linux/drivers/nvmem/stm32-bsec-optee-ta.c
Patrick Delaunay 6a0bc3522e nvmem: stm32: add OP-TEE support for STM32MP13x
For boot with OP-TEE on STM32MP13, the communication with the secure
world no more use STMicroelectronics SMC but communication with the
STM32MP BSEC TA, for data access (read/write) or lock operation:
- all the request are sent to OP-TEE trusted application,
- for upper OTP with ECC protection and with word programming only
  each OTP are permanently locked when programmed to avoid ECC error
  on the second write operation

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-18-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-06 19:06:59 +01:00

299 lines
7.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
*
* Copyright (C) 2022, STMicroelectronics - All Rights Reserved
*/
#include <linux/tee_drv.h>
#include "stm32-bsec-optee-ta.h"
/*
* Read OTP memory
*
* [in] value[0].a OTP start offset in byte
* [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
* [out] memref[1].buffer Output buffer to store read values
* [out] memref[1].size Size of OTP to be read
*
* Return codes:
* TEE_SUCCESS - Invoke command success
* TEE_ERROR_BAD_PARAMETERS - Incorrect input param
* TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
*/
#define PTA_BSEC_READ_MEM 0x0
/*
* Write OTP memory
*
* [in] value[0].a OTP start offset in byte
* [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
* [in] memref[1].buffer Input buffer to read values
* [in] memref[1].size Size of OTP to be written
*
* Return codes:
* TEE_SUCCESS - Invoke command success
* TEE_ERROR_BAD_PARAMETERS - Incorrect input param
* TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
*/
#define PTA_BSEC_WRITE_MEM 0x1
/* value of PTA_BSEC access type = value[in] b */
#define SHADOW_ACCESS 0
#define FUSE_ACCESS 1
#define LOCK_ACCESS 2
/* Bitfield definition for LOCK status */
#define LOCK_PERM BIT(30)
/* OP-TEE STM32MP BSEC TA UUID */
static const uuid_t stm32mp_bsec_ta_uuid =
UUID_INIT(0x94cf71ad, 0x80e6, 0x40b5,
0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03);
/*
* Check whether this driver supports the BSEC TA in the TEE instance
* represented by the params (ver/data) to this function.
*/
static int stm32_bsec_optee_ta_match(struct tee_ioctl_version_data *ver,
const void *data)
{
/* Currently this driver only supports GP compliant, OP-TEE based TA */
if ((ver->impl_id == TEE_IMPL_ID_OPTEE) &&
(ver->gen_caps & TEE_GEN_CAP_GP))
return 1;
else
return 0;
}
/* Open a session to OP-TEE for STM32MP BSEC TA */
static int stm32_bsec_ta_open_session(struct tee_context *ctx, u32 *id)
{
struct tee_ioctl_open_session_arg sess_arg;
int rc;
memset(&sess_arg, 0, sizeof(sess_arg));
export_uuid(sess_arg.uuid, &stm32mp_bsec_ta_uuid);
sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
sess_arg.num_params = 0;
rc = tee_client_open_session(ctx, &sess_arg, NULL);
if ((rc < 0) || (sess_arg.ret != 0)) {
pr_err("%s: tee_client_open_session failed err:%#x, ret:%#x\n",
__func__, sess_arg.ret, rc);
if (!rc)
rc = -EINVAL;
} else {
*id = sess_arg.session;
}
return rc;
}
/* close a session to OP-TEE for STM32MP BSEC TA */
static void stm32_bsec_ta_close_session(void *ctx, u32 id)
{
tee_client_close_session(ctx, id);
}
/* stm32_bsec_optee_ta_open() - initialize the STM32MP BSEC TA */
int stm32_bsec_optee_ta_open(struct tee_context **ctx)
{
struct tee_context *tee_ctx;
u32 session_id;
int rc;
/* Open context with TEE driver */
tee_ctx = tee_client_open_context(NULL, stm32_bsec_optee_ta_match, NULL, NULL);
if (IS_ERR(tee_ctx)) {
rc = PTR_ERR(tee_ctx);
if (rc == -ENOENT)
return -EPROBE_DEFER;
pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc);
return rc;
}
/* Check STM32MP BSEC TA presence */
rc = stm32_bsec_ta_open_session(tee_ctx, &session_id);
if (rc) {
tee_client_close_context(tee_ctx);
return rc;
}
stm32_bsec_ta_close_session(tee_ctx, session_id);
*ctx = tee_ctx;
return 0;
}
/* stm32_bsec_optee_ta_open() - release the PTA STM32MP BSEC TA */
void stm32_bsec_optee_ta_close(void *ctx)
{
tee_client_close_context(ctx);
}
/* stm32_bsec_optee_ta_read() - nvmem read access using PTA client driver */
int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
void *buf, size_t bytes)
{
struct tee_shm *shm;
struct tee_ioctl_invoke_arg arg;
struct tee_param param[2];
u8 *shm_buf;
u32 start, num_bytes;
int ret;
u32 session_id;
ret = stm32_bsec_ta_open_session(ctx, &session_id);
if (ret)
return ret;
memset(&arg, 0, sizeof(arg));
memset(&param, 0, sizeof(param));
arg.func = PTA_BSEC_READ_MEM;
arg.session = session_id;
arg.num_params = 2;
/* align access on 32bits */
start = ALIGN_DOWN(offset, 4);
num_bytes = round_up(offset + bytes - start, 4);
param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
param[0].u.value.a = start;
param[0].u.value.b = SHADOW_ACCESS;
shm = tee_shm_alloc_kernel_buf(ctx, num_bytes);
if (IS_ERR(shm)) {
ret = PTR_ERR(shm);
goto out_tee_session;
}
param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
param[1].u.memref.shm = shm;
param[1].u.memref.size = num_bytes;
ret = tee_client_invoke_func(ctx, &arg, param);
if (ret < 0 || arg.ret != 0) {
pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n",
arg.ret, ret);
if (!ret)
ret = -EIO;
}
if (!ret) {
shm_buf = tee_shm_get_va(shm, 0);
if (IS_ERR(shm_buf)) {
ret = PTR_ERR(shm_buf);
pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
} else {
/* read data from 32 bits aligned buffer */
memcpy(buf, &shm_buf[offset % 4], bytes);
}
}
tee_shm_free(shm);
out_tee_session:
stm32_bsec_ta_close_session(ctx, session_id);
return ret;
}
/* stm32_bsec_optee_ta_write() - nvmem write access using PTA client driver */
int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
unsigned int offset, void *buf, size_t bytes)
{ struct tee_shm *shm;
struct tee_ioctl_invoke_arg arg;
struct tee_param param[2];
u8 *shm_buf;
int ret;
u32 session_id;
ret = stm32_bsec_ta_open_session(ctx, &session_id);
if (ret)
return ret;
/* Allow only writing complete 32-bits aligned words */
if ((bytes % 4) || (offset % 4))
return -EINVAL;
memset(&arg, 0, sizeof(arg));
memset(&param, 0, sizeof(param));
arg.func = PTA_BSEC_WRITE_MEM;
arg.session = session_id;
arg.num_params = 2;
param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
param[0].u.value.a = offset;
param[0].u.value.b = FUSE_ACCESS;
shm = tee_shm_alloc_kernel_buf(ctx, bytes);
if (IS_ERR(shm)) {
ret = PTR_ERR(shm);
goto out_tee_session;
}
param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
param[1].u.memref.shm = shm;
param[1].u.memref.size = bytes;
shm_buf = tee_shm_get_va(shm, 0);
if (IS_ERR(shm_buf)) {
ret = PTR_ERR(shm_buf);
pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
tee_shm_free(shm);
goto out_tee_session;
}
memcpy(shm_buf, buf, bytes);
ret = tee_client_invoke_func(ctx, &arg, param);
if (ret < 0 || arg.ret != 0) {
pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
if (!ret)
ret = -EIO;
}
pr_debug("Write OTPs %d to %zu, ret=%d\n", offset / 4, (offset + bytes) / 4, ret);
/* Lock the upper OTPs with ECC protection, word programming only */
if (!ret && ((offset + bytes) >= (lower * 4))) {
u32 start, nb_lock;
u32 *lock = (u32 *)shm_buf;
int i;
/*
* don't lock the lower OTPs, no ECC protection and incremental
* bit programming, a second write is allowed
*/
start = max_t(u32, offset, lower * 4);
nb_lock = (offset + bytes - start) / 4;
param[0].u.value.a = start;
param[0].u.value.b = LOCK_ACCESS;
param[1].u.memref.size = nb_lock * 4;
for (i = 0; i < nb_lock; i++)
lock[i] = LOCK_PERM;
ret = tee_client_invoke_func(ctx, &arg, param);
if (ret < 0 || arg.ret != 0) {
pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
if (!ret)
ret = -EIO;
}
pr_debug("Lock upper OTPs %d to %d, ret=%d\n",
start / 4, start / 4 + nb_lock, ret);
}
tee_shm_free(shm);
out_tee_session:
stm32_bsec_ta_close_session(ctx, session_id);
return ret;
}