linux/drivers/iio
Manivannan Sadhasivam 7c5bc7e87c iio:temperature:tmp007: Add irq and threshold events support
This patch adds ALERT irq and limit threshold events support for TI TMP007 - 16 bit IR thermopile sensor with integrated
math engine.

Following threshold events are supported:
1. TObj high limit
2. TObj low limit
3. TDie high limit
4. TDie low limit

Signed-off-by: Manivannan Sadhasivam <manivannanece23@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-05 10:28:25 +00:00
..
accel iio: accel: Add driver for the Analog Devices ADXL345 3-axis accelerometer 2017-02-05 09:08:40 +00:00
adc iio: stx104: Add GPIO set_multiple callback function support 2017-02-01 18:50:54 +00:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
chemical iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value 2016-10-23 22:18:27 +01:00
common First round of new device support, features and cleanups for IIO in the 4.11 cycle. 2017-01-19 10:40:44 +01:00
counter iio: 104-quad-8: Fix active level mismatch for the preset enable option 2016-12-03 10:08:09 +00:00
dac iio: dac: ad5593r: Add ACPI support 2016-12-30 17:20:14 +00:00
dummy iio:dummy: Stop enabling timestamp by default. 2017-01-10 19:54:55 +00:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio: common: ssp_sensors: gyro: use devm_iio_device_register() 2017-01-28 12:16:17 +00:00
health iio: health: add MAX30102 oximeter driver support 2017-02-05 09:45:00 +00:00
humidity iio: humidity: Support acpi probe for hts211 2016-12-03 08:56:28 +00:00
imu iio: imu: st_lsm6dsx: add support to lsm6ds3h 2017-02-04 12:25:05 +00:00
light iio: cros_ec_light_prox: add ChromeOS EC Light and Proximity Sensors 2017-02-04 12:29:52 +00:00
magnetometer iio: magnetometer: mag3110: claim direct mode during raw writes 2017-01-21 12:20:40 +00:00
orientation iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) 2016-11-05 17:47:47 +00:00
potentiometer iio: max5481: Add support for Maxim digital potentiometers 2017-01-28 12:13:31 +00:00
potentiostat iio: potentiostat: add LMP91000 support 2016-09-27 20:33:03 +01:00
pressure iio: cros_ec: Add cros_ec barometer driver 2017-01-28 15:07:46 +00:00
proximity iio: distance: add devantech us ranger srf04 2017-02-04 12:19:20 +00:00
temperature iio:temperature:tmp007: Add irq and threshold events support 2017-02-05 10:28:25 +00:00
trigger Immutable branch between MFD, IIO and PWM due for the v4.11 merge window 2017-01-28 18:21:49 +00:00
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
iio_core_trigger.h
industrialio-buffer.c iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio: trigger: clean up viio_trigger_alloc() 2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: inkern: pass through raw values if no scaling 2017-01-14 12:20:18 +00:00
Kconfig iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
Makefile iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00