linux/arch/arm64/Kconfig.platforms
Linus Torvalds d461e96cd2 ARM: SoC drivers for 5.16
These are all the driver updates for SoC specific drivers. There
 are a couple of subsystems with individual maintainers picking up
 their patches here:
 
  - The reset controller subsystem add support for a few new SoC
    variants to existing drivers, along with other minor improvements
 
  - The OP-TEE subsystem gets a driver for the ARM FF-A transport
 
  - The memory controller subsystem has improvements for Tegra,
    Mediatek, Renesas, Freescale and Broadcom specific drivers.
 
  - The tegra cpuidle driver changes get merged through this
    tree this time. There are only minor changes, but they depend
    on other tegra driver updates here.
 
  - The ep93xx platform finally moves to using the drivers/clk/
    subsystem, moving the code out of arch/arm in the process.
    This depends on a small sound driver change that is included
    here as well.
 
  - There are some minor updates for Qualcomm and Tegra specific
    firmware drivers.
 
 The other driver updates are mainly for drivers/soc, which contains
 a mixture of vendor specific drivers that don't really fit elsewhere:
 
  - Mediatek drivers gain more support for MT8192, with new support for
    hw-mutex and mmsys routing, plus support for reset lines in the
    mmsys driver.
 
  - Qualcomm gains a new "sleep stats" driver, and support for
    the "Generic Packet Router" in the APR driver.
 
  - There is a new user interface for routing the UARTS on ASpeed
    BMCs, something that apparently nobody else has needed so far.
 
  - More drivers can now be built as loadable modules, in particular
    for Broadcom and Samsung platforms.
 
  - Lots of improvements to the TI sysc driver for better suspend/resume
    support
 
 Finally, there are lots of minor cleanups and new device IDs for
 amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
 allwinner, broadcom, and omap.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmGCvKgACgkQmmx57+YA
 GNnNfw/8DDTfMUycVvtaNslYlWri0/2O0nSqhNIIbTAcVuD/x5qo/McDhKuv+ldM
 BoTDMjRYZfQkrNXSEj3MaxB9E0o6Srva5SM8y4+Koe0VVtvEVovjYkXOhXqSEWWl
 aqVIe0S6Y1rF/KxJlvAfGxYHb5d+6aYqzdmhjURpXNGxqpSHb9/hqisY97Q9TpnD
 6lQZOz9d1JNDq0eOh1qjcfuMjg1EHZHDZJyioCvyX38KIl2q7p3ll2z/eqrrDhQZ
 TrvL/YVosTXqBcAfi47Oz+n/CX2i0MrjVO8nfPSGOq5UL4Al3SZD4XYY96IOIQrH
 +XGFigGGAkV2LfKSEPNJWaq7g+SiQUr2jc3p8b4Zxde8/+5M127/gotiPddyG2LX
 1OnFRnPskgRApGqHjGEcEzzJUTag7Hc+YVH82TMEHZhSDMq6i30k9UnyfXsziZDV
 8CrkOpjuSg+YxFv/83bfa1pIoYtFfjGr16mq4muajodnX7+b7My9iv+2Oo2iQM9y
 DwRUKj7+eap23SEUpi4et6HlNpoF6yJMbt5Ae1k+gTK2DvQ4Cx6n4QJz/I7WC1Wp
 BdVhvSH8XVppVLtQqODud+VWvLgLerRxUpGRdbS8r5VsnNUJTvaS4YGMpm9616G7
 TrgUSSvsyu1lLqbWMh+pOCk4l3r64vSUn581hrIw6jtioNGvMdE=
 =tUuj
 -----END PGP SIGNATURE-----

Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are all the driver updates for SoC specific drivers. There are a
  couple of subsystems with individual maintainers picking up their
  patches here:

   - The reset controller subsystem add support for a few new SoC
     variants to existing drivers, along with other minor improvements

   - The OP-TEE subsystem gets a driver for the ARM FF-A transport

   - The memory controller subsystem has improvements for Tegra,
     Mediatek, Renesas, Freescale and Broadcom specific drivers.

   - The tegra cpuidle driver changes get merged through this tree this
     time. There are only minor changes, but they depend on other tegra
     driver updates here.

   - The ep93xx platform finally moves to using the drivers/clk/
     subsystem, moving the code out of arch/arm in the process. This
     depends on a small sound driver change that is included here as
     well.

   - There are some minor updates for Qualcomm and Tegra specific
     firmware drivers.

  The other driver updates are mainly for drivers/soc, which contains a
  mixture of vendor specific drivers that don't really fit elsewhere:

   - Mediatek drivers gain more support for MT8192, with new support for
     hw-mutex and mmsys routing, plus support for reset lines in the
     mmsys driver.

   - Qualcomm gains a new "sleep stats" driver, and support for the
     "Generic Packet Router" in the APR driver.

   - There is a new user interface for routing the UARTS on ASpeed BMCs,
     something that apparently nobody else has needed so far.

   - More drivers can now be built as loadable modules, in particular
     for Broadcom and Samsung platforms.

   - Lots of improvements to the TI sysc driver for better
     suspend/resume support"

  Finally, there are lots of minor cleanups and new device IDs for
  amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
  layerscape, allwinner, broadcom, and omap"

* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
  optee: Fix spelling mistake "reclain" -> "reclaim"
  Revert "firmware: qcom: scm: Add support for MC boot address API"
  qcom: spm: allow compile-testing
  firmware: arm_ffa: Remove unused 'compat_version' variable
  soc: samsung: exynos-chipid: add exynosautov9 SoC support
  firmware: qcom: scm: Don't break compile test on non-ARM platforms
  soc: qcom: smp2p: Add of_node_put() before goto
  soc: qcom: apr: Add of_node_put() before return
  soc: qcom: qcom_stats: Fix client votes offset
  soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
  dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
  ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
  firmware: qcom: scm: Add support for MC boot address API
  soc: qcom: spm: Add 8916 SPM register data
  dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
  soc: qcom: socinfo: Add PM8150C and SMB2351 models
  firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
  soc: aspeed: Add UART routing support
  soc: fsl: dpio: rename the enqueue descriptor variable
  soc: fsl: dpio: use an explicit NULL instead of 0
  ...
2021-11-03 17:00:52 -07:00

326 lines
7.6 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0-only
menu "Platform selection"
config ARCH_ACTIONS
bool "Actions Semi Platforms"
select OWL_TIMER
select PINCTRL
help
This enables support for the Actions Semiconductor S900 SoC family.
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN_HIERARCHY
select IRQ_FASTEOI_HIERARCHY_HANDLERS
select PINCTRL
select RESET_CONTROLLER
select SUN4I_TIMER
help
This enables support for Allwinner sunxi based SoCs like the A64.
config ARCH_ALPINE
bool "Annapurna Labs Alpine platform"
select ALPINE_MSI if PCI
help
This enables support for the Annapurna Labs Alpine
Soc family.
config ARCH_APPLE
bool "Apple Silicon SoC family"
select APPLE_AIC
help
This enables support for Apple's in-house ARM SoC family, starting
with the Apple M1.
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
select TIMER_OF
select GPIOLIB
select MFD_CORE
select PINCTRL
select PINCTRL_BCM2835
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
help
This enables support for the Broadcom BCM2837 and BCM2711 SoC.
These SoCs are used in the Raspberry Pi 3 and 4 devices.
config ARCH_BCM4908
bool "Broadcom BCM4908 family"
select GPIOLIB
help
This enables support for the Broadcom BCM4906, BCM4908 and
BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
found in home routers.
config ARCH_BCM_IPROC
bool "Broadcom iProc SoC Family"
select COMMON_CLK_IPROC
select GPIOLIB
select PINCTRL
help
This enables support for Broadcom iProc based SoCs
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
select DW_APB_ICTL
select DW_APB_TIMER_OF
select GPIOLIB
select PINCTRL
help
This enables support for Marvell Berlin SoC Family
config ARCH_BITMAIN
bool "Bitmain SoC Platforms"
help
This enables support for the Bitmain SoC Family.
config ARCH_BRCMSTB
bool "Broadcom Set-Top-Box SoCs"
select ARCH_HAS_RESET_CONTROLLER
select GENERIC_IRQ_CHIP
select PINCTRL
help
This enables support for Broadcom's ARMv8 Set Top Box SoCs
config ARCH_EXYNOS
bool "ARMv8 based Samsung Exynos SoC family"
select COMMON_CLK_SAMSUNG
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select EXYNOS_PMU
select PINCTRL
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select SOC_SAMSUNG
help
This enables support for ARMv8 based Samsung Exynos SoC family.
config ARCH_SPARX5
bool "ARMv8 based Microchip Sparx5 SoC family"
select PINCTRL
select DW_APB_TIMER_OF
help
This enables support for the Microchip Sparx5 ARMv8-based
SoC family of TSN-capable gigabit switches.
The SparX-5 Ethernet switch family provides a rich set of
switching features such as advanced TCAM-based VLAN and QoS
processing enabling delivery of differentiated services, and
security through TCAM-based frame processing using versatile
content aware processor (VCAP).
config ARCH_K3
bool "Texas Instruments Inc. K3 multicore SoC architecture"
select PM_GENERIC_DOMAINS if PM
select MAILBOX
select SOC_TI
select TI_MESSAGE_MANAGER
select TI_SCI_PROTOCOL
select TI_SCI_INTR_IRQCHIP
select TI_SCI_INTA_IRQCHIP
select TI_K3_SOCINFO
help
This enables support for Texas Instruments' K3 multicore SoC
architecture.
config ARCH_LAYERSCAPE
bool "ARMv8 based Freescale Layerscape SoC family"
select EDAC_SUPPORT
help
This enables support for the Freescale Layerscape SoC family.
config ARCH_LG1K
bool "LG Electronics LG1K SoC Family"
help
This enables support for LG Electronics LG1K SoC Family
config ARCH_HISI
bool "Hisilicon SoC Family"
select ARM_TIMER_SP804
select HISILICON_IRQ_MBIGEN if PCI
select PINCTRL
help
This enables support for Hisilicon ARMv8 SoC family
config ARCH_KEEMBAY
bool "Keem Bay SoC"
help
This enables support for Intel Movidius SoC code-named Keem Bay.
config ARCH_MEDIATEK
bool "MediaTek SoC Family"
select ARM_GIC
select PINCTRL
select MTK_TIMER
help
This enables support for MediaTek MT27xx, MT65xx, MT76xx
& MT81xx ARMv8 SoCs
config ARCH_MESON
bool "Amlogic Platforms"
select COMMON_CLK
help
This enables support for the arm64 based Amlogic SoCs
such as the s905, S905X/D, S912, A113X/D or S905X/D2
config ARCH_MVEBU
bool "Marvell EBU SoC Family"
select ARMADA_AP806_SYSCON
select ARMADA_CP110_SYSCON
select ARMADA_37XX_CLK
select GPIOLIB
select GPIOLIB_IRQCHIP
select MVEBU_GICP
select MVEBU_ICU
select MVEBU_ODMI
select MVEBU_PIC
select MVEBU_SEI
select OF_GPIO
select PINCTRL
select PINCTRL_ARMADA_37XX
select PINCTRL_ARMADA_AP806
select PINCTRL_ARMADA_CP110
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family
- Armada 7K SoC Family
- Armada 8K SoC Family
config ARCH_MXC
bool "ARMv8 based NXP i.MX SoC family"
select ARM64_ERRATUM_843419
select ARM64_ERRATUM_845719 if COMPAT
select IMX_GPCV2
select IMX_GPCV2_PM_DOMAINS
select PM
select PM_GENERIC_DOMAINS
select SOC_BUS
select TIMER_IMX_SYS_CTR
help
This enables support for the ARMv8 based SoCs in the
NXP i.MX family.
config ARCH_QCOM
bool "Qualcomm Platforms"
select GPIOLIB
select PINCTRL
help
This enables support for the ARMv8 based Qualcomm chipsets.
config ARCH_REALTEK
bool "Realtek Platforms"
select RESET_CONTROLLER
help
This enables support for the ARMv8 based Realtek chipsets,
like the RTD1295.
config ARCH_RENESAS
bool "Renesas SoC Platforms"
select GPIOLIB
select PINCTRL
select SOC_BUS
help
This enables support for the ARMv8 based Renesas SoCs.
config ARCH_ROCKCHIP
bool "Rockchip Platforms"
select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
select PM
select ROCKCHIP_TIMER
help
This enables support for the ARMv8 based Rockchip chipsets,
like the RK3368.
config ARCH_S32
bool "NXP S32 SoC Family"
help
This enables support for the NXP S32 family of processors.
config ARCH_SEATTLE
bool "AMD Seattle SoC Family"
help
This enables support for AMD Seattle SOC Family
config ARCH_INTEL_SOCFPGA
bool "Intel's SoCFPGA ARMv8 Families"
help
This enables support for Intel's SoCFPGA ARMv8 families:
Stratix 10 (ex. Altera), Agilex and eASIC N5X.
config ARCH_SYNQUACER
bool "Socionext SynQuacer SoC Family"
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC_PM
select CLKSRC_MMIO
select TIMER_OF
select GPIOLIB
select PINCTRL
select PM
select PM_GENERIC_DOMAINS
select RESET_CONTROLLER
help
This enables support for the NVIDIA Tegra SoC family.
config ARCH_SPRD
bool "Spreadtrum SoC platform"
help
Support for Spreadtrum ARM based SoCs
config ARCH_THUNDER
bool "Cavium Inc. Thunder SoC Family"
help
This enables support for Cavium's Thunder Family of SoCs.
config ARCH_THUNDER2
bool "Cavium ThunderX2 Server Processors"
select GPIOLIB
help
This enables support for Cavium's ThunderX2 CN99XX family of
server processors.
config ARCH_UNIPHIER
bool "Socionext UniPhier SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
select RESET_CONTROLLER
help
This enables support for Socionext UniPhier SoC family.
config ARCH_VEXPRESS
bool "ARMv8 software model (Versatile Express)"
select GPIOLIB
select PM
select PM_GENERIC_DOMAINS
help
This enables support for the ARMv8 software model (Versatile
Express).
config ARCH_VISCONTI
bool "Toshiba Visconti SoC Family"
select PINCTRL
select PINCTRL_VISCONTI
help
This enables support for Toshiba Visconti SoCs Family.
config ARCH_VULCAN
def_bool n
config ARCH_XGENE
bool "AppliedMicro X-Gene SOC Family"
help
This enables support for AppliedMicro X-Gene SOC Family
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
help
This enables support for Xilinx ZynqMP Family
endmenu