linux/drivers/net/sfc/mdio_10g.c
Ben Hutchings 3f39a5e9bf sfc: Fix reporting of PHY id
Shuffle bits of the OUI into the conventional written order.

Replace PHY id component macros with functions.

Zero-pad PHY id components in log messages.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 03:15:04 -08:00

583 lines
16 KiB
C

/****************************************************************************
* Driver for Solarflare Solarstorm network controllers and boards
* Copyright 2006-2008 Solarflare Communications Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation, incorporated herein by reference.
*/
/*
* Useful functions for working with MDIO clause 45 PHYs
*/
#include <linux/types.h>
#include <linux/ethtool.h>
#include <linux/delay.h>
#include "net_driver.h"
#include "mdio_10g.h"
#include "boards.h"
#include "workarounds.h"
unsigned mdio_id_oui(u32 id)
{
unsigned oui = 0;
int i;
/* The bits of the OUI are designated a..x, with a=0 and b variable.
* In the id register c is the MSB but the OUI is conventionally
* written as bytes h..a, p..i, x..q. Reorder the bits accordingly. */
for (i = 0; i < 22; ++i)
if (id & (1 << (i + 10)))
oui |= 1 << (i ^ 7);
return oui;
}
int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
int spins, int spintime)
{
u32 ctrl;
int phy_id = port->mii.phy_id;
/* Catch callers passing values in the wrong units (or just silly) */
EFX_BUG_ON_PARANOID(spins * spintime >= 5000);
mdio_clause45_write(port, phy_id, mmd, MDIO_MMDREG_CTRL1,
(1 << MDIO_MMDREG_CTRL1_RESET_LBN));
/* Wait for the reset bit to clear. */
do {
msleep(spintime);
ctrl = mdio_clause45_read(port, phy_id, mmd, MDIO_MMDREG_CTRL1);
spins--;
} while (spins && (ctrl & (1 << MDIO_MMDREG_CTRL1_RESET_LBN)));
return spins ? spins : -ETIMEDOUT;
}
static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd,
int fault_fatal)
{
int status;
int phy_id = efx->mii.phy_id;
if (LOOPBACK_INTERNAL(efx))
return 0;
if (mmd != MDIO_MMD_AN) {
/* Read MMD STATUS2 to check it is responding. */
status = mdio_clause45_read(efx, phy_id, mmd,
MDIO_MMDREG_STAT2);
if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) &
((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) !=
MDIO_MMDREG_STAT2_PRESENT_VAL) {
EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd);
return -EIO;
}
}
/* Read MMD STATUS 1 to check for fault. */
status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT1);
if ((status & (1 << MDIO_MMDREG_STAT1_FAULT_LBN)) != 0) {
if (fault_fatal) {
EFX_ERR(efx, "PHY MMD %d reporting fatal"
" fault: status %x\n", mmd, status);
return -EIO;
} else {
EFX_LOG(efx, "PHY MMD %d reporting status"
" %x (expected)\n", mmd, status);
}
}
return 0;
}
/* This ought to be ridiculous overkill. We expect it to fail rarely */
#define MDIO45_RESET_TIME 1000 /* ms */
#define MDIO45_RESET_ITERS 100
int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
unsigned int mmd_mask)
{
const int spintime = MDIO45_RESET_TIME / MDIO45_RESET_ITERS;
int tries = MDIO45_RESET_ITERS;
int rc = 0;
int in_reset;
while (tries) {
int mask = mmd_mask;
int mmd = 0;
int stat;
in_reset = 0;
while (mask) {
if (mask & 1) {
stat = mdio_clause45_read(efx,
efx->mii.phy_id,
mmd,
MDIO_MMDREG_CTRL1);
if (stat < 0) {
EFX_ERR(efx, "failed to read status of"
" MMD %d\n", mmd);
return -EIO;
}
if (stat & (1 << MDIO_MMDREG_CTRL1_RESET_LBN))
in_reset |= (1 << mmd);
}
mask = mask >> 1;
mmd++;
}
if (!in_reset)
break;
tries--;
msleep(spintime);
}
if (in_reset != 0) {
EFX_ERR(efx, "not all MMDs came out of reset in time."
" MMDs still in reset: %x\n", in_reset);
rc = -ETIMEDOUT;
}
return rc;
}
int mdio_clause45_check_mmds(struct efx_nic *efx,
unsigned int mmd_mask, unsigned int fatal_mask)
{
int mmd = 0, probe_mmd, devs0, devs1;
u32 devices;
/* Historically we have probed the PHYXS to find out what devices are
* present,but that doesn't work so well if the PHYXS isn't expected
* to exist, if so just find the first item in the list supplied. */
probe_mmd = (mmd_mask & MDIO_MMDREG_DEVS_PHYXS) ? MDIO_MMD_PHYXS :
__ffs(mmd_mask);
/* Check all the expected MMDs are present */
devs0 = mdio_clause45_read(efx, efx->mii.phy_id,
probe_mmd, MDIO_MMDREG_DEVS0);
devs1 = mdio_clause45_read(efx, efx->mii.phy_id,
probe_mmd, MDIO_MMDREG_DEVS1);
if (devs0 < 0 || devs1 < 0) {
EFX_ERR(efx, "failed to read devices present\n");
return -EIO;
}
devices = devs0 | (devs1 << 16);
if ((devices & mmd_mask) != mmd_mask) {
EFX_ERR(efx, "required MMDs not present: got %x, "
"wanted %x\n", devices, mmd_mask);
return -ENODEV;
}
EFX_TRACE(efx, "Devices present: %x\n", devices);
/* Check all required MMDs are responding and happy. */
while (mmd_mask) {
if (mmd_mask & 1) {
int fault_fatal = fatal_mask & 1;
if (mdio_clause45_check_mmd(efx, mmd, fault_fatal))
return -EIO;
}
mmd_mask = mmd_mask >> 1;
fatal_mask = fatal_mask >> 1;
mmd++;
}
return 0;
}
bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
{
int phy_id = efx->mii.phy_id;
u32 reg;
bool ok = true;
int mmd = 0;
/* If the port is in loopback, then we should only consider a subset
* of mmd's */
if (LOOPBACK_INTERNAL(efx))
return true;
else if (efx->loopback_mode == LOOPBACK_NETWORK)
return false;
else if (efx_phy_mode_disabled(efx->phy_mode))
return false;
else if (efx->loopback_mode == LOOPBACK_PHYXS)
mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS |
MDIO_MMDREG_DEVS_PCS |
MDIO_MMDREG_DEVS_PMAPMD |
MDIO_MMDREG_DEVS_AN);
else if (efx->loopback_mode == LOOPBACK_PCS)
mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS |
MDIO_MMDREG_DEVS_PMAPMD |
MDIO_MMDREG_DEVS_AN);
else if (efx->loopback_mode == LOOPBACK_PMAPMD)
mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD |
MDIO_MMDREG_DEVS_AN);
if (!mmd_mask) {
/* Use presence of XGMII faults in leui of link state */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
MDIO_PHYXS_STATUS2);
return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
}
while (mmd_mask) {
if (mmd_mask & 1) {
/* Double reads because link state is latched, and a
* read moves the current state into the register */
reg = mdio_clause45_read(efx, phy_id,
mmd, MDIO_MMDREG_STAT1);
reg = mdio_clause45_read(efx, phy_id,
mmd, MDIO_MMDREG_STAT1);
ok = ok && (reg & (1 << MDIO_MMDREG_STAT1_LINK_LBN));
}
mmd_mask = (mmd_mask >> 1);
mmd++;
}
return ok;
}
void mdio_clause45_transmit_disable(struct efx_nic *efx)
{
mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_TXDIS, MDIO_MMDREG_TXDIS_GLOBAL_LBN,
efx->phy_mode & PHY_MODE_TX_DISABLED);
}
void mdio_clause45_phy_reconfigure(struct efx_nic *efx)
{
int phy_id = efx->mii.phy_id;
mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_CTRL1, MDIO_PMAPMD_CTRL1_LBACK_LBN,
efx->loopback_mode == LOOPBACK_PMAPMD);
mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PCS,
MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN,
efx->loopback_mode == LOOPBACK_PCS);
mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PHYXS,
MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN,
efx->loopback_mode == LOOPBACK_NETWORK);
}
static void mdio_clause45_set_mmd_lpower(struct efx_nic *efx,
int lpower, int mmd)
{
int phy = efx->mii.phy_id;
int stat = mdio_clause45_read(efx, phy, mmd, MDIO_MMDREG_STAT1);
EFX_TRACE(efx, "Setting low power mode for MMD %d to %d\n",
mmd, lpower);
if (stat & (1 << MDIO_MMDREG_STAT1_LPABLE_LBN)) {
mdio_clause45_set_flag(efx, phy, mmd, MDIO_MMDREG_CTRL1,
MDIO_MMDREG_CTRL1_LPOWER_LBN, lpower);
}
}
void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
int low_power, unsigned int mmd_mask)
{
int mmd = 0;
mmd_mask &= ~MDIO_MMDREG_DEVS_AN;
while (mmd_mask) {
if (mmd_mask & 1)
mdio_clause45_set_mmd_lpower(efx, low_power, mmd);
mmd_mask = (mmd_mask >> 1);
mmd++;
}
}
static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr)
{
int phy_id = efx->mii.phy_id;
u32 result = 0;
int reg;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, addr);
if (reg & ADVERTISE_10HALF)
result |= ADVERTISED_10baseT_Half;
if (reg & ADVERTISE_10FULL)
result |= ADVERTISED_10baseT_Full;
if (reg & ADVERTISE_100HALF)
result |= ADVERTISED_100baseT_Half;
if (reg & ADVERTISE_100FULL)
result |= ADVERTISED_100baseT_Full;
return result;
}
/**
* mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO.
* @efx: Efx NIC
* @ecmd: Buffer for settings
*
* On return the 'port', 'speed', 'supported' and 'advertising' fields of
* ecmd have been filled out.
*/
void mdio_clause45_get_settings(struct efx_nic *efx,
struct ethtool_cmd *ecmd)
{
mdio_clause45_get_settings_ext(efx, ecmd, 0, 0);
}
/**
* mdio_clause45_get_settings_ext - Read (some of) the PHY settings over MDIO.
* @efx: Efx NIC
* @ecmd: Buffer for settings
* @xnp: Advertised Extended Next Page state
* @xnp_lpa: Link Partner's advertised XNP state
*
* On return the 'port', 'speed', 'supported' and 'advertising' fields of
* ecmd have been filled out.
*/
void mdio_clause45_get_settings_ext(struct efx_nic *efx,
struct ethtool_cmd *ecmd,
u32 npage_adv, u32 npage_lpa)
{
int phy_id = efx->mii.phy_id;
int reg;
ecmd->transceiver = XCVR_INTERNAL;
ecmd->phy_address = phy_id;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_CTRL2);
switch (reg & MDIO_PMAPMD_CTRL2_TYPE_MASK) {
case MDIO_PMAPMD_CTRL2_10G_BT:
case MDIO_PMAPMD_CTRL2_1G_BT:
case MDIO_PMAPMD_CTRL2_100_BT:
case MDIO_PMAPMD_CTRL2_10_BT:
ecmd->port = PORT_TP;
ecmd->supported = SUPPORTED_TP;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_SPEED);
if (reg & (1 << MDIO_MMDREG_SPEED_10G_LBN))
ecmd->supported |= SUPPORTED_10000baseT_Full;
if (reg & (1 << MDIO_MMDREG_SPEED_1000M_LBN))
ecmd->supported |= (SUPPORTED_1000baseT_Full |
SUPPORTED_1000baseT_Half);
if (reg & (1 << MDIO_MMDREG_SPEED_100M_LBN))
ecmd->supported |= (SUPPORTED_100baseT_Full |
SUPPORTED_100baseT_Half);
if (reg & (1 << MDIO_MMDREG_SPEED_10M_LBN))
ecmd->supported |= (SUPPORTED_10baseT_Full |
SUPPORTED_10baseT_Half);
ecmd->advertising = ADVERTISED_TP;
break;
/* We represent CX4 as fibre in the absence of anything better */
case MDIO_PMAPMD_CTRL2_10G_CX4:
/* All the other defined modes are flavours of optical */
default:
ecmd->port = PORT_FIBRE;
ecmd->supported = SUPPORTED_FIBRE;
ecmd->advertising = ADVERTISED_FIBRE;
break;
}
if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
ecmd->supported |= SUPPORTED_Autoneg;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1);
if (reg & BMCR_ANENABLE) {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->advertising |=
ADVERTISED_Autoneg |
mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) |
npage_adv;
} else
ecmd->autoneg = AUTONEG_DISABLE;
} else
ecmd->autoneg = AUTONEG_DISABLE;
if (ecmd->autoneg) {
/* If AN is complete, report best common mode,
* otherwise report best advertised mode. */
u32 modes = 0;
if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_STAT1) &
(1 << MDIO_AN_STATUS_AN_DONE_LBN))
modes = (ecmd->advertising &
(mdio_clause45_get_an(efx, MDIO_AN_LPA) |
npage_lpa));
if (modes == 0)
modes = ecmd->advertising;
if (modes & ADVERTISED_10000baseT_Full) {
ecmd->speed = SPEED_10000;
ecmd->duplex = DUPLEX_FULL;
} else if (modes & (ADVERTISED_1000baseT_Full |
ADVERTISED_1000baseT_Half)) {
ecmd->speed = SPEED_1000;
ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full);
} else if (modes & (ADVERTISED_100baseT_Full |
ADVERTISED_100baseT_Half)) {
ecmd->speed = SPEED_100;
ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
} else {
ecmd->speed = SPEED_10;
ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
}
} else {
/* Report forced settings */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_CTRL1);
ecmd->speed = (((reg & BMCR_SPEED1000) ? 100 : 1) *
((reg & BMCR_SPEED100) ? 100 : 10));
ecmd->duplex = (reg & BMCR_FULLDPLX ||
ecmd->speed == SPEED_10000);
}
}
/**
* mdio_clause45_set_settings - Set (some of) the PHY settings over MDIO.
* @efx: Efx NIC
* @ecmd: New settings
*/
int mdio_clause45_set_settings(struct efx_nic *efx,
struct ethtool_cmd *ecmd)
{
int phy_id = efx->mii.phy_id;
struct ethtool_cmd prev;
u32 required;
int reg;
efx->phy_op->get_settings(efx, &prev);
if (ecmd->advertising == prev.advertising &&
ecmd->speed == prev.speed &&
ecmd->duplex == prev.duplex &&
ecmd->port == prev.port &&
ecmd->autoneg == prev.autoneg)
return 0;
/* We can only change these settings for -T PHYs */
if (prev.port != PORT_TP || ecmd->port != PORT_TP)
return -EINVAL;
/* Check that PHY supports these settings */
if (ecmd->autoneg) {
required = SUPPORTED_Autoneg;
} else if (ecmd->duplex) {
switch (ecmd->speed) {
case SPEED_10: required = SUPPORTED_10baseT_Full; break;
case SPEED_100: required = SUPPORTED_100baseT_Full; break;
default: return -EINVAL;
}
} else {
switch (ecmd->speed) {
case SPEED_10: required = SUPPORTED_10baseT_Half; break;
case SPEED_100: required = SUPPORTED_100baseT_Half; break;
default: return -EINVAL;
}
}
required |= ecmd->advertising;
if (required & ~prev.supported)
return -EINVAL;
if (ecmd->autoneg) {
bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
|| EFX_WORKAROUND_13204(efx));
/* Set up the base page */
reg = ADVERTISE_CSMA;
if (ecmd->advertising & ADVERTISED_10baseT_Half)
reg |= ADVERTISE_10HALF;
if (ecmd->advertising & ADVERTISED_10baseT_Full)
reg |= ADVERTISE_10FULL;
if (ecmd->advertising & ADVERTISED_100baseT_Half)
reg |= ADVERTISE_100HALF;
if (ecmd->advertising & ADVERTISED_100baseT_Full)
reg |= ADVERTISE_100FULL;
if (xnp)
reg |= ADVERTISE_RESV;
else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full))
reg |= ADVERTISE_NPAGE;
reg |= efx_fc_advertise(efx->wanted_fc);
mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
MDIO_AN_ADVERTISE, reg);
/* Set up the (extended) next page if necessary */
if (efx->phy_op->set_npage_adv)
efx->phy_op->set_npage_adv(efx, ecmd->advertising);
/* Enable and restart AN */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1);
reg |= BMCR_ANENABLE;
if (!(EFX_WORKAROUND_15195(efx) &&
LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
reg |= BMCR_ANRESTART;
if (xnp)
reg |= 1 << MDIO_AN_CTRL_XNP_LBN;
else
reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN);
mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1, reg);
} else {
/* Disable AN */
mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1,
__ffs(BMCR_ANENABLE), false);
/* Set the basic control bits */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_CTRL1);
reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX |
0x003c);
if (ecmd->speed == SPEED_100)
reg |= BMCR_SPEED100;
if (ecmd->duplex)
reg |= BMCR_FULLDPLX;
mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_CTRL1, reg);
}
return 0;
}
void mdio_clause45_set_pause(struct efx_nic *efx)
{
int phy_id = efx->mii.phy_id;
int reg;
if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
/* Set pause capability advertising */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_AN_ADVERTISE);
reg &= ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
reg |= efx_fc_advertise(efx->wanted_fc);
mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
MDIO_AN_ADVERTISE, reg);
/* Restart auto-negotiation */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1);
if (reg & BMCR_ANENABLE) {
reg |= BMCR_ANRESTART;
mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1, reg);
}
}
}
enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx)
{
int phy_id = efx->mii.phy_id;
int lpa;
if (!(efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)))
return efx->wanted_fc;
lpa = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_AN_LPA);
return efx_fc_resolve(efx->wanted_fc, lpa);
}
void mdio_clause45_set_flag(struct efx_nic *efx, u8 prt, u8 dev,
u16 addr, int bit, bool sense)
{
int old_val = mdio_clause45_read(efx, prt, dev, addr);
int new_val;
if (sense)
new_val = old_val | (1 << bit);
else
new_val = old_val & ~(1 << bit);
if (old_val != new_val)
mdio_clause45_write(efx, prt, dev, addr, new_val);
}