, fp, lport);
|
|
}
|
|
|
|
/**
|
|
* fcoe_elsct_send - FCoE specific ELS handler
|
|
*
|
|
* This does special case handling of FIP encapsualted ELS exchanges for FCoE,
|
|
* using FCoE specific response handlers and passing the FIP controller as
|
|
* the argument (the lport is still available from the exchange).
|
|
*
|
|
* Most of the work here is just handed off to the libfc routine.
|
|
*/
|
|
static struct fc_seq *fcoe_elsct_send(struct fc_lport *lport, u32 did,
|
|
struct fc_frame *fp, unsigned int op,
|
|
void (*resp)(struct fc_seq *,
|
|
struct fc_frame *,
|
|
void *),
|
|
void *arg, u32 timeout)
|
|
{
|
|
struct fcoe_port *port = lport_priv(lport);
|
|
struct fcoe_interface *fcoe = port->fcoe;
|
|
struct fcoe_ctlr *fip = &fcoe->ctlr;
|
|
struct fc_frame_header *fh = fc_frame_header_get(fp);
|
|
|
|
switch (op) {
|
|
case ELS_FLOGI:
|
|
case ELS_FDISC:
|
|
return fc_elsct_send(lport, did, fp, op, fcoe_flogi_resp,
|
|
fip, timeout);
|
|
case ELS_LOGO:
|
|
/* only hook onto fabric logouts, not port logouts */
|
|
if (ntoh24(fh->fh_d_id) != FC_FID_FLOGI)
|
|
break;
|
|
return fc_elsct_send(lport, did, fp, op, fcoe_logo_resp,
|
|
lport, timeout);
|
|
}
|
|
return fc_elsct_send(lport, did, fp, op, resp, arg, timeout);
|
|
}
|
|
|
|
/**
|
|
* fcoe_vport_create() - create an fc_host/scsi_host for a vport
|
|
* @vport: fc_vport object to create a new fc_host for
|
|
* @disabled: start the new fc_host in a disabled state by default?
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_vport_create(struct fc_vport *vport, bool disabled)
|
|
{
|
|
struct Scsi_Host *shost = vport_to_shost(vport);
|
|
struct fc_lport *n_port = shost_priv(shost);
|
|
struct fcoe_port *port = lport_priv(n_port);
|
|
struct fcoe_interface *fcoe = port->fcoe;
|
|
struct net_device *netdev = fcoe->netdev;
|
|
struct fc_lport *vn_port;
|
|
|
|
mutex_lock(&fcoe_config_mutex);
|
|
vn_port = fcoe_if_create(fcoe, &vport->dev, 1);
|
|
mutex_unlock(&fcoe_config_mutex);
|
|
|
|
if (IS_ERR(vn_port)) {
|
|
printk(KERN_ERR "fcoe: fcoe_vport_create(%s) failed\n",
|
|
netdev->name);
|
|
return -EIO;
|
|
}
|
|
|
|
if (disabled) {
|
|
fc_vport_set_state(vport, FC_VPORT_DISABLED);
|
|
} else {
|
|
vn_port->boot_time = jiffies;
|
|
fc_fabric_login(vn_port);
|
|
fc_vport_setlink(vn_port);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_vport_destroy() - destroy the fc_host/scsi_host for a vport
|
|
* @vport: fc_vport object that is being destroyed
|
|
*
|
|
* Returns: 0 for success
|
|
*/
|
|
static int fcoe_vport_destroy(struct fc_vport *vport)
|
|
{
|
|
struct Scsi_Host *shost = vport_to_shost(vport);
|
|
struct fc_lport *n_port = shost_priv(shost);
|
|
struct fc_lport *vn_port = vport->dd_data;
|
|
struct fcoe_port *port = lport_priv(vn_port);
|
|
|
|
mutex_lock(&n_port->lp_mutex);
|
|
list_del(&vn_port->list);
|
|
mutex_unlock(&n_port->lp_mutex);
|
|
schedule_work(&port->destroy_work);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_vport_disable() - change vport state
|
|
* @vport: vport to bring online/offline
|
|
* @disable: should the vport be disabled?
|
|
*/
|
|
static int fcoe_vport_disable(struct fc_vport *vport, bool disable)
|
|
{
|
|
struct fc_lport *lport = vport->dd_data;
|
|
|
|
if (disable) {
|
|
fc_vport_set_state(vport, FC_VPORT_DISABLED);
|
|
fc_fabric_logoff(lport);
|
|
} else {
|
|
lport->boot_time = jiffies;
|
|
fc_fabric_login(lport);
|
|
fc_vport_setlink(lport);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fcoe_vport_set_symbolic_name() - append vport string to symbolic name
|
|
* @vport: fc_vport with a new symbolic name string
|
|
*
|
|
* After generating a new symbolic name string, a new RSPN_ID request is
|
|
* sent to the name server. There is no response handler, so if it fails
|
|
* for some reason it will not be retried.
|
|
*/
|
|
static void fcoe_set_vport_symbolic_name(struct fc_vport *vport)
|
|
{
|
|
struct fc_lport *lport = vport->dd_data;
|
|
struct fc_frame *fp;
|
|
size_t len;
|
|
|
|
snprintf(fc_host_symbolic_name(lport->host), FC_SYMBOLIC_NAME_SIZE,
|
|
"%s v%s over %s : %s", FCOE_NAME, FCOE_VERSION,
|
|
fcoe_netdev(lport)->name, vport->symbolic_name);
|
|
|
|
if (lport->state != LPORT_ST_READY)
|
|
return;
|
|
|
|
len = strnlen(fc_host_symbolic_name(lport->host), 255);
|
|
fp = fc_frame_alloc(lport,
|
|
sizeof(struct fc_ct_hdr) +
|
|
sizeof(struct fc_ns_rspn) + len);
|
|
if (!fp)
|
|
return;
|
|
lport->tt.elsct_send(lport, FC_FID_DIR_SERV, fp, FC_NS_RSPN_ID,
|
|
NULL, NULL, 3 * lport->r_a_tov);
|
|
}
|
|
|
|
/**
|
|
* fcoe_get_lesb() - Fill the FCoE Link Error Status Block
|
|
* @lport: the local port
|
|
* @fc_lesb: the link error status block
|
|
*/
|
|
static void fcoe_get_lesb(struct fc_lport *lport,
|
|
struct fc_els_lesb *fc_lesb)
|
|
{
|
|
unsigned int cpu;
|
|
u32 lfc, vlfc, mdac;
|
|
struct fcoe_dev_stats *devst;
|
|
struct fcoe_fc_els_lesb *lesb;
|
|
struct net_device *netdev = fcoe_netdev(lport);
|
|
|
|
lfc = 0;
|
|
vlfc = 0;
|
|
mdac = 0;
|
|
lesb = (struct fcoe_fc_els_lesb *)fc_lesb;
|
|
memset(lesb, 0, sizeof(*lesb));
|
|
for_each_possible_cpu(cpu) {
|
|
devst = per_cpu_ptr(lport->dev_stats, cpu);
|
|
lfc += devst->LinkFailureCount;
|
|
vlfc += devst->VLinkFailureCount;
|
|
mdac += devst->MissDiscAdvCount;
|
|
}
|
|
lesb->lesb_link_fail = htonl(lfc);
|
|
lesb->lesb_vlink_fail = htonl(vlfc);
|
|
lesb->lesb_miss_fka = htonl(mdac);
|
|
lesb->lesb_fcs_error = htonl(dev_get_stats(netdev)->rx_crc_errors);
|
|
}
|