linux/drivers/media/video/davinci/Kconfig
Vaibhav Hiremath 540069010d V4L/DVB: vpfe_capture: Create separate Kconfig file for davinci devices
Currently VPFE Capture driver and DM6446 CCDC driver is being
reused for AM3517. So this patch is preparing the Kconfig/makefile
for re-use of such IP's.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:30:36 -03:00

94 lines
2.9 KiB
Plaintext

config DISPLAY_DAVINCI_DM646X_EVM
tristate "DM646x EVM Video Display"
depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
select VIDEOBUF_DMA_CONTIG
select VIDEO_DAVINCI_VPIF
select VIDEO_ADV7343
select VIDEO_THS7303
help
Support for DM6467 based display device.
To compile this driver as a module, choose M here: the
module will be called vpif_display.
config CAPTURE_DAVINCI_DM646X_EVM
tristate "DM646x EVM Video Capture"
depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
select VIDEOBUF_DMA_CONTIG
select VIDEO_DAVINCI_VPIF
help
Support for DM6467 based capture device.
To compile this driver as a module, choose M here: the
module will be called vpif_capture.
config VIDEO_DAVINCI_VPIF
tristate "DaVinci VPIF Driver"
depends on DISPLAY_DAVINCI_DM646X_EVM
help
Support for DaVinci VPIF Driver.
To compile this driver as a module, choose M here: the
module will be called vpif.
config VIDEO_VPSS_SYSTEM
tristate "VPSS System module driver"
depends on ARCH_DAVINCI
help
Support for vpss system module for video driver
config VIDEO_VPFE_CAPTURE
tristate "VPFE Video Capture Driver"
depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
select VIDEOBUF_DMA_CONTIG
help
Support for DMx/AMx VPFE based frame grabber. This is the
common V4L2 module for following DMx/AMx SoCs from Texas
Instruments:- DM6446, DM365, DM355 & AM3517/05.
To compile this driver as a module, choose M here: the
module will be called vpfe-capture.
config VIDEO_DM6446_CCDC
tristate "DM6446 CCDC HW module"
depends on VIDEO_VPFE_CAPTURE
select VIDEO_VPSS_SYSTEM
default y
help
Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
with decoder modules such as TVP5146 over BT656 or
sensor module such as MT9T001 over a raw interface. This
module configures the interface and CCDC/ISIF to do
video frame capture from slave decoders.
To compile this driver as a module, choose M here: the
module will be called vpfe.
config VIDEO_DM355_CCDC
tristate "DM355 CCDC HW module"
depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
select VIDEO_VPSS_SYSTEM
default y
help
Enables DM355 CCD hw module. DM355 CCDC hw interfaces
with decoder modules such as TVP5146 over BT656 or
sensor module such as MT9T001 over a raw interface. This
module configures the interface and CCDC/ISIF to do
video frame capture from a slave decoders
To compile this driver as a module, choose M here: the
module will be called vpfe.
config VIDEO_ISIF
tristate "ISIF HW module"
depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
select VIDEO_VPSS_SYSTEM
default y
help
Enables ISIF hw module. This is the hardware module for
configuring ISIF in VPFE to capture Raw Bayer RGB data from
a image sensor or YUV data from a YUV source.
To compile this driver as a module, choose M here: the
module will be called vpfe.