linux/Documentation/devicetree/bindings/mfd/twl-familly.txt
Benoit Cousson aeb5032b3f mfd: twl-core: Add initial DT support for twl4030/twl6030
Add initial device-tree support for twl familly chips.
The current version is missing the regulator entries due
to the lack of DT regulator bindings for the moment.
Only the simple sub-modules that do not depend on
platform_data information can be initialized properly.

Add irqdomain support.

Add documentation for the Texas Instruments TWL Integrated Chip.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Balaji T K <balajitk@ti.com>
Cc: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
[grant.likely@secretlab.ca: Fix IRQ_DOMAIN dependency in kconfig]
Cc: Grant Likely <grant.likely@secretlab.ca>
2012-01-09 00:37:40 +01:00

48 lines
1.4 KiB
Plaintext

Texas Instruments TWL family
The TWLs are Integrated Power Management Chips.
Some version might contain much more analog function like
USB transceiver or Audio amplifier.
These chips are connected to an i2c bus.
Required properties:
- compatible : Must be "ti,twl4030";
For Integrated power-management/audio CODEC device used in OMAP3
based boards
- compatible : Must be "ti,twl6030";
For Integrated power-management used in OMAP4 based boards
- interrupts : This i2c device has an IRQ line connected to the main SoC
- interrupt-controller : Since the twl support several interrupts internally,
it is considered as an interrupt controller cascaded to the SoC one.
- #interrupt-cells = <1>;
- interrupt-parent : The parent interrupt controller.
Optional node:
- Child nodes contain in the twl. The twl family is made of several variants
that support a different number of features.
The children nodes will thus depend of the capability of the variant.
Example:
/*
* Integrated Power Management Chip
* http://www.ti.com/lit/ds/symlink/twl6030.pdf
*/
twl@48 {
compatible = "ti,twl6030";
reg = <0x48>;
interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <0>;
twl_rtc {
compatible = "ti,twl_rtc";
interrupts = <11>;
reg = <0>;
};
};