linux/drivers/net/wireless/rt2x00/Kconfig
Ivo van Doorn a7f3a06cbb rt2x00: Move firmware checksumming to driver
rt2x00lib depended on 2 crc algorithms because rt61/rt73
use a different algorithm then rt2800. This means that
even when only 1 algorithm was needed, the dependency was
still present for both.
By moving the checksum generation to the driver we can clean
up 2 annoying flags (which indicated which checksum was required)
and move the dependency to where it belongs: the driver.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13 16:02:36 -04:00

175 lines
4.4 KiB
Plaintext

config RT2X00
tristate "Ralink driver support"
depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
---help---
This will enable the experimental support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
These drivers will make use of the mac80211 stack.
When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as
a module) will be called "rt2x00lib.ko".
if RT2X00
config RT2X00_LIB
tristate
config RT2X00_LIB_PCI
tristate
select RT2X00_LIB
config RT2X00_LIB_USB
tristate
select RT2X00_LIB
config RT2X00_LIB_FIRMWARE
boolean
depends on RT2X00_LIB
select FW_LOADER
config RT2X00_LIB_RFKILL
boolean
depends on RT2X00_LIB
select RFKILL
select INPUT_POLLDEV
config RT2X00_LIB_LEDS
boolean
depends on RT2X00_LIB
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGERS
select MAC80211_LEDS
config RT2400PCI
tristate "Ralink rt2400 pci/pcmcia support"
depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
This is an experimental driver for the Ralink rt2400 wireless chip.
When compiled as a module, this driver will be called "rt2400pci.ko".
config RT2400PCI_RFKILL
bool "RT2400 rfkill support"
depends on RT2400PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2400 devices that feature a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT2400PCI_LEDS
bool "RT2400 leds support"
depends on RT2400PCI
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT2500PCI
tristate "Ralink rt2500 pci/pcmcia support"
depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
This is an experimental driver for the Ralink rt2500 wireless chip.
When compiled as a module, this driver will be called "rt2500pci.ko".
config RT2500PCI_RFKILL
bool "RT2500 rfkill support"
depends on RT2500PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2500 devices that feature a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT2500PCI_LEDS
bool "RT2500 leds support"
depends on RT2500PCI
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT61PCI
tristate "Ralink rt61 pci/pcmcia support"
depends on PCI
select RT2X00_LIB_PCI
select RT2X00_LIB_FIRMWARE
select CRC_ITU_T
select EEPROM_93CX6
---help---
This is an experimental driver for the Ralink rt61 wireless chip.
When compiled as a module, this driver will be called "rt61pci.ko".
config RT61PCI_RFKILL
bool "RT61 rfkill support"
depends on RT61PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt61 devices that feature a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT61PCI_LEDS
bool "RT61 leds support"
depends on RT61PCI
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT2500USB
tristate "Ralink rt2500 usb support"
depends on USB
select RT2X00_LIB_USB
---help---
This is an experimental driver for the Ralink rt2500 wireless chip.
When compiled as a module, this driver will be called "rt2500usb.ko".
config RT2500USB_LEDS
bool "RT2500 leds support"
depends on RT2500USB
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT73USB
tristate "Ralink rt73 usb support"
depends on USB
select RT2X00_LIB_USB
select RT2X00_LIB_FIRMWARE
select CRC_ITU_T
---help---
This is an experimental driver for the Ralink rt73 wireless chip.
When compiled as a module, this driver will be called "rt73usb.ko".
config RT73USB_LEDS
bool "RT73 leds support"
depends on RT73USB
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT2X00_LIB_DEBUGFS
bool "Ralink debugfs support"
depends on RT2X00_LIB && MAC80211_DEBUGFS
---help---
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
most important register types of the rt2x00 devices.
config RT2X00_DEBUG
bool "Ralink debug output"
depends on RT2X00_LIB
---help---
Enable debugging output for all rt2x00 modules
endif