linux/drivers/clk/bcm
Maxime Ripard 8ca011ef4a
clk: bcm-2835: Remove rounding up the dividers
The driver, once it found a divider, tries to round it up by increasing
the least significant bit of the fractional part by one when the
round_up argument is set and there's a remainder.

However, since it increases the divider it will actually reduce the
clock rate below what we were asking for, leading to issues with
clk_set_min_rate() that will complain that our rounded clock rate is
below the minimum of the rate.

Since the dividers are fairly precise already, let's remove that part so
that we can have clk_set_min_rate() working.

This is effectively a revert of 9c95b32ca0 ("clk: bcm2835: add a round
up ability to the clock divisor").

Fixes: 9c95b32ca0 ("clk: bcm2835: add a round up ability to the clock divisor")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
2021-10-25 15:33:39 +02:00
..
clk-bcm63xx-gate.c clk: bcm63xx-gate: switch to dt-bindings definitions 2020-06-19 17:03:24 -07:00
clk-bcm63xx.c clk: bcm: Add BCM63138 clock support 2015-11-20 15:46:27 -08:00
clk-bcm281xx.c clk: bcm281xx: move compatible string definitions 2014-04-30 11:51:39 -07:00
clk-bcm2711-dvp.c clk: bcm: dvp: Add MODULE_DEVICE_TABLE() 2020-12-19 11:48:29 -08:00
clk-bcm2835-aux.c clk: bcm2835: use devm_platform_ioremap_resource() to simplify code 2019-10-16 16:16:50 -07:00
clk-bcm2835.c clk: bcm-2835: Remove rounding up the dividers 2021-10-25 15:33:39 +02:00
clk-bcm21664.c clk: bcm21664: use common clock framework 2014-04-30 11:51:44 -07:00
clk-bcm53573-ilp.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
clk-cygnus.c clk: iproc: Allow iproc pll to runtime calculate vco parameters 2017-12-28 14:53:33 -08:00
clk-hr2.c clk: bcm: Add Broadcom Hurricane 2 clock support 2017-10-12 11:31:46 -07:00
clk-iproc-armpll.c clk: bcm: iproc: Migrate to clk_hw based registration and OF APIs 2016-06-30 12:26:45 -07:00
clk-iproc-asiu.c clk: iproc: round clock rate to the closest 2020-07-24 01:54:18 -07:00
clk-iproc-pll.c clk: bcm: clk-iproc-pll: Demote kernel-doc abuse 2021-02-11 11:56:06 -08:00
clk-iproc.h clk: iproc: Allow iproc pll to runtime calculate vco parameters 2017-12-28 14:53:33 -08:00
clk-kona-setup.c clk: Convert to using %pOFn instead of device_node.name 2018-08-30 09:50:20 -07:00
clk-kona.c clk: Remove io.h from clk-provider.h 2019-05-15 13:21:37 -07:00
clk-kona.h clk: bcm: kona: Migrate to clk_hw based registration and OF APIs 2016-08-24 16:06:18 -07:00
clk-ns2.c clk: ns2: Correct SDIO bits 2017-04-19 09:50:39 -07:00
clk-nsp.c clk: iproc: Split off dig_filter 2015-10-21 17:02:57 -07:00
clk-raspberrypi.c clk: bcm: rpi: Release firmware handle on unbind 2021-03-22 17:59:51 +01:00
clk-sr.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459 2019-06-19 17:09:09 +02:00
Kconfig clk: bcm: dvp: Select the reset framework 2020-09-10 00:53:38 -07:00
Makefile clk: bcm: Add BCM2711 DVP driver 2020-06-19 17:13:53 -07:00