linux/arch/arm/mach-pxa/tavorevb3.c
Sebastian Andrzej Siewior b459396ee9 ARM: pxa2xx: reorganize I2C files
This patch moves the platform data definition from
arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so
it can be accessed from x86 the same way as on ARM.

This change should make no functional change to the PXA code. The move
is verified by building the following defconfigs:
  cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig
  imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig
  raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig
  pxa910_defconfig

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-21 09:09:33 +00:00

135 lines
2.9 KiB
C

/*
* linux/arch/arm/mach-pxa/tavorevb3.c
*
* Support for the Marvell EVB3 Development Platform.
*
* Copyright: (C) Copyright 2008-2010 Marvell International Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/gpio.h>
#include <linux/mfd/88pm860x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa930.h>
#include "devices.h"
#include "generic.h"
#define TAVOREVB3_NR_IRQS (IRQ_BOARD_START + 24)
static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
/* UART */
GPIO53_UART1_TXD,
GPIO54_UART1_RXD,
/* PMIC */
PMIC_INT_GPIO83,
};
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
static struct pm860x_touch_pdata evb3_touch = {
.gpadc_prebias = 1,
.slot_cycle = 1,
.tsi_prebias = 6,
.pen_prebias = 16,
.pen_prechg = 2,
.res_x = 300,
};
static struct pm860x_backlight_pdata evb3_backlight[] = {
{
.id = PM8606_ID_BACKLIGHT,
.iset = PM8606_WLED_CURRENT(24),
.flags = PM8606_BACKLIGHT1,
},
{},
};
static struct pm860x_led_pdata evb3_led[] = {
{
.id = PM8606_ID_LED,
.iset = PM8606_LED_CURRENT(12),
.flags = PM8606_LED1_RED,
}, {
.id = PM8606_ID_LED,
.iset = PM8606_LED_CURRENT(12),
.flags = PM8606_LED1_GREEN,
}, {
.id = PM8606_ID_LED,
.iset = PM8606_LED_CURRENT(12),
.flags = PM8606_LED1_BLUE,
}, {
.id = PM8606_ID_LED,
.iset = PM8606_LED_CURRENT(12),
.flags = PM8606_LED2_RED,
}, {
.id = PM8606_ID_LED,
.iset = PM8606_LED_CURRENT(12),
.flags = PM8606_LED2_GREEN,
}, {
.id = PM8606_ID_LED,
.iset = PM8606_LED_CURRENT(12),
.flags = PM8606_LED2_BLUE,
},
};
static struct pm860x_platform_data evb3_pm8607_info = {
.touch = &evb3_touch,
.backlight = &evb3_backlight[0],
.led = &evb3_led[0],
.companion_addr = 0x10,
.irq_mode = 0,
.irq_base = IRQ_BOARD_START,
.i2c_port = GI2C_PORT,
};
static struct i2c_board_info evb3_i2c_info[] = {
{
.type = "88PM860x",
.addr = 0x34,
.platform_data = &evb3_pm8607_info,
.irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
static void __init evb3_init_i2c(void)
{
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
}
#else
static inline void evb3_init_i2c(void) {}
#endif
static void __init evb3_init(void)
{
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
pxa_set_ffuart_info(NULL);
evb3_init_i2c();
}
MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = evb3_init,
MACHINE_END