linux/drivers/bus/arm-cci.c
Linus Torvalds f47671e2d8 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...
2013-11-14 08:51:29 +09:00

1131 lines
28 KiB
C

/*
* CCI cache coherent interconnect driver
*
* Copyright (C) 2013 ARM Ltd.
* Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/arm-cci.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <asm/cacheflush.h>
#include <asm/irq_regs.h>
#include <asm/pmu.h>
#include <asm/smp_plat.h>
#define DRIVER_NAME "CCI-400"
#define DRIVER_NAME_PMU DRIVER_NAME " PMU"
#define PMU_NAME "CCI_400"
#define CCI_PORT_CTRL 0x0
#define CCI_CTRL_STATUS 0xc
#define CCI_ENABLE_SNOOP_REQ 0x1
#define CCI_ENABLE_DVM_REQ 0x2
#define CCI_ENABLE_REQ (CCI_ENABLE_SNOOP_REQ | CCI_ENABLE_DVM_REQ)
struct cci_nb_ports {
unsigned int nb_ace;
unsigned int nb_ace_lite;
};
enum cci_ace_port_type {
ACE_INVALID_PORT = 0x0,
ACE_PORT,
ACE_LITE_PORT,
};
struct cci_ace_port {
void __iomem *base;
unsigned long phys;
enum cci_ace_port_type type;
struct device_node *dn;
};
static struct cci_ace_port *ports;
static unsigned int nb_cci_ports;
static void __iomem *cci_ctrl_base;
static unsigned long cci_ctrl_phys;
#ifdef CONFIG_HW_PERF_EVENTS
#define CCI_PMCR 0x0100
#define CCI_PID2 0x0fe8
#define CCI_PMCR_CEN 0x00000001
#define CCI_PMCR_NCNT_MASK 0x0000f800
#define CCI_PMCR_NCNT_SHIFT 11
#define CCI_PID2_REV_MASK 0xf0
#define CCI_PID2_REV_SHIFT 4
/* Port ids */
#define CCI_PORT_S0 0
#define CCI_PORT_S1 1
#define CCI_PORT_S2 2
#define CCI_PORT_S3 3
#define CCI_PORT_S4 4
#define CCI_PORT_M0 5
#define CCI_PORT_M1 6
#define CCI_PORT_M2 7
#define CCI_REV_R0 0
#define CCI_REV_R1 1
#define CCI_REV_R0_P4 4
#define CCI_REV_R1_P2 6
#define CCI_PMU_EVT_SEL 0x000
#define CCI_PMU_CNTR 0x004
#define CCI_PMU_CNTR_CTRL 0x008
#define CCI_PMU_OVRFLW 0x00c
#define CCI_PMU_OVRFLW_FLAG 1
#define CCI_PMU_CNTR_BASE(idx) ((idx) * SZ_4K)
/*
* Instead of an event id to monitor CCI cycles, a dedicated counter is
* provided. Use 0xff to represent CCI cycles and hope that no future revisions
* make use of this event in hardware.
*/
enum cci400_perf_events {
CCI_PMU_CYCLES = 0xff
};
#define CCI_PMU_EVENT_MASK 0xff
#define CCI_PMU_EVENT_SOURCE(event) ((event >> 5) & 0x7)
#define CCI_PMU_EVENT_CODE(event) (event & 0x1f)
#define CCI_PMU_MAX_HW_EVENTS 5 /* CCI PMU has 4 counters + 1 cycle counter */
#define CCI_PMU_CYCLE_CNTR_IDX 0
#define CCI_PMU_CNTR0_IDX 1
#define CCI_PMU_CNTR_LAST(cci_pmu) (CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1)
/*
* CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8
* ports and bits 4:0 are event codes. There are different event codes
* associated with each port type.
*
* Additionally, the range of events associated with the port types changed
* between Rev0 and Rev1.
*
* The constants below define the range of valid codes for each port type for
* the different revisions and are used to validate the event to be monitored.
*/
#define CCI_REV_R0_SLAVE_PORT_MIN_EV 0x00
#define CCI_REV_R0_SLAVE_PORT_MAX_EV 0x13
#define CCI_REV_R0_MASTER_PORT_MIN_EV 0x14
#define CCI_REV_R0_MASTER_PORT_MAX_EV 0x1a
#define CCI_REV_R1_SLAVE_PORT_MIN_EV 0x00
#define CCI_REV_R1_SLAVE_PORT_MAX_EV 0x14
#define CCI_REV_R1_MASTER_PORT_MIN_EV 0x00
#define CCI_REV_R1_MASTER_PORT_MAX_EV 0x11
struct pmu_port_event_ranges {
u8 slave_min;
u8 slave_max;
u8 master_min;
u8 master_max;
};
static struct pmu_port_event_ranges port_event_range[] = {
[CCI_REV_R0] = {
.slave_min = CCI_REV_R0_SLAVE_PORT_MIN_EV,
.slave_max = CCI_REV_R0_SLAVE_PORT_MAX_EV,
.master_min = CCI_REV_R0_MASTER_PORT_MIN_EV,
.master_max = CCI_REV_R0_MASTER_PORT_MAX_EV,
},
[CCI_REV_R1] = {
.slave_min = CCI_REV_R1_SLAVE_PORT_MIN_EV,
.slave_max = CCI_REV_R1_SLAVE_PORT_MAX_EV,
.master_min = CCI_REV_R1_MASTER_PORT_MIN_EV,
.master_max = CCI_REV_R1_MASTER_PORT_MAX_EV,
},
};
struct cci_pmu_drv_data {
void __iomem *base;
struct arm_pmu *cci_pmu;
int nr_irqs;
int irqs[CCI_PMU_MAX_HW_EVENTS];
unsigned long active_irqs;
struct perf_event *events[CCI_PMU_MAX_HW_EVENTS];
unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)];
struct pmu_port_event_ranges *port_ranges;
struct pmu_hw_events hw_events;
};
static struct cci_pmu_drv_data *pmu;
static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs)
{
int i;
for (i = 0; i < nr_irqs; i++)
if (irq == irqs[i])
return true;
return false;
}
static int probe_cci_revision(void)
{
int rev;
rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
rev >>= CCI_PID2_REV_SHIFT;
if (rev <= CCI_REV_R0_P4)
return CCI_REV_R0;
else if (rev <= CCI_REV_R1_P2)
return CCI_REV_R1;
return -ENOENT;
}
static struct pmu_port_event_ranges *port_range_by_rev(void)
{
int rev = probe_cci_revision();
if (rev < 0)
return NULL;
return &port_event_range[rev];
}
static int pmu_is_valid_slave_event(u8 ev_code)
{
return pmu->port_ranges->slave_min <= ev_code &&
ev_code <= pmu->port_ranges->slave_max;
}
static int pmu_is_valid_master_event(u8 ev_code)
{
return pmu->port_ranges->master_min <= ev_code &&
ev_code <= pmu->port_ranges->master_max;
}
static int pmu_validate_hw_event(u8 hw_event)
{
u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event);
u8 ev_code = CCI_PMU_EVENT_CODE(hw_event);
switch (ev_source) {
case CCI_PORT_S0:
case CCI_PORT_S1:
case CCI_PORT_S2:
case CCI_PORT_S3:
case CCI_PORT_S4:
/* Slave Interface */
if (pmu_is_valid_slave_event(ev_code))
return hw_event;
break;
case CCI_PORT_M0:
case CCI_PORT_M1:
case CCI_PORT_M2:
/* Master Interface */
if (pmu_is_valid_master_event(ev_code))
return hw_event;
break;
}
return -ENOENT;
}
static int pmu_is_valid_counter(struct arm_pmu *cci_pmu, int idx)
{
return CCI_PMU_CYCLE_CNTR_IDX <= idx &&
idx <= CCI_PMU_CNTR_LAST(cci_pmu);
}
static u32 pmu_read_register(int idx, unsigned int offset)
{
return readl_relaxed(pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
}
static void pmu_write_register(u32 value, int idx, unsigned int offset)
{
return writel_relaxed(value, pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
}
static void pmu_disable_counter(int idx)
{
pmu_write_register(0, idx, CCI_PMU_CNTR_CTRL);
}
static void pmu_enable_counter(int idx)
{
pmu_write_register(1, idx, CCI_PMU_CNTR_CTRL);
}
static void pmu_set_event(int idx, unsigned long event)
{
event &= CCI_PMU_EVENT_MASK;
pmu_write_register(event, idx, CCI_PMU_EVT_SEL);
}
static u32 pmu_get_max_counters(void)
{
u32 n_cnts = (readl_relaxed(cci_ctrl_base + CCI_PMCR) &
CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
/* add 1 for cycle counter */
return n_cnts + 1;
}
static struct pmu_hw_events *pmu_get_hw_events(void)
{
return &pmu->hw_events;
}
static int pmu_get_event_idx(struct pmu_hw_events *hw, struct perf_event *event)
{
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hw_event = &event->hw;
unsigned long cci_event = hw_event->config_base & CCI_PMU_EVENT_MASK;
int idx;
if (cci_event == CCI_PMU_CYCLES) {
if (test_and_set_bit(CCI_PMU_CYCLE_CNTR_IDX, hw->used_mask))
return -EAGAIN;
return CCI_PMU_CYCLE_CNTR_IDX;
}
for (idx = CCI_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx)
if (!test_and_set_bit(idx, hw->used_mask))
return idx;
/* No counters available */
return -EAGAIN;
}
static int pmu_map_event(struct perf_event *event)
{
int mapping;
u8 config = event->attr.config & CCI_PMU_EVENT_MASK;
if (event->attr.type < PERF_TYPE_MAX)
return -ENOENT;
if (config == CCI_PMU_CYCLES)
mapping = config;
else
mapping = pmu_validate_hw_event(config);
return mapping;
}
static int pmu_request_irq(struct arm_pmu *cci_pmu, irq_handler_t handler)
{
int i;
struct platform_device *pmu_device = cci_pmu->plat_device;
if (unlikely(!pmu_device))
return -ENODEV;
if (pmu->nr_irqs < 1) {
dev_err(&pmu_device->dev, "no irqs for CCI PMUs defined\n");
return -ENODEV;
}
/*
* Register all available CCI PMU interrupts. In the interrupt handler
* we iterate over the counters checking for interrupt source (the
* overflowing counter) and clear it.
*
* This should allow handling of non-unique interrupt for the counters.
*/
for (i = 0; i < pmu->nr_irqs; i++) {
int err = request_irq(pmu->irqs[i], handler, IRQF_SHARED,
"arm-cci-pmu", cci_pmu);
if (err) {
dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n",
pmu->irqs[i]);
return err;
}
set_bit(i, &pmu->active_irqs);
}
return 0;
}
static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
{
unsigned long flags;
struct arm_pmu *cci_pmu = (struct arm_pmu *)dev;
struct pmu_hw_events *events = cci_pmu->get_hw_events();
struct perf_sample_data data;
struct pt_regs *regs;
int idx, handled = IRQ_NONE;
raw_spin_lock_irqsave(&events->pmu_lock, flags);
regs = get_irq_regs();
/*
* Iterate over counters and update the corresponding perf events.
* This should work regardless of whether we have per-counter overflow
* interrupt or a combined overflow interrupt.
*/
for (idx = CCI_PMU_CYCLE_CNTR_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) {
struct perf_event *event = events->events[idx];
struct hw_perf_event *hw_counter;
if (!event)
continue;
hw_counter = &event->hw;
/* Did this counter overflow? */
if (!pmu_read_register(idx, CCI_PMU_OVRFLW) & CCI_PMU_OVRFLW_FLAG)
continue;
pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW);
handled = IRQ_HANDLED;
armpmu_event_update(event);
perf_sample_data_init(&data, 0, hw_counter->last_period);
if (!armpmu_event_set_period(event))
continue;
if (perf_event_overflow(event, &data, regs))
cci_pmu->disable(event);
}
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
return IRQ_RETVAL(handled);
}
static void pmu_free_irq(struct arm_pmu *cci_pmu)
{
int i;
for (i = 0; i < pmu->nr_irqs; i++) {
if (!test_and_clear_bit(i, &pmu->active_irqs))
continue;
free_irq(pmu->irqs[i], cci_pmu);
}
}
static void pmu_enable_event(struct perf_event *event)
{
unsigned long flags;
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct pmu_hw_events *events = cci_pmu->get_hw_events();
struct hw_perf_event *hw_counter = &event->hw;
int idx = hw_counter->idx;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return;
}
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Configure the event to count, unless you are counting cycles */
if (idx != CCI_PMU_CYCLE_CNTR_IDX)
pmu_set_event(idx, hw_counter->config_base);
pmu_enable_counter(idx);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void pmu_disable_event(struct perf_event *event)
{
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hw_counter = &event->hw;
int idx = hw_counter->idx;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return;
}
pmu_disable_counter(idx);
}
static void pmu_start(struct arm_pmu *cci_pmu)
{
u32 val;
unsigned long flags;
struct pmu_hw_events *events = cci_pmu->get_hw_events();
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Enable all the PMU counters. */
val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
writel(val, cci_ctrl_base + CCI_PMCR);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void pmu_stop(struct arm_pmu *cci_pmu)
{
u32 val;
unsigned long flags;
struct pmu_hw_events *events = cci_pmu->get_hw_events();
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Disable all the PMU counters. */
val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
writel(val, cci_ctrl_base + CCI_PMCR);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static u32 pmu_read_counter(struct perf_event *event)
{
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hw_counter = &event->hw;
int idx = hw_counter->idx;
u32 value;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return 0;
}
value = pmu_read_register(idx, CCI_PMU_CNTR);
return value;
}
static void pmu_write_counter(struct perf_event *event, u32 value)
{
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hw_counter = &event->hw;
int idx = hw_counter->idx;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx)))
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
else
pmu_write_register(value, idx, CCI_PMU_CNTR);
}
static int cci_pmu_init(struct arm_pmu *cci_pmu, struct platform_device *pdev)
{
*cci_pmu = (struct arm_pmu){
.name = PMU_NAME,
.max_period = (1LLU << 32) - 1,
.get_hw_events = pmu_get_hw_events,
.get_event_idx = pmu_get_event_idx,
.map_event = pmu_map_event,
.request_irq = pmu_request_irq,
.handle_irq = pmu_handle_irq,
.free_irq = pmu_free_irq,
.enable = pmu_enable_event,
.disable = pmu_disable_event,
.start = pmu_start,
.stop = pmu_stop,
.read_counter = pmu_read_counter,
.write_counter = pmu_write_counter,
};
cci_pmu->plat_device = pdev;
cci_pmu->num_events = pmu_get_max_counters();
return armpmu_register(cci_pmu, -1);
}
static const struct of_device_id arm_cci_pmu_matches[] = {
{
.compatible = "arm,cci-400-pmu",
},
{},
};
static int cci_pmu_probe(struct platform_device *pdev)
{
struct resource *res;
int i, ret, irq;
pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
if (!pmu)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pmu->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pmu->base))
return -ENOMEM;
/*
* CCI PMU has 5 overflow signals - one per counter; but some may be tied
* together to a common interrupt.
*/
pmu->nr_irqs = 0;
for (i = 0; i < CCI_PMU_MAX_HW_EVENTS; i++) {
irq = platform_get_irq(pdev, i);
if (irq < 0)
break;
if (is_duplicate_irq(irq, pmu->irqs, pmu->nr_irqs))
continue;
pmu->irqs[pmu->nr_irqs++] = irq;
}
/*
* Ensure that the device tree has as many interrupts as the number
* of counters.
*/
if (i < CCI_PMU_MAX_HW_EVENTS) {
dev_warn(&pdev->dev, "In-correct number of interrupts: %d, should be %d\n",
i, CCI_PMU_MAX_HW_EVENTS);
return -EINVAL;
}
pmu->port_ranges = port_range_by_rev();
if (!pmu->port_ranges) {
dev_warn(&pdev->dev, "CCI PMU version not supported\n");
return -EINVAL;
}
pmu->cci_pmu = devm_kzalloc(&pdev->dev, sizeof(*(pmu->cci_pmu)), GFP_KERNEL);
if (!pmu->cci_pmu)
return -ENOMEM;
pmu->hw_events.events = pmu->events;
pmu->hw_events.used_mask = pmu->used_mask;
raw_spin_lock_init(&pmu->hw_events.pmu_lock);
ret = cci_pmu_init(pmu->cci_pmu, pdev);
if (ret)
return ret;
return 0;
}
static int cci_platform_probe(struct platform_device *pdev)
{
if (!cci_probed())
return -ENODEV;
return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
}
#endif /* CONFIG_HW_PERF_EVENTS */
struct cpu_port {
u64 mpidr;
u32 port;
};
/*
* Use the port MSB as valid flag, shift can be made dynamic
* by computing number of bits required for port indexes.
* Code disabling CCI cpu ports runs with D-cache invalidated
* and SCTLR bit clear so data accesses must be kept to a minimum
* to improve performance; for now shift is left static to
* avoid one more data access while disabling the CCI port.
*/
#define PORT_VALID_SHIFT 31
#define PORT_VALID (0x1 << PORT_VALID_SHIFT)
static inline void init_cpu_port(struct cpu_port *port, u32 index, u64 mpidr)
{
port->port = PORT_VALID | index;
port->mpidr = mpidr;
}
static inline bool cpu_port_is_valid(struct cpu_port *port)
{
return !!(port->port & PORT_VALID);
}
static inline bool cpu_port_match(struct cpu_port *port, u64 mpidr)
{
return port->mpidr == (mpidr & MPIDR_HWID_BITMASK);
}
static struct cpu_port cpu_port[NR_CPUS];
/**
* __cci_ace_get_port - Function to retrieve the port index connected to
* a cpu or device.
*
* @dn: device node of the device to look-up
* @type: port type
*
* Return value:
* - CCI port index if success
* - -ENODEV if failure
*/
static int __cci_ace_get_port(struct device_node *dn, int type)
{
int i;
bool ace_match;
struct device_node *cci_portn;
cci_portn = of_parse_phandle(dn, "cci-control-port", 0);
for (i = 0; i < nb_cci_ports; i++) {
ace_match = ports[i].type == type;
if (ace_match && cci_portn == ports[i].dn)
return i;
}
return -ENODEV;
}
int cci_ace_get_port(struct device_node *dn)
{
return __cci_ace_get_port(dn, ACE_LITE_PORT);
}
EXPORT_SYMBOL_GPL(cci_ace_get_port);
static void cci_ace_init_ports(void)
{
int port, cpu;
struct device_node *cpun;
/*
* Port index look-up speeds up the function disabling ports by CPU,
* since the logical to port index mapping is done once and does
* not change after system boot.
* The stashed index array is initialized for all possible CPUs
* at probe time.
*/
for_each_possible_cpu(cpu) {
/* too early to use cpu->of_node */
cpun = of_get_cpu_node(cpu, NULL);
if (WARN(!cpun, "Missing cpu device node\n"))
continue;
port = __cci_ace_get_port(cpun, ACE_PORT);
if (port < 0)
continue;
init_cpu_port(&cpu_port[cpu], port, cpu_logical_map(cpu));
}
for_each_possible_cpu(cpu) {
WARN(!cpu_port_is_valid(&cpu_port[cpu]),
"CPU %u does not have an associated CCI port\n",
cpu);
}
}
/*
* Functions to enable/disable a CCI interconnect slave port
*
* They are called by low-level power management code to disable slave
* interfaces snoops and DVM broadcast.
* Since they may execute with cache data allocation disabled and
* after the caches have been cleaned and invalidated the functions provide
* no explicit locking since they may run with D-cache disabled, so normal
* cacheable kernel locks based on ldrex/strex may not work.
* Locking has to be provided by BSP implementations to ensure proper
* operations.
*/
/**
* cci_port_control() - function to control a CCI port
*
* @port: index of the port to setup
* @enable: if true enables the port, if false disables it
*/
static void notrace cci_port_control(unsigned int port, bool enable)
{
void __iomem *base = ports[port].base;
writel_relaxed(enable ? CCI_ENABLE_REQ : 0, base + CCI_PORT_CTRL);
/*
* This function is called from power down procedures
* and must not execute any instruction that might
* cause the processor to be put in a quiescent state
* (eg wfi). Hence, cpu_relax() can not be added to this
* read loop to optimize power, since it might hide possibly
* disruptive operations.
*/
while (readl_relaxed(cci_ctrl_base + CCI_CTRL_STATUS) & 0x1)
;
}
/**
* cci_disable_port_by_cpu() - function to disable a CCI port by CPU
* reference
*
* @mpidr: mpidr of the CPU whose CCI port should be disabled
*
* Disabling a CCI port for a CPU implies disabling the CCI port
* controlling that CPU cluster. Code disabling CPU CCI ports
* must make sure that the CPU running the code is the last active CPU
* in the cluster ie all other CPUs are quiescent in a low power state.
*
* Return:
* 0 on success
* -ENODEV on port look-up failure
*/
int notrace cci_disable_port_by_cpu(u64 mpidr)
{
int cpu;
bool is_valid;
for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
is_valid = cpu_port_is_valid(&cpu_port[cpu]);
if (is_valid && cpu_port_match(&cpu_port[cpu], mpidr)) {
cci_port_control(cpu_port[cpu].port, false);
return 0;
}
}
return -ENODEV;
}
EXPORT_SYMBOL_GPL(cci_disable_port_by_cpu);
/**
* cci_enable_port_for_self() - enable a CCI port for calling CPU
*
* Enabling a CCI port for the calling CPU implies enabling the CCI
* port controlling that CPU's cluster. Caller must make sure that the
* CPU running the code is the first active CPU in the cluster and all
* other CPUs are quiescent in a low power state or waiting for this CPU
* to complete the CCI initialization.
*
* Because this is called when the MMU is still off and with no stack,
* the code must be position independent and ideally rely on callee
* clobbered registers only. To achieve this we must code this function
* entirely in assembler.
*
* On success this returns with the proper CCI port enabled. In case of
* any failure this never returns as the inability to enable the CCI is
* fatal and there is no possible recovery at this stage.
*/
asmlinkage void __naked cci_enable_port_for_self(void)
{
asm volatile ("\n"
" .arch armv7-a\n"
" mrc p15, 0, r0, c0, c0, 5 @ get MPIDR value \n"
" and r0, r0, #"__stringify(MPIDR_HWID_BITMASK)" \n"
" adr r1, 5f \n"
" ldr r2, [r1] \n"
" add r1, r1, r2 @ &cpu_port \n"
" add ip, r1, %[sizeof_cpu_port] \n"
/* Loop over the cpu_port array looking for a matching MPIDR */
"1: ldr r2, [r1, %[offsetof_cpu_port_mpidr_lsb]] \n"
" cmp r2, r0 @ compare MPIDR \n"
" bne 2f \n"
/* Found a match, now test port validity */
" ldr r3, [r1, %[offsetof_cpu_port_port]] \n"
" tst r3, #"__stringify(PORT_VALID)" \n"
" bne 3f \n"
/* no match, loop with the next cpu_port entry */
"2: add r1, r1, %[sizeof_struct_cpu_port] \n"
" cmp r1, ip @ done? \n"
" blo 1b \n"
/* CCI port not found -- cheaply try to stall this CPU */
"cci_port_not_found: \n"
" wfi \n"
" wfe \n"
" b cci_port_not_found \n"
/* Use matched port index to look up the corresponding ports entry */
"3: bic r3, r3, #"__stringify(PORT_VALID)" \n"
" adr r0, 6f \n"
" ldmia r0, {r1, r2} \n"
" sub r1, r1, r0 @ virt - phys \n"
" ldr r0, [r0, r2] @ *(&ports) \n"
" mov r2, %[sizeof_struct_ace_port] \n"
" mla r0, r2, r3, r0 @ &ports[index] \n"
" sub r0, r0, r1 @ virt_to_phys() \n"
/* Enable the CCI port */
" ldr r0, [r0, %[offsetof_port_phys]] \n"
" mov r3, %[cci_enable_req]\n"
" str r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n"
/* poll the status reg for completion */
" adr r1, 7f \n"
" ldr r0, [r1] \n"
" ldr r0, [r0, r1] @ cci_ctrl_base \n"
"4: ldr r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n"
" tst r1, %[cci_control_status_bits] \n"
" bne 4b \n"
" mov r0, #0 \n"
" bx lr \n"
" .align 2 \n"
"5: .word cpu_port - . \n"
"6: .word . \n"
" .word ports - 6b \n"
"7: .word cci_ctrl_phys - . \n"
: :
[sizeof_cpu_port] "i" (sizeof(cpu_port)),
[cci_enable_req] "i" cpu_to_le32(CCI_ENABLE_REQ),
[cci_control_status_bits] "i" cpu_to_le32(1),
#ifndef __ARMEB__
[offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)),
#else
[offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)+4),
#endif
[offsetof_cpu_port_port] "i" (offsetof(struct cpu_port, port)),
[sizeof_struct_cpu_port] "i" (sizeof(struct cpu_port)),
[sizeof_struct_ace_port] "i" (sizeof(struct cci_ace_port)),
[offsetof_port_phys] "i" (offsetof(struct cci_ace_port, phys)) );
unreachable();
}
/**
* __cci_control_port_by_device() - function to control a CCI port by device
* reference
*
* @dn: device node pointer of the device whose CCI port should be
* controlled
* @enable: if true enables the port, if false disables it
*
* Return:
* 0 on success
* -ENODEV on port look-up failure
*/
int notrace __cci_control_port_by_device(struct device_node *dn, bool enable)
{
int port;
if (!dn)
return -ENODEV;
port = __cci_ace_get_port(dn, ACE_LITE_PORT);
if (WARN_ONCE(port < 0, "node %s ACE lite port look-up failure\n",
dn->full_name))
return -ENODEV;
cci_port_control(port, enable);
return 0;
}
EXPORT_SYMBOL_GPL(__cci_control_port_by_device);
/**
* __cci_control_port_by_index() - function to control a CCI port by port index
*
* @port: port index previously retrieved with cci_ace_get_port()
* @enable: if true enables the port, if false disables it
*
* Return:
* 0 on success
* -ENODEV on port index out of range
* -EPERM if operation carried out on an ACE PORT
*/
int notrace __cci_control_port_by_index(u32 port, bool enable)
{
if (port >= nb_cci_ports || ports[port].type == ACE_INVALID_PORT)
return -ENODEV;
/*
* CCI control for ports connected to CPUS is extremely fragile
* and must be made to go through a specific and controlled
* interface (ie cci_disable_port_by_cpu(); control by general purpose
* indexing is therefore disabled for ACE ports.
*/
if (ports[port].type == ACE_PORT)
return -EPERM;
cci_port_control(port, enable);
return 0;
}
EXPORT_SYMBOL_GPL(__cci_control_port_by_index);
static const struct cci_nb_ports cci400_ports = {
.nb_ace = 2,
.nb_ace_lite = 3
};
static const struct of_device_id arm_cci_matches[] = {
{.compatible = "arm,cci-400", .data = &cci400_ports },
{},
};
static const struct of_device_id arm_cci_ctrl_if_matches[] = {
{.compatible = "arm,cci-400-ctrl-if", },
{},
};
static int cci_probe(void)
{
struct cci_nb_ports const *cci_config;
int ret, i, nb_ace = 0, nb_ace_lite = 0;
struct device_node *np, *cp;
struct resource res;
const char *match_str;
bool is_ace;
np = of_find_matching_node(NULL, arm_cci_matches);
if (!np)
return -ENODEV;
cci_config = of_match_node(arm_cci_matches, np)->data;
if (!cci_config)
return -ENODEV;
nb_cci_ports = cci_config->nb_ace + cci_config->nb_ace_lite;
ports = kcalloc(sizeof(*ports), nb_cci_ports, GFP_KERNEL);
if (!ports)
return -ENOMEM;
ret = of_address_to_resource(np, 0, &res);
if (!ret) {
cci_ctrl_base = ioremap(res.start, resource_size(&res));
cci_ctrl_phys = res.start;
}
if (ret || !cci_ctrl_base) {
WARN(1, "unable to ioremap CCI ctrl\n");
ret = -ENXIO;
goto memalloc_err;
}
for_each_child_of_node(np, cp) {
if (!of_match_node(arm_cci_ctrl_if_matches, cp))
continue;
i = nb_ace + nb_ace_lite;
if (i >= nb_cci_ports)
break;
if (of_property_read_string(cp, "interface-type",
&match_str)) {
WARN(1, "node %s missing interface-type property\n",
cp->full_name);
continue;
}
is_ace = strcmp(match_str, "ace") == 0;
if (!is_ace && strcmp(match_str, "ace-lite")) {
WARN(1, "node %s containing invalid interface-type property, skipping it\n",
cp->full_name);
continue;
}
ret = of_address_to_resource(cp, 0, &res);
if (!ret) {
ports[i].base = ioremap(res.start, resource_size(&res));
ports[i].phys = res.start;
}
if (ret || !ports[i].base) {
WARN(1, "unable to ioremap CCI port %d\n", i);
continue;
}
if (is_ace) {
if (WARN_ON(nb_ace >= cci_config->nb_ace))
continue;
ports[i].type = ACE_PORT;
++nb_ace;
} else {
if (WARN_ON(nb_ace_lite >= cci_config->nb_ace_lite))
continue;
ports[i].type = ACE_LITE_PORT;
++nb_ace_lite;
}
ports[i].dn = cp;
}
/* initialize a stashed array of ACE ports to speed-up look-up */
cci_ace_init_ports();
/*
* Multi-cluster systems may need this data when non-coherent, during
* cluster power-up/power-down. Make sure it reaches main memory.
*/
sync_cache_w(&cci_ctrl_base);
sync_cache_w(&cci_ctrl_phys);
sync_cache_w(&ports);
sync_cache_w(&cpu_port);
__sync_cache_range_w(ports, sizeof(*ports) * nb_cci_ports);
pr_info("ARM CCI driver probed\n");
return 0;
memalloc_err:
kfree(ports);
return ret;
}
static int cci_init_status = -EAGAIN;
static DEFINE_MUTEX(cci_probing);
static int cci_init(void)
{
if (cci_init_status != -EAGAIN)
return cci_init_status;
mutex_lock(&cci_probing);
if (cci_init_status == -EAGAIN)
cci_init_status = cci_probe();
mutex_unlock(&cci_probing);
return cci_init_status;
}
#ifdef CONFIG_HW_PERF_EVENTS
static struct platform_driver cci_pmu_driver = {
.driver = {
.name = DRIVER_NAME_PMU,
.of_match_table = arm_cci_pmu_matches,
},
.probe = cci_pmu_probe,
};
static struct platform_driver cci_platform_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = arm_cci_matches,
},
.probe = cci_platform_probe,
};
static int __init cci_platform_init(void)
{
int ret;
ret = platform_driver_register(&cci_pmu_driver);
if (ret)
return ret;
return platform_driver_register(&cci_platform_driver);
}
#else
static int __init cci_platform_init(void)
{
return 0;
}
#endif
/*
* To sort out early init calls ordering a helper function is provided to
* check if the CCI driver has beed initialized. Function check if the driver
* has been initialized, if not it calls the init function that probes
* the driver and updates the return value.
*/
bool cci_probed(void)
{
return cci_init() == 0;
}
EXPORT_SYMBOL_GPL(cci_probed);
early_initcall(cci_init);
core_initcall(cci_platform_init);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ARM CCI support");