linux/arch/arm/mach-pxa/colibri-pxa270-income.c
Marek Vasut 403d29713e [ARM] pxa/income: Add Income SBC support
This is support for custom design based on Toradex Colibri PXA270 CPU card.
Initial patch was by Pavel Revak.

[daniel - rebased the code to follow the module/board split]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Pavel Revak <palo@bielyvlk.sk>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:34 +08:00

273 lines
6.5 KiB
C

/*
* linux/arch/arm/mach-pxa/income.c
*
* Support for Income s.r.o. SH-Dmaster PXA270 SBC
*
* Copyright (C) 2010
* Marek Vasut <marek.vasut@gmail.com>
* Pavel Revak <palo@bielyvlk.sk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/sysdev.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include "devices.h"
#include "generic.h"
#define GPIO114_INCOME_ETH_IRQ (114)
#define GPIO0_INCOME_SD_DETECT (0)
#define GPIO0_INCOME_SD_RO (1)
#define GPIO54_INCOME_LED_A (54)
#define GPIO55_INCOME_LED_B (55)
#define GPIO113_INCOME_TS_IRQ (113)
/******************************************************************************
* Pin configuration
******************************************************************************/
static mfp_cfg_t income_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO0_GPIO, /* SD detect */
GPIO1_GPIO, /* SD read-only */
/* FFUART */
GPIO39_FFUART_TXD,
GPIO34_FFUART_RXD,
/* BFUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* UHC */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
/* LCD */
GPIOxx_LCD_TFT_16BPP,
/* PWM */
GPIO16_PWM0_OUT,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* LED */
GPIO54_GPIO, /* LED A */
GPIO55_GPIO, /* LED B */
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data income_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = -1,
.gpio_card_detect = GPIO0_INCOME_SD_DETECT,
.gpio_card_ro = GPIO0_INCOME_SD_RO,
.detect_delay_ms = 200,
};
static void __init income_mmc_init(void)
{
pxa_set_mci_info(&income_mci_platform_data);
}
#else
static inline void income_mmc_init(void) {}
#endif
/******************************************************************************
* USB Host
******************************************************************************/
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static struct pxaohci_platform_data income_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
static void __init income_uhc_init(void)
{
pxa_set_ohci_info(&income_ohci_info);
}
#else
static inline void income_uhc_init(void) {}
#endif
/******************************************************************************
* LED
******************************************************************************/
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
struct gpio_led income_gpio_leds[] = {
{
.name = "income:green:leda",
.default_trigger = "none",
.gpio = GPIO54_INCOME_LED_A,
.active_low = 1,
},
{
.name = "income:green:ledb",
.default_trigger = "none",
.gpio = GPIO55_INCOME_LED_B,
.active_low = 1,
}
};
static struct gpio_led_platform_data income_gpio_led_info = {
.leds = income_gpio_leds,
.num_leds = ARRAY_SIZE(income_gpio_leds),
};
static struct platform_device income_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &income_gpio_led_info,
}
};
static void __init income_led_init(void)
{
platform_device_register(&income_leds);
}
#else
static inline void income_led_init(void) {}
#endif
/******************************************************************************
* I2C
******************************************************************************/
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
static struct i2c_board_info __initdata income_i2c_devs[] = {
{
I2C_BOARD_INFO("ds1340", 0x68),
}, {
I2C_BOARD_INFO("lm75", 0x4f),
},
};
static void __init income_i2c_init(void)
{
pxa_set_i2c_info(NULL);
pxa27x_set_i2c_power_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
}
#else
static inline void income_i2c_init(void) {}
#endif
/******************************************************************************
* Framebuffer
******************************************************************************/
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info income_lcd_modes[] = {
{
.pixclock = 144700,
.xres = 320,
.yres = 240,
.bpp = 32,
.depth = 18,
.left_margin = 10,
.right_margin = 10,
.upper_margin = 7,
.lower_margin = 8,
.hsync_len = 20,
.vsync_len = 2,
.sync = FB_SYNC_VERT_HIGH_ACT,
},
};
static struct pxafb_mach_info income_lcd_screen = {
.modes = income_lcd_modes,
.num_modes = ARRAY_SIZE(income_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
};
static void __init income_lcd_init(void)
{
set_pxa_fb_info(&income_lcd_screen);
}
#else
static inline void income_lcd_init(void) {}
#endif
/******************************************************************************
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
static struct platform_pwm_backlight_data income_backlight_data = {
.pwm_id = 0,
.max_brightness = 0x3ff,
.dft_brightness = 0x1ff,
.pwm_period_ns = 1000000,
};
static struct platform_device income_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &income_backlight_data,
},
};
static void __init income_pwm_init(void)
{
platform_device_register(&income_backlight);
}
#else
static inline void income_pwm_init(void) {}
#endif
void __init colibri_pxa270_income_boardinit(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
income_mmc_init();
income_uhc_init();
income_led_init();
income_i2c_init();
income_lcd_init();
income_pwm_init();
}